Creality Print 5.0 - Tips and Tricks
Here are some tips/tricks on how to use Creality Print 5.0. In its current release, it does have some glitches and issues, so in the video I will be covering the ones that I have found and some ways to get around them.
For a great 3D Printer - amzn.to/4bLt3A0
Nebula Camera - Monitor your prints remotely - amzn.to/4bLEt75
Tool Kit - amzn.to/45gx117
Here is a link to my Patreon if you would like to support the channel - / laylabaustralia
#3dprinter #3dprinted #enderman
Timestamps:
00:00 Intro
00:38 - Not Waiting For Temp to Stabilise
1:37 - Presets Not Saving/Grouping Properly
2:26 - Slice Button Greyed Out
2:35 - Print with Calibration
3:11 - Filament Change
3:45 - Duplicating objects
4:24 - Seam/Support painting
6:06 - Text
6:42 - Temp Tower
7:08 - Retraction Test
8:27 - Calibration Objects
8:37 - Material Weight/Cost
9:23 - Webcam Monitoring
Пікірлер: 21
I just updated to 5.1 and I still only have one printing profile for my KE (standard 0.2) Am I missing something?
@LayerLabAustralia
6 күн бұрын
If you go and change any of the settings in that 0.2 profile, the little save icon on the top right of the profile selection will turn white, allowing you to save a new profile :)
Having problems getting model to slice..lan printing lights up..I don't use that..reg slice button won't light up..not sure what I'm doing wrong..
@LayerLabAustralia
18 күн бұрын
Man this program is so glitchy 😆 have you tried updating to the latest version or uninstalling/reinstalling?
@christopherismcaceas4868
13 күн бұрын
@@LayerLabAustralia I've contacted creality support because of the slicer issues because all the profiles that I created messed up somehow, the slicer speed was 300mm/s but printed at around 40mm/s and other issues... First thing they said that it is my fault. Next letter (different person i guess) told me that the app is in BETA so just wait for the update. And the third letter, they've sent me creality 5.1 before the update was released which was much worse than 5.0 was at the time :D I just wanted to share some issues so they would know, but they started defending themselves for some reason :D
@LayerLabAustralia
13 күн бұрын
@@christopherismcaceas4868 i'm also getting the speed issue, you want it to be one speed but it prints at another... way i found around that was to just start from scratch with a default filament profile and recreate it... now I can't adjust my speed AT ALL with the new update. lewl. We are in the boat together :P
@christopherismcaceas4868
13 күн бұрын
@@LayerLabAustralia If you can't see speed at all, enable advanced :)
@christopherismcaceas4868
13 күн бұрын
@@LayerLabAustralia So far on version 5.1 I only created 2 profiles for filament ant 2 for settings. If I do not touch the printer settings nothing resets anymore ;d
I'm tried to run all three versions of the new 5.0 software. All of them lock up when I load them. This slicer is DOA.
@LayerLabAustralia
9 күн бұрын
Yeah, each release seems to get buggier and buggier... I wish the ender 3 v3 ke was compatible with other slicers... 😢
genius, you are....
@LayerLabAustralia
7 сағат бұрын
Grateful, I am... :D
Creality print still does not know how to put a model flat on the print bed if you choose a flat surface as the bottom layer. Failed on both the model I tried , one being a flat round coaster holder and the other a trestle railway bridge with many straight flat struts - should be simple - every other slicer I tried was able to do that.
@LayerLabAustralia
20 күн бұрын
aw dang sorry to hear that.. Have you tried using the auto pick bottom button located directly on the build plate in the software?
@billwiththeb
18 күн бұрын
@@LayerLabAustralia no..
@LayerLabAustralia
18 күн бұрын
@@billwiththeb did it work? :D
@billwiththeb
17 күн бұрын
@LayerLabAustralia sorry not tried yet..been busy..power is currently out so no trying anything atm..
Dziwne jest to, że nie ma Ender 5, Ender 3. Ten program ma dużo błędów. Nie powinni go oficjalnie dawać do pracy. Jest irytujący. Czasami zamyka się samoczynnie, bez powodu.