To make a Connection / RELATIONSHIP, Don't forget to press the subscribe button with bell icon to get the latest notifications. My channel :) kzread.info/dron/w9kSuR1bTFBmaMEyD_DXvQ.html

@immortalstructures663

4 жыл бұрын

Hey brother.....I have problems with understanding steel distribution in designing preferences....and steel dia.....

Really Appreciate your Series of videos on different softwares. Nice job dear

M HUSSAIN SIR ,GOOD TUTORIALS THANK YOU SO MUCH SIR

@civilmdc

4 жыл бұрын

You are most welcome

👍🏻

Hi! Is the LL case applied to all slabs simultaniusly? Or the SAFE automaticly takes LL for each slab "in separate load case"? For example to create envelope of bending moments. If SAFE doesn't do that, can you show us how to create such an analysis (with LL put on separate slab spans). Thanks

Suppose my building is in High seismic zone then also I have to design slab only for DL & LL. ? If not then how to apply seismic load in SAFE for the slab design.

Thanks a bunch for the tutorial.How do we then design a cantilever slab in safe?

@civilmdc

5 жыл бұрын

For that, dear, you have to select the one edge of slab and assign it ....point fixed restraint.. then cantilever slab will be drawn ... if you will unable please let me know...

@danieldabatyough2807

5 жыл бұрын

@@civilmdc Thanks so much for the prompt reply.I will try it and get back to you,once again,thanks.

@civilmdc

5 жыл бұрын

@@danieldabatyough2807 Sure, Best of Luck

what about the seismic forces sir? do we need to include it ?

how to model sloped footing with varied thickness in safe

make video about waffale slab

Dear Sir. Thank you for your tutorial video. But I would to known how to check the depth of slab that pass or not? From Laos😊

@civilmdc

2 жыл бұрын

Apply Check minimum depth check of ACI, MANUAL

@sonephetphoumma7956

2 жыл бұрын

Thank you for your reply. Wish you Have good health

If it is a Multistorey building then? let's say G+10 then for slab design do we have to model complete building or only one floor ???

@civilmdc

4 жыл бұрын

Each floor separately will be model... Or you can import from etabs... (if each floor is different)

@civilmdc

4 жыл бұрын

One floor... If.... All floor are same...

@sirajudheench2445

4 жыл бұрын

@@civilmdc Jazakallahu khair. That means if all the floors beams and columns are same then we have to do slab design only once. Provided loading on the slab is same. Am I right ?

u didnt respect the local axis while drawing, its very important.

@civilmdc

4 жыл бұрын

Yes you are right... M11,, m22 m12 etc W.r.t local Axis is important. We must have to incorporate w.r.t them.

Sir please can you share me the crack for CSI Safe?

@civilmdc

2 жыл бұрын

Please visit civilmdc.com you will easily get it.