Great, thank you, just changed it seems to work pretty well now.

Nice video man thanks for your help!

Thanks for this!! My JKU is a 2013 and it just went out at 83k miles. Thanks for the clear and simple video. Happy Trails!!

@JeepLifePodcast

2 ай бұрын

Thanks, you too!

I just replace mine today. Thank you very much!

my 2014 start doing it stalling at 245km when it want thanks for the info time to change it 👍🏻🔥

Hey man just had to replace this today found ur video n had no problems thanks man

@JeepLifePodcast

Жыл бұрын

Glad it helped

After about a month of herking and jerking on the highway my Jeep finally threw codes same ones as yours. I originally thought it might be an 02 sensor because I pulled a code just once for one. So probably replace both just to be safe I gotta 2012 107k Awesome video! Definitely made me a subscriber glad I found you!

@JeepLifePodcast

2 жыл бұрын

Glad to hear that you were able to fix it.

Thank you very much. You make it so easy

@JeepLifePodcast

2 жыл бұрын

You are welcome! Make sure to like and Subscribe to stay up to date with all our latest content.

Thanks for the video, I just replaced this on my 2012 JKU, had some intermittent stalling issues at very low speeds; a Jeep Wrangler Forum also said to replace the positioning sensor...so far so good.

@PrinceJes

8 ай бұрын

Was that the problem?

Gonna change mine now . Thanks for video 📹

@JeepLifePodcast

2 жыл бұрын

Glad it helped

Thanks man. This happened to me this morning. Once I had the part I was back on the road in less than 10 minutes.

@JeepLifePodcast

2 ай бұрын

Glad it helped

Just replaced my CPS on my 2013 Wrangler Sahara. Last Friday morning it stalled out on me at a bad spot, but started up again after sitting for 5 minutes in the middle of a highway. Ran great all weekend plus Monday, but then conked out at the same spot on Tuesday morning. Hopefully this sorts out the issue. This video was instrumental in making this an easy job, even at 10pm in the dark. :D

@JeepLifePodcast

2 жыл бұрын

Thank you so much for the great feedback. Hope you enjoyed the video and make sure to hit that like and subscribe button to stay up to date with all of our latest content.

Did you also have a p0300 code too? Mine just came on today and had both P0339/p0300 I replaced the sensor and reset the codes so far so good

Great video. Our 2012 lost power and was throwing up codes like gang signs

@JeepLifePodcast

2 ай бұрын

Oh no!

My 2014 Wrangler JKU Rubicon just threw this code when I started it up last week.... P0335. I only have 58k miles on mine.

So, did you have to lift the lock tab on the connector or squeeze it? This is a great video! Thanks for getting in there with the camera.

I appreciated the video. I'm trying to do the same thing on my 2018 1.4 liter jeep renegade latitude. Any suggestions on where it would be? Thanks!

Thank you

@JeepLifePodcast

Жыл бұрын

You're welcome!!! glad we could help. Make sure to like and Subscribe!!!!

Jeep Liberty 2004 and mine is welded in apparently with rust? Won't come out for anything. The screw unscrews but can do nothing from there :(

Thanks bud.

@JeepLifePodcast

Жыл бұрын

You bet

Thank for showing where it was located. Mine shut off either at a red light or slow driving

@JeepLifePodcast

Жыл бұрын

Glad we could help

@thebrucechannel8061

11 ай бұрын

I just replaced my camshaft position sensor bank one after getting the dreaded lights and the engine going into limp mode, now going to replace the crankshaft position sensor with an OEM Mopar part, then reprogram things with my Jscan app. My engine was also cutting out at very low speeds, hope this works.

@courtneystout8190

10 ай бұрын

​@thebrucechannel8061 did it work? My 16 jku does same thing. It's also RHD because I deliver mail... it's so annoyingly frustrating. it was doing the limp mode before the code for Crankshaft sensor came on my snapon scanner. Camshaft sensors have been replaced dozens of times. The wires have been done and I can't figure it out. Odd thing is I bought a second 2016 RHD as a back up and does the same thing 😅🤯

@therealrealshocker

8 ай бұрын

@@thebrucechannel8061jscan??? What’s that?

@therealrealshocker

8 ай бұрын

@@courtneystout8190I saw someone with these issues and the guy claims it was his ECU. He opened it up and notice the pins were barely soldered so all he did was add solder to them and fixed his stalling issues.

My 2014 JKU had the idle just drop to zero while driving on the highway. Still had power but nothing even when downshifting (6 speed manual). I was able to just turn it off and back on and had normal idle again. I’ve had CEL on for wheel sensor and crankshaft position (PO018) that comes on randomly. I’ll see how it drives tonight when I get out of work. Hoping the fix suggested in this video might solve it if it happens again.

I'm fixing to change mine. It has misfiring at around 3500 rpms ar wide open throttle and I can herea it on deceleration. It's really quite random. I already change my spark plugs and that didn't help. Hopefully this is it. If not I'll move on to injectors or coils.

Hi When climbing hills, the RBM level decreases by itself.I'm having a problem with my Jeep Wrangler.

Wondering if that would be the cause of a P0340 or the p0018 that just happened

I know this fix at least two to three years old but is there two of these camshaft sensors on JK/JKU 3.6L ?

