Incredible device. A great technical achievement indeed. CONGRATS! gorgeous design and definitely great knowledge of object scanning. Amazingly just a bunch of viewers... What's the heck? This video is an academy-award contender in its special category!

I just have to say, if you are looking for a 3d scanner, you are doing yourself a disservice if you don't speak with Mark/EMS. We have experienced excellent customer service with everyone from Mark (the owner) to the application engineers and even the office manager. Regarding the HandyScan Black, we only have one complaint - that we didn't purchase these instead of the Faro arms back when we first started up. I used to view having to use targets as a negative aspect, but now that I have seen the light, I don't see much use in scanning with the Faro. Big props to Mark and his team. Go check them out!

@EMS3D

3 жыл бұрын

Thanks for the kind words. I'm glad to hear you are enjoying your HandySCAN Black.

For a 0.5mm scan that finish is incredible.

@EMS3D

Жыл бұрын

Thanks. Yes the Creaform system and software and very impressive. And to think you can go all the way down to .1mm as shown in this video. kzread.info/dash/bejne/ZKuj3LxwiM3epqw.html

Ok, once you get your polygonal model what software are you putting that into to get your NURBS patch? Also can this be turned into a solid model after filling the holes and regeneration of Radii etc. and which CAD software do you recommend with it.

@EMS3D

3 жыл бұрын

Hey Tim, there are many options as to which reverse engineering software you want to use to create surface and/or solid model geometry. Here is a video we made comparing four different reverse engineering software programs kzread.info/dash/bejne/opyDj9uamKrZhso.html

@timloney2251

3 жыл бұрын

@@EMS3D Thank you for the quick reply, I will check it out.

@timloney2251

3 жыл бұрын

I did watch the video, I greatly appreciate the effort you are putting into these videos, very informative! I will be going through the other videos as well.

@tstanley01

2 жыл бұрын

@@EMS3D Design X is top of the line, but it is expensive, and if you want to use the live transfer feature, you have to have a copy of the software you are wanting to transfer into installed on that computer as well. If you transfer into several different softwares (solidworks, inventor, etc.), it can get very expensive...

Is it possible to use for plastic injection molding steel?. As for this type of steel it is more shiny than the one you scanned in the video.

@EMS3D

3 жыл бұрын

Yes it should be able to 3D scan it.

Hi, very cool review! What type of dots are used with the Handyscan? thanks

@EMS3D

Жыл бұрын

6 mm retro-reflective with a 10 mm contrast. We also have our SpeedTarget Tape - learn more in this video kzread.info/dash/bejne/k5xlz9OEk5afo9I.html

What is the need to put the target dots over the object to scan?

@EMS3D

3 жыл бұрын

Hi Kapil, the targets are used for the scanners positioning. The video goes into great detail on how this works.

To learn more, schedule a virtual or on-site demonstration or have a service project quoted, fill out this quick form at bit.ly/371dkfH or contact us at 877-845-2700

Wish the scanner could track itself without tracking dots like modern VR headsets. Lighthouse + Vive tracker should do it.

@EMS3D

3 жыл бұрын

Hi Rupert, the only way to track itself with the accuracy it can achieve (25 microns /.0009") targets are required. We have 3D scanners that don't require any targets and use geometry but they are not as accurate.

I am looking to scan 3D objects to make them game asset ready, meaning low triangle amounts. Is there a retopology/cleanup function in the software where the scanned 3D model gets reduced or cleaned up in triangle size until several thousand triangles, but keeps its accurate shape?

@EMS3D

Жыл бұрын

Yes there is a decimate tool in VX Elements that allows you to reduce the triangle count.

Is there a scanner that goes inside an opaque cavity from the inside

@EMS3D

Жыл бұрын

Industrial CT Scanners may be able to do that.

@salimalalal5903

Жыл бұрын

The tomography scanner is banned from being sold in my country

@salimalalal5903

Жыл бұрын

@@EMS3D Dear sir, can you send me any file that I ask you for money and consider me a favor from your honorable person

This JOb is so good I want to build this cad model for your evaluation, Can you send me the STL data.

How much is that scanner?

@EMS3D

2 жыл бұрын

Hi Thomas, pricing varies by county, options, etc. If in the US feel free to contact us directly for pricing. Otherwise contact your local reseller.

@SmoggyTurnip

Жыл бұрын

$19900 to $29900. So difficult to say that isn't it?

@davidsharma3147

Жыл бұрын

@@SmoggyTurnip haha