Tomley on the udirc the slide button is speed restrictions 50% 75% 100% the push controls the lights

@TomleyRC

3 жыл бұрын

haha... that'll be why it was slower! Doh!.... Cheers dude

@bigbeardrc4145

3 жыл бұрын

@@TomleyRC no problem dude

@ulliinthehouse5852

Ай бұрын

@@bigbeardrc4145how do i turn it on its just blinking

@bigbeardrc4145

Ай бұрын

@@ulliinthehouse5852 is the battery charged and remote control turned on

I ordered one UDI 1601 1 month ago and per postal service I will receive it tomorrow. Can't wait to try this one. I have a 1/10 3RACING Sakura D3 CS and it's quite fun, but this one is smaller and has a gyro.

Thank you again for a great video,its always a good day waking up to a new video from you. It looks like an awesome little rc,I need to get one. I'm saving for either my first crawler or a no prep drag car but I keep seeing awesome cheap little cars and dip into what I have saved for the expensive cars so I can get the cheap car,oh well,its still an cool rc car,its not like the crawlers or drag cars are going anywhere, it will just take a little longer to get them. Thanks again for the great video,stay safe

the day just got better. thank you sir, for the smiles!

Lol, that was a great intro! Keep it up man, love your channel.

hahaha... That intro is hilarious!!

zero degrees makes metal britle also... years ago in 20 degree weather my 1973 shifter broke in my subaru... the rod inside was 1 inch thick and approx 16 inches long...

Pretty impressive little truck, dude!!! 😃 Fantastic bashing!!! Stay safe there with your family! 🖖😊

Haha-great intro! 😀

@TomleyRC

3 жыл бұрын

Cheers lol

Looks like a fun little truck. 😃👍🏻

LOL Yeah baby! You're stepping into my territory now. I have tons of RC + Action figure vids on my channel. Combination of stop motion, bashing, crawling, and some with a mix. Check it out if you have a few minutes for some laughs.

Nice vid Bro!! Nice tri rider!!

Excellent camera work! 💯

Lol 😅 that broke very easy but I enjoyed every second of this one thanks for sharing

Thought I'd pop in and Say Hi 👋 going to get one off these or the 1603. Great Rc's, Great unboxing and Test Run mate. 👍😎👍😁👍

@TomleyRC

3 жыл бұрын

Yo Tony.... hope you are well. Good to hear from you 😍👍

@TonysRcTechboom

3 жыл бұрын

@@TomleyRC its good to get back with you mate, dont know why you got lost in the system 🥺 have a great weekend 👍😎😁👍

It's true the color of the lights determine the speed mode!

Love the intro that was my teens when these movies were big

Wow Great best video💯💯🎊🎊

Showing off your dually I want that Ford looks so cool and in its own class

Thank you for this comprehensive test of what proved to be an impressive and interesting tricycle.

@TomleyRC

3 жыл бұрын

Yes...can't see a Reliant Robin being as forgiving lol

@Del350K4

3 жыл бұрын

@@TomleyRC Ha ha!

@philiplibby7536

3 жыл бұрын

😂

@Del350K4

3 жыл бұрын

@@philiplibby7536 It did do amazingly well as a trike, though, in all fairness. More stable than a Honda ATC...

@philiplibby7536

3 жыл бұрын

😂 very true

Shaggin wagon ya baby!!! Love it

@TomleyRC

3 жыл бұрын

Haha

Great vid keep up the good work i am a big fan

@TomleyRC

3 жыл бұрын

Thanks Ian

Love the intro

Wow..😱 its a beast

YesSiRr!! Very nice Mate!! LoL! Yes..it was an interesting intro! Haha! Definately Very kool drifting RC Machine...it even runs on 3wheels! LoL! CheeRz Mate!👊👍👌

The latest SG1603 has the 50/75/100 speed switch as well.. confused me when I got mine last week!

My son and I have one each and they are great - BUT one was really slow out of the box, and then stopped. It turned out that the differential and housing wasn’t properly installed and the ring gear was rubbing against the housing. As it heated up the plastics melted and then seized. I disassembled it, carefully separated the fused parts with a Stanley knife (not just useful for hijacking planes it turns out) and ‘presto’, all was fine. Has continued to work well. Great little cars. Question: The slicks - are there differences between the front and the rear? It looks to me as though two symmetrical (the height of the tire inside, and outside is the same) and the other two of them have a smaller diameter on the inside. I have only noticed this now after using the tires of fair bit and it may be where. Alternatively, I wondered if it’s to aid tyre contact on the outside tire under cornering. Any ideas?

Haha wasn't expecting to see that in the box yea babbyyyy yea

I was not that interested untill that wheel came off then this little truck became like a dangerous wounded wild animal!! Iol....Brilliant!

