I was surface modelling these 30 years ago when I worked in the forging industry.

Great sir..u earned a new subscriber due to your advancing in solidworks for we students..plz keep going till way advance level..I really appreciate ur work

@Dragon-Slay3r

Жыл бұрын

No problem

Man, this reminds me of high school and Pro/DESKTOP and Pro/ENGINEER courses we had back then.

Thanks! wonderful SOLIDWORKS instructing videos!

What's your computer specifications sir ! 🔥🔥❤️

I learned how to use LOFT in Catia but I didn't know how to give guide line to them. thanks to you, now I got it.

Thanks sir , ur explaining very clearly

I’m on the final part of the drawing, where you’re adding a cosmetic thread. I click the ANSI Metric but then for the Type option I don’t have Machine Thread. The only option I have is Straight Pipe Tapped Three something. Do I need to install an addin to get more options for cosmetic thread? Or do I already have the addin and just don’t know the name for it to get more options for cosmetic thread?

Thank you for the tutorial

Very clear video

Excellent !

Thank u very much....very helpful

Nice video about the loft feature. I would recommend to add a DIN 76 Type A groove to the thread to make production easier.

Great sir...

Thanks អគុណ

you are the best

So awesome 🙏🙏🙏

Nice sir. Sir, please aap difficult 3d models ko vernier ki ya fir angle gauge ki help se kaise measure karte hain us,par bhi video provide kijiye.

thank you boss

great job man , tnx

Hello, what graphics card and processor do you use in the video?

Nice

Thanks

please try to provide detailed drawing of parts as well

Would it be possible to get the drawing from somewhere other than facebook?

Thanx

good

This thumbnail triggered me, I remember doing the calculations by hand to calculate stress and failure for this hook.

Sir can you please upload tutorial of brake caliper right side? I'll be waiting for it

👍👍👍

Sir, why does it show 'Loft operation failed to complete'? Even though I have given all the constraints.

❤️❤️❤️

Muito bom poderia me mandar o desenho ?

Sir please teach plastic mold tool design and plastic trim tool design in solidworks

Sir can u explain how to draw vortex tube

👍好

Sir one video upload for flow simulation pls.

❤️

Brother please please make video on how to add realview graphics in solidworks .... Please

I try it in moi3d now

👍

22:22 the only problem I see is that the feature created at the timestamp is not tangential to the feature created before. How would we make the surface tangential so there isn't a hard line in the surface?

@Rizashi

2 жыл бұрын

Sketch 10 should simply have gotten a tangent constraint. No idea why he omitted that. If it would have been impossible for some reason, one simple way of solving it would be to delete face after the dome and then replace it with a new loft between the tip and base shape.

@What_Other_Hobbies

2 жыл бұрын

The drawing provided in the beginning of the video is missing dimension and relationship, and some ambiguities. End of R94 arc should not be vertical to center of D70 circle, but tangent to R82 arc. R125 arc to the left of D36 circle should not start from D70 circle, but tangent to D70 circle, meaning the other R125 arc is does not start 71 away from center of D70 circle. D36 and D70 circles should not be tangent. Then the tip R10 arc can be tangent to both R125 arcs. I connect and 2 ends of R10 arc at the tip, and draw perpenticular to the center of that line so I can get a slightly smaller than 1/4 of a circle, revolve the tip, the loft 4 sections and the flat face of this revolt with tangent, I can get a hook with everything tangent to each other.

How do you have such a high quality render on the material surface? No matter what material I choose it just looks soft and cartoonish (and the view setting is not in cartoon mode, I checked), how can I see the roughness?

@TBBTguo

2 жыл бұрын

View > Display > RealView Graphics.

@rajeshbhise7958

2 жыл бұрын

Basically It depends on which graphic card you are using. A top end graphic card will give you high quality.

In catia it was easy though

It's possible drawin in autocad

Hello sir there is an showing error after loft boss I.e. the circle at edge (after G- G section)are not intersect , I' tried too much but it can't be done I'm also coincide relations still it is not done plz help me sir

I want to install solidworks in my pc,can somebody help me by a link please?

ur voice of anumpam

Can someone explain me why he separate the sketch while we can combine sketch 2 3 4 into one sketch?

How can I do download filé 2d

Hello there, i hope doing well in this pandemic. My question is which is best laptop for CAD softwares and rendering ? My budget is nearing 1lakh. Please help to find better one 🙏

@sukhwindersingh-yq9cy

2 жыл бұрын

You can choose between lenovo legion series , hp omen and lenovo thinkpads , make sure you get minimum 4 gb of latest graphics card i7 or ryzen 7 etc. You have lots of option to choose near 1 lakh , all the best👍

@sagarprajapati702

2 жыл бұрын

@@sukhwindersingh-yq9cy Thank you soo much for your opinion. Is 4 core is enough or i look for 6 & 8 core processor ?

@sukhwindersingh-yq9cy

2 жыл бұрын

@@sagarprajapati702 honestly I don't know much in details bro but I think in range which you finding laptop , you can get "the best" laptop , for such things cores etc you can look at the chanel that I've shared , I'm using ho elitebook g2 its i5 5th gen , 1 gb graphic card it works fine in it

@sagarprajapati702

2 жыл бұрын

@@sukhwindersingh-yq9cy okay good 👍 Can you share that channel link here ? And thanks for your time 🥰

@dmyt58

2 жыл бұрын

@@sagarprajapati702 more cores isnt always better. Solidworks doesnt have the best multi core processing so a better cpu with less cores will probably serve you better.

Make in autocad

Software name..?

ok

hi.. sir my one daut is solidwork in rendering add like pc add kese kare please

@sukhwindersingh-yq9cy

2 жыл бұрын

You can do in solidworks visualize , you get the app when you download solidworks

@kapilmalviya71

2 жыл бұрын

Sir is topic par video banaiye na

Sir please upload. Pdf file

luk

i think that you got it all wrong man, i calculated it to be more specific, it need to be pointy....

@dmyt58

2 жыл бұрын

You can just draw a line in the sketch and revolve it arround its centerline if you want a point.

Падж??? Ты ли это

Why have I come here ?

too much weird language..i could not understant technical terms in explanitons

Crane hook with screw in? do not show people this. They may actually end up designing such a horribly bad product