Did you jeep ever go into limp mode? My 09 jk rubicon goes into limp mode every other start unless I wait 10 minutes

If I changed this sensor will it increase my gas mileage . Also I never got a code for this anyway I just read that this could be a reason to having low gas mileage . Just curious for your opinion or anyone else

I got about 169K on my 2013, i’ve never replaced this, but when I’m accelerating, sometimes I feel a little bit of a power drain, but then it kicks back up the further i press the pedal, not all the time though. could this be causing my problem as well?

Is there a way to test which sensor needs replacing? I ordered the part only to find out that there are 2. I don't live in the US and the auto parts stores where I am do not keep them in stock.

@JeepLifePodcast

Жыл бұрын

Through a Vehicle diagnostic reader/code reader you would be able to see which sensor needs to be replaced.

So I have a question I have a 2015 Jeep Wrangler is going to let mood in the camshaft position sensor keep coming on

@JeepLifePodcast

2 жыл бұрын

So one of our Co-Hosts had this and actually go get it checked out at a dealer because this can mean your timing is off in the motor and could be causing harm to the motor.

I'm having the same issue...sort of. I have a 2017 JKU. I've lost power a few times, but the Jeep doesn't stall and fires right back up. The last time that it happened, I was rolling along at 60mph and just shifted to neutral, turned the key and just kept going. Am I having the same issue? I should also mention that the check engine light has not come on.

@joselizaola5079

8 ай бұрын

Did the cps fix your issue? Mines doing the same thing

Did you have to relearn it, sync it with the cam sensor?

@JeepLifePodcast

2 жыл бұрын

No, you should not need to sync or relearn the sensor.

P0369 Camshaft Position Sensor Intermittent - Bank 1 Sensor 2

@JeepLifePodcast

Жыл бұрын

Thank you

Hi Frank, thanks for the video, I'm about to change my sensor as well. Question please, how do you get the connector off the sensor? I've watched a couple of other videos as well, and everyone say "just pop it off", but my connector is on pretty tight, I can't just pop it off by hand. Any thoughts? Thank you!

@JeepLifePodcast

2 жыл бұрын

Make sure that the Locking feature on the connector is open.

@garovetsas4125

Жыл бұрын

It should be a red tab push the red tab up. It’ll pop up about a eighth of an inch do not take the red tab all the way out just unplug sensor

@jeffwrona4751

11 ай бұрын

Ya, my clip broke while trying to get it out. I am replacing the sensor and will zip tie it to make sure it stays in place. @@garovetsas4125

@davidkeeton6716

2 ай бұрын

​@@garovetsas4125 THANK YOU! That is the detail we needed, seriously. I didn't know if it needed to be squeezed or lifted or what. There are so many different kinds of latches on weatherpack connections.

Should you disconnect the battery first?

@JeepLifePodcast

2 ай бұрын

yes, you should, it will give the vehicle a complete reset.

Did it fix the issue?

@JeepLifePodcast

3 жыл бұрын

Sadly, that was not the only issue our Driveway Mechanic Frank had. He just replaced his motor this past week. You can check out the video here: kzread.info/dash/bejne/p596x9hmYbqWpco.html . If you haven't already make sure to hit that like and subscribe button.

Do you have a part number?

@JeepLifePodcast

3 жыл бұрын

www.quadratec.com/products/51000_1008.htm , This is an aftermarket version or the Mopar part number is 5149141AF Thanks for watching!! Make sure to hit that like and subscribe button to stay up to date with all our latest videos

i have a 2014 jk it only has 66 thousand k's on it (not miles) but now it will drive and run without missing a beat for about an hour or so but then the motor will shut down and will kind of start but not fully. and some times it will start fully and can smell fuel badly but it will cut out after like 5secs but it i leave it for around 30mins it'll start and run like nothing was wrong with it

@samcurl

Жыл бұрын

Did you ever figure out what the problem was? 2014 jk doing the same thing

@oxmate

Жыл бұрын

@@samcurl yes loose wire on the inlet manifold

@JeepLifePodcast

Жыл бұрын

yeah this is the simple fix for the problem that could be very extensive.

@therealrealshocker

8 ай бұрын

Mine is doing the same thing 😮

@therealrealshocker

8 ай бұрын

@@oxmateon the intake? Which wire? How did you fix it???????

Did this fix your Jeep

I have never had luck with aftermarket electronic sensors on any of my mopars ----- in my opinion never buy anything but dealership electronics for your jeep or mopar vehicle unless you want to replace that part again faster then you should need to replace it

@JeepLifePodcast

2 жыл бұрын

I would completely agree with you.

@anaslp525

6 ай бұрын

When climbing hills, the RBM level decreases by itself.I'm having a problem with my Jeep Wrangler.😢

You’re using that jeep I see mud

@JeepLifePodcast

2 ай бұрын

heck yeah, we always use our Jeeps for what they are meant for!!!!

What happen to Frank?

@JeepLifePodcast

Жыл бұрын

Frank departed from the podcast about a year ago.

What year is this car

Great video. Our 2012 lost power and was throwing up codes like gang signs

@JeepLifePodcast

2 ай бұрын

Sorry to hear that, thank you