You were the inspiration that got me started mining and that love has spread to many many friends. Appreciate all you do!

@HashRaptor

3 жыл бұрын

That made my day my friend. Thanks for sharing and welcome to the mining community!

Many thanks for the shed update Raptor. I can't wait for the Chia build

Marvellous setup. Very clean and well managed👍

Nice vid. Always up for learning new mining tips and tricks

Your vids got me into mining, now im 13 gpus strong! Also im excited to see your Chia content, im looking into that myself atm

Love the Xpower DUST BLASTER. Appreciate you HR

@HashRaptor

3 жыл бұрын

Hehe, yes I blow dry my hair with it as well ;)

@AlteredComponent

3 жыл бұрын

@@HashRaptor be careful. I did that and now, #bald

Nice video bro.Love your videos.

Have you considered moving the rigs to the middle of the room, hang plastic clear door flaps you see on walk in freezer doors from the roof and completely encompass the rigs in the center of the room? Look up Acepunch Clear PVC Smooth Plastic Strip Door Curtain 4x7. Snug them all the way up to the top of your ceiling leaving no spaces except to tube air out. Leave a space of about 6 inches at the bottom of the clear flaps you have surrounded your rigs with. Now you are pulling cool air from the lowest point inside your shed, you are trapping the hot air within the plastic clear flaps and now you funnel your air from the top of the inside of your rig clear flap enclosure and tube the air out of the shed with your fans. You also get the advantage of being about to go 360 degrees around your rigs for maintenance. You can get these flaps cheap, hang them from the ceiling easily and send the air directly out of your room by adding an "insulated" tube directly to your exhaust fan. Insulated tube so the tube itself does not return heat back into the shed. I have done datacenter designs for a long time with many concepts also have built just stand alone server rooms for many companies over the decades. This concept is best your size it is maximum efficiency to remove heat for cost. Hope that helps.

Love your videos. Very detailed and fun to watch. Please keep uploading more content. Love from India

@HashRaptor

3 жыл бұрын

So kind. Thank you! I hope you are doing great over there. Love goes out to India!

@alphaab473

3 жыл бұрын

@@HashRaptor yes I am doing great. Hope the same for you and your family. Learning good stuff of mining on your channel. On my way building my first rig of 6x1660ti diy. Hope all goes good.

Awesome video. Thank you for the inspiration! Hope to duplicate your shed setup within 6 months. Thank you for paving the way and sharing what you've learned. Where did you find your part shelf and bins? Been looking at ideas on Amazon and yours is the best I've seen.

That farm is nice man.... wish I had all of them GPUs.... very cool just I can just image the price spent on all of that

Go Raptor go! 30min a day sounds right

Excellent video. I am currently mining with a 4GB GPU configuration, because it is almost impossible to get larger GPU's where I live. I am contemplating Chia mining so looking forward to your content regarding proof of space mining.

All ways good vibes for the hash raptor 🧘

Would be useful to make a video on what you are looking for on updates and security, how often, and how to identify phantom power issues? Great stuff HR!

@HashRaptor

3 жыл бұрын

Yes, great idea!

@jeanvion44

3 жыл бұрын

@@HashRaptor awesome because I haven't done any updates since I started mining on HiveOS :-)

Also, i am from Houston... Where heat and humidity reign. It gets up to around 95 - 105 degrees with 80+ humidity in August, which will rip apart computer components. I have a spot cooler to cool down the room that everything is in.

I know all about the south eastern Pollen living here in Ga in April my Silver car usually is a shade of Green LOL. I'm an IT guy and have been thinking of starting mining might try one or two cards to see how it goes (If I can find some) Thanks for sharing Brother.

Awesome video man, thank you! Just curious which mini-monitors you were using for your rig? Those are exactly what I am looking for!

Man, you aint joking about the pollen. Been especially bad in Alabama this year too. Honestly, i miss winter. When i startex mining, was easy to get my mom onboard with the idea when the gpus were heating the house more efficiently than the heaters lol Btw, i have that same infrared thermometer lol amazon, right? Also, if youre near central Alabama and ever need any hardware or assistance from a technician, im happy to help. I have everything from fans, ssds, electrical licensing lol just no spare gpus. Cheers brother!

Hey raptor maybe I’m not seeing it I can seem to find those switches you use? Do they work ok with 240 and my pdu. I’m trying to figure out a solution why I’m in vacation for remote shut downs. I used wemos when I was on normal plugs but not I can’t seem to find a remote option. Thanks

I just plug and play now, after I put automatic login, mining on startop and overclocks on startup, I’ve basically forgot i have mining rigs

Amazing video, just wondering what is the temperature in the room. I have a shed same size as yours so I am wondering how high does the temperature go. I am in toronto, canada so we are a bit colder than the south.