@TomleyRC

3 жыл бұрын

haha

I have bigrock got great now a screw has come out at the boll joint but new one will not go it like can you help

well that was a change from the usual videos of this truck bud 😀👍

3 wheels on my wagon......... nice one Phil.

Do like the look of that. I’m tempted

Ohh behave 😂😂😂👍🏽 made me laugh

really cool video 👍😊👍 sg 1601

Mate, god you killed me with the Austin Powers intro haha. #GroovyBaby

Nice edits. (:

I notice that it's 1/16. I have the traxxas e-revo 1/16 and that looks dramatically smaller. Is that the case?

That livery does look good. Jealous, still waiting on my SG 1604 to get here 😭

very cool

What's a good cheap option for brushless for my arrma typhon

6:10 Best bit... so good

Can anybody offer any advice? I’ve got one of these but after about 2-3 minutes the speed slows right down. If I switch it off and on again it’s back to full speed

Kinda thinking about ordering and trying to somehow fit that body to my 16889. Is it possible?

Intro had me in stitches 😂😂😂

@TomleyRC

3 жыл бұрын

Hahaha

good video , ty , could you not repair the car with some chemical metal / epoxy resin ?

In this model 4 channel change throttle power 50,75,100%,3rd channel switch light mode. Isn't?

The mini infraction jiji, 🤣🤣🤣💪💪

So where do we find hopups n stuffs ????

Lol i like how the camera is low to the ground to make it look faster.

Hey get the arrma granite voltage and compare it to those cars it’s 1/10 scale and it might be a good competitor not necessarily in the same range of RC cars but as in price

My next rc,love the PRICE on this baby.

Still want one.... most of my other cars only have 3 wheels anyway.

How long does it take for you to receive this package

Ha ha great intro!!!!

@TomleyRC

3 жыл бұрын

lol

I couldn't help but hit the like button instantly when I saw Austin Powers laugh my ass off

I ordered the wltoys 14401 was this a mistake? Im not planning on upgrading it and i hear bad things about it.

@TomleyRC

3 жыл бұрын

No, the 144 is a decent truck

Can anyone recommend some better drift wheels for this?

Yep,all the best cars lift the rear wheel, and Reliant Robins.

wow my little kid would love this. Watch it break on first outing. Or not.

Maybe the challenge should be how fast can you go on 3 wheels, lol. Easier to align the front end.

the way he opened the box

It’s a mini infraction!

How long does it charge for

All the tyre marks in the snow on the ramps were done by us! Me and my son had his Arrma Typhon on there. 😉 Snapped a bottom arm due to bad landing and cold.❄ ☹ Where would you suggest for parts??

@TomleyRC

3 жыл бұрын

Haha awesome. Arrma parts are like finding he lost treasure haha. I’d find the part no. and search it on Google.

@danlad77

3 жыл бұрын

@@TomleyRC Might see you on there one day. 😂 Will see if I can get some RPM arms. (Supposed to be a bit stronger)?? Great Videos👍🏻

I’m not sure to get This one or the rd.

Still waiting for my bloody 1603, Feb 25th now it says, but for £52 and 3 batteries I will wait 😊

@TomleyRC

3 жыл бұрын

Hopefully not long!

hi sir.... i really like your mods and videos... i actually bought this car using your link... i had issues with my stock servo and ended up ordering a brushless setup... i will be hoping for 30 mph on 2s...my question is how did you get the play out of the rear wheels??? both go in and out a huge amount imo... front is pretty average play for a cheap car.... anyway thanks for your help...cheers! PS...should i tear it down and grease diffs??? again i am not looking to go over 30-35 mph...

@TomleyRC

3 жыл бұрын

I’d give it a once over, the diffs are a little tight for my liking. As for the play, might need to look at some ‘shimming’

@roadstar499

3 жыл бұрын

@@TomleyRC yes, i did that with my 144001 front end...but this is way worse...and guess i need to take it all apart to see whats going on, just so much slop and free play imo...cars got like 30 mins run time on my drive trying to get it to stay trimmed...turns out the internals of the cheap servo have soo much slop also... thats why i decided to mount a metal one i had...that issue was fixed...i had high hopes for this one...but its just a toy grade compared to all my others... i got sucked in by the lights and gyro...lol ..but now radio is useless and so are those lights... anyway it is what it is i will try to get it figured out...thanks

Speed gain due to you exiting training mode via transmitter pal

@TomleyRC

3 жыл бұрын

Yes haha. Switched it from 50 to 100

Cool... are MTC or M-Class shells, wheels and shocks going to fit this?

@mikeupton5406

3 жыл бұрын

I have the CEN Fiat 595 body from that monster truck CEN put out not too long ago. The 595 is actually fairly scale and can be ordered in unpainted. I am waiting for the Hoonigan- ish version of this to show up. The wheel base length looks perfect. the width looks too narrow. As far as the M chassis bodies go, aren't they 200mm wheel base? The wheel base for these little cars is 170mm. Which is perfect for the 1/12th CEN body and I think the 1/12 Fiat 500 body. But I think these little drift cars are too narrow. For me if it dosen't work out going to try and find the K chassis which used to be sold by RCMART and ASIATEES.

