This useful tutorial by Revit Pure enhances the ladder family by having an angle parameter: revitpure.com/blog/heroic-ladder.

Very nice explanation! Thanks a lot!

@BIMforInteriorDesign

6 күн бұрын

I am glad the tutorial was helpful.

I followed this through two times. I learned so much! I needed to create a ladder for a loft and this was so clear. Thank you!

@BIMforInteriorDesign

Жыл бұрын

I am glad the tutorial helped you :)

Thank you sir, your tutorial very informative. Learned a lot from your tutorial keep it up for the good work.

@BIMforInteriorDesign

3 жыл бұрын

Hi Mike, I am glad it helped.

WONDERFUL!! THANK YOU VERY MUCH FOR YOUR HELP!!

That was really helpful tutorial and an introducton to arrays inside families! I'm on my way to masrer such adjustable families so thanks a lot for this clear explanation!

@BIMforInteriorDesign

Жыл бұрын

Glad it was helpful!

Thanks very much for your tutorial, learnt a lot.. keep it up!

@BIMforInteriorDesign

2 жыл бұрын

I am glad it helped!

Very useful information and nice presentation👌 Thank u...

@BIMforInteriorDesign

3 жыл бұрын

Thank you.

Amazing knowledge - Thankyou

Thanks a lot for the clear explanations. You could add another parameter to your Revit family to make the spacing between all of the rungs the same. As your first, last and the middle rungs' spacings are not the same in most of the times? For making the spacing equal you need to put the following formula: the rung offset or spacing can be equal to (total height/(number of rungs+1)) and you can remove the rung number formulas. In your formula you don't have the number of the rungs but you have the total height and rung offset/spacing. In my formula you can first devide the total height to the prefferd amount of spacing between the rungs and then put the result number minus one for the number of the rugs. This gives you a ladder with an equal spacing between the rungs.

@BIMforInteriorDesign

Жыл бұрын

That's a cool idea, thanks for sharing.

excellent video!

@BIMforInteriorDesign

2 жыл бұрын

Thanks.

Really good ! Thanks 😉

@BIMforInteriorDesign

7 ай бұрын

Glad you like it!

Nice Tutorial

@BIMforInteriorDesign

3 ай бұрын

Thanks.

Thank you

@BIMforInteriorDesign

2 жыл бұрын

You are welcome.

Mate, thank you for this tutorial. Is there any way that this family can also incorporate the count of rungs as you stretch it up? So, to elaborate on my question, is there a way to add the number '1' next to first rung, number '2', next to second rung. . . . . .number '10' next to the tenth rung? Cheers to all !

@BIMforInteriorDesign

5 ай бұрын

Hi, I think it might be doable, I just don't know how from the top of my head :). You might play with the visibility of the numbers in relation to the length, even though this is not the most elegant solution.

@itatabisine6250

5 ай бұрын

Thanks mate. I'll try to muck around with it and if I find the answer, I'll post it for you ;) Cheers from down under @@BIMforInteriorDesign

@BIMforInteriorDesign

5 ай бұрын

Yep, let us know if you find a solution. 👍

Excellent tutorial, thank you. But, say for example that I want my ladder to be in an angle... how could I make a new parameter with the angle information? Thanks!

@BIMforInteriorDesign

2 жыл бұрын

There are several ways to rotate the family. I would do it this way: 1) first have to edit the family and change it to ""Work Plane-Based" and disable "Always Vertical" in the Family Category and Parameters 2) Create angled reference plane in your project 3) select this angled reference plane as a host for the ladder family 4) now when you change the angle of the reference plane, the angle of ladder changes too You can also use adaptive component family as demonstrated in this video: kzread.info/dash/bejne/lZZnr6ekgpiuY8Y.html

hi tom this is so helpful..can you also do a angled rung ladder when angle is parametric? thank you so much in advance! god bless!

@BIMforInteriorDesign

10 ай бұрын

Thanks for suggestion, I might get to creating angled ladder in the future. I am currently quite busy, so don't have time for creating tutorials.

Thanks for the tutorial sir, it's helpful. What happens if we didn't round-up in formula. I tried it but didn't found in which case it will fail.

@BIMforInteriorDesign

2 жыл бұрын

Hi Akhil, if we didn't round up, the ladder would have too many rungs (one more than desired) in case we set overall length of the ladder to be multiple of 'rung distance'. For instance if rung distance is set to 300mm and overall height of the ladder 3000mm. Tom

I'm Brazilian, here is an English and Revit course together kkk 😂🤪

Hello, if you want to make an instance the width of the ladder, how do you handle the constrains of the rungs?

@BIMforInteriorDesign

26 күн бұрын

Hi, you would have to parametrize the ladder further. But this should not be too complicated. You can see how to create simple parametric family in this tutorial: kzread.info/dash/bejne/qGWho5SoesqYgrA.htmlsi=8wXItwnPTjqS4UoE

Hi, I have a problem, when I adjust the height manually, all the steps are hidden. What can I do? I like your content thank you

@BIMforInteriorDesign

Ай бұрын

I am not sure what might cause that problem.

Can i make it slanted?

@BIMforInteriorDesign

6 ай бұрын

Hi, not with the family form the tutorial. You could just rotate it - but you would have to use user-defined plane in the project to place the ladder on this plane.

Sir the file is in a higher version of Revit can you share Revit 2020 version file?

@BIMforInteriorDesign

2 жыл бұрын

Sorry Raj, I can't. I am using Revit 2022 and I can not save to older versions. It is Revit's limitation.

@rdvizstudio

2 жыл бұрын

@@BIMforInteriorDesign okay sir no issues

@JacobBanman

2 жыл бұрын

@@rdvizstudio just make it in your version. This video will walk you through every step anyways

@ahmedyasser-gw8wt

2 жыл бұрын

Thank you for sharing this video with us. it is very useful 😍

If the lenght 300?

@BIMforInteriorDesign

2 жыл бұрын

That is a corner case. You could solve it with adding another parameter (IF smaller than 300, than don't take that number into account). With this ladder I supposed nobody would want to have it shorter than 300mm :)

@AhmadChesti

Жыл бұрын

@@BIMforInteriorDesign can you please show what this formula is ((IF smaller than number, than don't take that number into account).