Not sure if you noticed afterwards but you didn't need the thermometer the green light on the Riser with red

Question for you. I noticed you have more than 4 rigs in HiveOs. I am abkut to cross that threshold and am wondering is it hard to setup payment or even better is it worth getting that 5th rig? I been hesitant on making the leap. Appreciate anyone's input or thier experience. ( possible new video content)

Great vid, could you make video about howto secure hive?

Can you hot swap risers and gpu power to any server psu withput shutting down?

It's interesting the names that people give their rigs. I have seen a few "Star Wars" themed.... Mine? Breaking Bad... Blue.Sky Pollos.Hermanos Methylamine Heisenberg

@HashRaptor

3 жыл бұрын

I love this! Breaking Bad is one of our favorite shows of all time!

How much did this cost and how long it will take for investment to be returned?

Vary nice setup. What's the best program to mine with? And what's your profit a day? I am new to this. Thank you for your time and videos.

Hello! Nice video. Why is the reason you prefer SSD vs USB3.0??

Bro after using HiveOS how to get back in Windows OS?

How hot is the VRAM on your 30 series cards? , Mine is always between 90⁰C to 100⁰C , will that burn out the card?

Sir how to install AMD/Nvidia Driver in HiveOs?

Do you have any kingwin 8gpu frame rig? I can't find any videos online. I think it maybe similar to veddha frame.

Hi, nice video, I want to ask you, what do you think it cost to pay some to do the maintenance for miner?

the Silicon SSD 128gb is the way to go :)

After I upgraded my filters and added a 2nd zone of filters , I never have to blow dust off. It was the best investment I ever did.

@AAA-cc4pg

2 жыл бұрын

Upgraded?

How much does al of this cost??? Like a rough estimate. And how much does it make on a monthly basis?

Why don't you put a block fan in front of the bottom air vent, with the air flow facing inward. Tape a furnace filter over the side facing the vent. As the the air is pulled from outside an into the fan it will be filtered and also creat more of a draft, as it is pulling the air in, as opposed to it just flowing in naturally. You could even do the same thing on the top vent, just reversing the fan air flow direction and placing the filter on the side facing the room. It is similar to dust collection of free floating dust in a woodworking shop.

61 small lol, whats the total....hashrate XD

noice

Do you have the fans blowing on the cards or pulling from the cards?

@HashRaptor

3 жыл бұрын

So there are “cool air” vents behind the rigs on the wall. A few rigs have fans in the back pushing air onto the GPU’s (pulling air from the vents) and then fans on the front of the rigs pulling air across.

@GreenMeanie101

3 жыл бұрын

@@HashRaptor Thanks, I was wondering because the cards being in the open just seem like pulling wouldn't help without them being in a case to me. I was thinking of setting mine to blow on the cards and was wondering if there would be any reason not to do that?

have you thought of getting an air purifier to reduce the amount of times you dust? just a thought

Do you have a link to the teller WiFi switches ? Will they work on 220v power?

@HashRaptor

3 жыл бұрын

Hey, they removed them from Amazon. Checkout store.HashRaptor.com for the one’s I’m currently trying.

I've been using Hiveos mining Eth, converting to BTC on NiceHash. I don't quite get the maximum overclocked hashrate as most people (59mh on both my 3070's). Plus, my rigs get a lot stale shares time to time. Do you think my 4 gigs of ram has anything to do with this?

@MrPinkyRingy

3 жыл бұрын

Stale shares mostly have to do with PING.

why gpu intead of asic? with such money power you could some 3 or 5 asic wich would have more hash power than these gpu. I think, maybe not but this is my guess.

Do you have any recommendations on how to get cards these days?

hi bro, what application do you use for mining on a PC the same as on a cellphone? thx u

@HashRaptor

3 жыл бұрын

Well for mining on PC, I like TRex. I've never mined on a cell phone, but if you are talking about a wallet, I like Coinomi

Great video, How do you have the smart switch control the motherboard if your on 240v ? I'm guessing the motherboard is on the ATX power supply at 120v with the smart switch and the GPU's are on the sever power supply at 240v. I know video's take time but a more details walk though would be nice to see if you can. Keep living the dream Sir. love the content.

@HashRaptor

3 жыл бұрын

Great question. I actually covered this in a previous video which is why I didn’t go into it today. I believe it was this one kzread.info/dash/bejne/qpV_srWRYtfPYdY.html. Hope it helps!