Funny. Have you seen Monty Python's Bicycle repairman? The best jab at Americans. Off topic, But you British need to make a Austin Power's American basher movie.

A Bigget scale Rally Car On the next Vid Specially the FIESTA 💖💖

Wow stuck it good niiiicccceeee plastic * cold = bad day but like u always say at least your having fun wow like my kids for real hey is that 1603 challenge still going on haven’t seen anyone get to close to 100mph yet so yes I take it

Ya you english guys like your three wheelers, don't you? Hahaha xD

Just out of curiosity tomley .. do you think tamiya Type M size rim would fit this chassis with hex adapter

That thing runs great on 3 wheels 🤣

@TomleyRC

3 жыл бұрын

Yes, loads of fun haha

It's hard to ignore how good these are for the money. We have the SG1603 and it's that good, I ordered the same one you have so we have different colour schemes for racing eachother. Sadly the post from China isn't what it used to be 🤬

@bugsy742

3 жыл бұрын

It’s not the Chinese end that’s the problem mate, I’ve got 3 containers still being held our end 3 weeks after they arrived, thing is I watch the dockyard from my house the so called “quarantine” is literally that! - they are just holding them for weeks on end without even touching them then out they come with some bellend driving the truck on his own with a mask on! This is nothing more than economic bs going on under the guise of the plandemic- no one hate on me please, I’m just stating facts ✌🏼

@faiqcreates

2 жыл бұрын

Is the brushed motor holding up?

@davesrc_crawling8349

2 жыл бұрын

@@faiqcreates it's been surprisingly good and reliable. I did buy the brushless kit for it, but it actually ruined it so I converted back to brushed!

@faiqcreates

2 жыл бұрын

@@davesrc_crawling8349 how did it ruined it???

@davesrc_crawling8349

2 жыл бұрын

@@faiqcreates too fast and unstable, but also cogged at low speed.

😂😂😂🤣🤣🤣 YEAAA BABY YEAAAA!!!!!

disappointed it came unglued like that, cold temp didn't help. it kinda changed my mind about these units.. right when you're talking value, a non horrible hit sends parts flying! AWD with a gyro are cool features, brittle plastics... grrr! what could be cool.. put those electronics into your WPL D12 with drift wheels on it, just to see how it'll do.

I broke the same part on mine doing the same thing. 🙄 Are there parts available yet??

@TomleyRC

3 жыл бұрын

I've not seen them yet, but considering how popular these are... it won't be long!

That beginning was awesome baby Handles good on 3 wheels , i lost the pin out of my cv joint but my car just spun as my front diff is slack , i fixed my cv i used a cut 1.6mm drill bit , Great vid

@TomleyRC

3 жыл бұрын

haha... cheers for watching

1:32 Either the instructions have the model numbers mixed up or you do. Edit: In your title, I mean.

Can't it be fixed ?

Ha ha 3 wheel infraction clone 👊🏻👍🏻

@TomleyRC

3 жыл бұрын

Haha

6:30 it'll just buff out!

@TomleyRC

3 жыл бұрын

Haha

Nice PRICE

Bread & Butter RC Car for KZreadrs.. 😋🍞 All these cheap little RC cars keep the KZreadrs in business. Ha 🧀

@TomleyRC

3 жыл бұрын

Haha...

Austin powers got you the sub.

Looks good, but very small and looks like will break too easy

Very DiResta style up the the box being opened. I know cheap is a relative term but still, to me, cheap is less than one day's wage. Each time I've seen a video with cheap in the title, it's always felt the wrong side of "cheap".

@TomleyRC

3 жыл бұрын

£60..... that is Very Cheap for a Hobby grade RC ;)

Isn't that a copycat of the sg 1604?

you been watching kev? hes been doing a bit of a random video opening

@TomleyRC

3 жыл бұрын

Now n again if it's something that interests me. Gets a bit boring just opening a box normally lol

@DjGlenJon

3 жыл бұрын

@@TomleyRC yeah baby

Huh 1 view but 3 comment

Haha not first 😐

It's the same with mini z

2

look at that a fake of a fake of a fake if you didn't get it hoonitruck-infraction-sg______-UDI______

@masjuggalo

3 жыл бұрын

I'm sure it's the same as the SG models. May be worth dusting off a a959a for a comparision

First

This is a drift car not a stunt car.

I regret buying this one before I bought a Hyper Go 14301. This thing is complete garbage. After the fifth run only onroad driving, the diff locked up. Hyper Go forever!

@TomleyRC

Ай бұрын

Yes.. Hyper Go for sure... however, they weren't around in 2020 ;)