@HashRaptor

3 жыл бұрын

Everything is on 240v

@HashRaptor

3 жыл бұрын

Rewatching that video now. It shows the setup (and discovery) well. Just make sure if you get a Teckin wifi switch or competitor that is 3 prong, make sure it is rated for 240v on the back of the device. Sometimes in Amazon they say it is rated for 240, but what you get is only rated for 120v.

@slicknick8713

3 жыл бұрын

@@HashRaptor Thx Sir, that video I haven't seen yet and yes it was the right video.

how many hash you getting out of all these rigs?

Hi sir is still worth to build GPU mining or it's too late for building it?

As someone who have messed with mineral oil cooling for years, please, please, don't do it. It's just a hassle and the GPU is practically permanently dirty afterwards. It's just a mess.

Linus tech tips showed how submerged pc parts last, the pc parts start to fall apart, they were not designed to be in liquid, Chips were falling off the parts etc.

@HashRaptor

3 жыл бұрын

Oh, I'll google that. Happen to have a link? Want to watch :)

@bkfill

3 жыл бұрын

​@@HashRaptor Thank you for the reply, Here you go kzread.info/dash/bejne/q3WOtLKRh9zFnrA.html And kzread.info/dash/bejne/Yo6mutmqZbCucpM.html

Can you put a link to the wifi switches please

@HashRaptor

3 жыл бұрын

Hey they removed the ones I usually use on Amazon. I'm trying the kasa smart plugs. just make sure anything you test supports the wattage and amps (usually 15 amps) for what you need. Good luck!

@calminer7949

3 жыл бұрын

@@HashRaptor thanks again will do!

You can mine Vertcoin with a 2gb gpu

I like how the title says small crypto mining farm. That is not small. I only have 4 RTX 3080.

@HashRaptor

3 жыл бұрын

LOL, thanks man. Been working hard to build up. Frustrated in this day that I didn’t get more before the spike in crypto recently.

@KayJay01

3 жыл бұрын

That's still 4 3080's :) I only have a 3070 and two 1070s.

What do you plan on doing with all your GPU’s after ethereum 2.0 goes POS?

ssd's the way to go, mining from usb eventually causes problems.

How long is a GPU to live?

@HashRaptor

3 жыл бұрын

Mine have been running for 3 years + now. Only had 2 die, and not even sure it was due to mining. Both were replaced with new units via the RMA program.

um a portable ac or a window unit ....

I only have 3 gpus and I check at least 1 hour a day. Iam crazy???

@HashRaptor

3 жыл бұрын

haha, no those are you babies.

wtf. Remote start what is that. need more infor plz :))

Vertcoin mining for a 2gb card :)

MAke a tiktok rapter

I´m soooooooooooooooooooooo late for this, Ethereum mining is almost dead, soooooooooooooo sad RIP :/

@divery4eyes

3 жыл бұрын

why so sad? alt season is in full swing. get to mining mining almost anything makes money

@sempiterno3243

3 жыл бұрын

​@@divery4eyes I could built a 1660 super x6 rig, 3.400 USD, but with upcoming eip 1559 and end of ETH 1.0 I will no be able to recover the investment, and with coins like Raven you get less and price seems unstable, and once everyone switches to Raven more difficult, less profit will get. ( I'm not an expert at this, just started reading)

@divery4eyes

3 жыл бұрын

@@sempiterno3243 dont go all out, just get one and mine and then wait and see. if possible get another, rinse and repeat.

I read about Andrew Samwick when I first started watching educational videos on bitcoin. I contac ted him in weeks he helped me grow my small portfolio of Bitcoin from 0.08 to 0.3 btc. Bitcoin heading for 70k got me smiling❤️

@evanrodriguez4990

3 жыл бұрын

I have been looking for a way to go about trading, the fact i am a newbie i believe i need someone that understands that market, someone to give me all the right advice i need investing, thank you for sharing this helpful post

@kaleighridley6787

3 жыл бұрын

@@evanrodriguez4990 ͲeIgram (@andrewsamwick)

@byronbailey4074

3 жыл бұрын

If you are serious about making insane profits in the crypto space, I'd advise you to contact Mr Andrew

@cathyhall5353

3 жыл бұрын

Crypto trading is not as easy as everyone thinks , you have to understand the risks, Andrew has helped me understand the in and out about trading .

@carolynjenkins5920

3 жыл бұрын

I have been getting the best from using his trading system

Sir how can i contact you