Love your videos ! Keep up the great work

Thanks Mr Guzman :) great video! From Florida - 11's and 12's are ridiculous with all the small parts that can be damaged..

Great video very professional

This video was VERY helpful and spot on with what I found when I did this repair. I used the Blue Forward machine and was *relatively* easy. I’ll take the advice next time and order the $3 row of magnets for MagSafe so I don’t have to fuss about putting them back in. Thanks for the superb vid as it was very helpful

@MrPhoneDoctor

2 жыл бұрын

Awesome glad it helps

This channel great. Good content creator

Did you check the polarities of the magnets when putting them back in?

Do you know if the internals of the iPhone 13 Pro are similar to this?

I am not going to lie but whenever he says "laser" I instantly get reminded of Austin Powers lol

Good 👍👍👍 master Number one 👍👍👍

@MrPhoneDoctor

2 жыл бұрын

🙏🏽

Very nice😘

Good job I think Blue laser machine is More good

Does S21 motherboard working with s21 plus and ultra lcd? S20 series working with each other. How about S21?

Hello Javi great video! Would you recommend the little saw cutter you use on the camera part or can I just purchase one of those pens that break the glass?

@MrPhoneDoctor

2 жыл бұрын

Go with the pen

@geraldfischer1057

Жыл бұрын

I use an 8 oz hammer and Scratch awl. Just make sure to start on the left side of the camera. I'd like to find that break pen. I use the scratch awl and some force to chisel out the glass. Still took me 2 hours to complete the job.

Is that Xacto Knife #5 and #17 blade?

Where do i buy the backglass from

Do you have oem glass .. or where can I purchase ?

MagSafe isn’t quick charge it’s slow charge

Why’s the voice quite and the music so loud! Informative video with subtitles

Please Where can I get the tools?

I was thinking of attempting this repair on my own phone and then i watched this video xD

@dnareti

Жыл бұрын

You should've done it. I did it and it wasn't hard.

@Adribo0

10 ай бұрын

@@dnareti help me 😭

@dnareti

10 ай бұрын

@@Adribo0 I'll do it for you if you live nearby. Where do you stay

@Adribo0

10 ай бұрын

@@dnareti naples fl?

@dnareti

10 ай бұрын

@@Adribo0 oh I'm in California.

Does the phone remain water resistant after this glass replacement..????please tell..!!!!???

Hey The Phone Doctor, we use this same machine in my office for back glass removal, every time we work on the 12 series from 12 to 12promax, we get issues with the cameras even after covering them, they get blurry the loss focus and dust gets into them and we have to result in changing the cameras, any solution to this?

@MrPhoneDoctor

2 жыл бұрын

I've seen this happen only on 12pm. If you notice the lower camera when glass removed has a hole. Dust gets in there damaging the camera. Camera needs to come out on 12pm

@AhmedLeopard

2 жыл бұрын

Cleaning or changing only glass lend didn’t fixed it ?

Hi, I’m not sure if I’m gonna reply, but my phone is having speaker and mic issues during calling, the Apple has provided the resolution of back panel change, do you think going for that is safe and a good option?

@MrPhoneDoctor

2 жыл бұрын

What model? Any damage to it? Back panel change won't do much imo

@currynkimchi8617

2 жыл бұрын

@@MrPhoneDoctor It’s 12 pro max, there is no physical damage to the phone, they just said they will change all the rear part excluding my screen, which is a little funny as the full replacement of the phone still makes sense but they said it’s not possible but everything else will be replaced except the screen and front camera

Hi can you tell me what the tape is called you are using over the camera lens please ?

@nateklug5933

2 жыл бұрын

Masking tape another name for it is painters tape

What was the laser for? What function did it perform in the removal of glass.

@LittleShmuplet

Жыл бұрын

It melts the exceptionally strong adhesive holding on the backglass

@dnareti

Жыл бұрын

I've done it without the Lazer. It wasn't hard at all. Just need the tool to remove the glass

Hi there, I'm a repair shop in Canada, just repaired a rear glass on an iphone 12 pro. Used the same laser machine, now my rear cameras and flashlight don't work. Any idea, can I replace the cameras, are they interchancable? Thanks

@MrPhoneDoctor

2 жыл бұрын

You need to take phone apart and remove camera before replacing back glass. There is small hole on bottom camera that allows dist to get in causing damage

@richmurphy5647

2 жыл бұрын

@@MrPhoneDoctor Thanks for the reply can I replace the cameras, is that where the damage is

Hi bro ive heard there are side effects for using laser to repair back glass like issues with flash etc

@wolfynubie

2 жыл бұрын

Is it true?

What are your prices on this and a camera repair?

@uhhTabby

2 жыл бұрын

$600-700

Sir which is best laser machine Forward blue M TRIANGLE NASAN TBK

@juancruzpineiro9740

2 жыл бұрын

I own a TBK and don’t recommend it. The machine is good and works but the “blueprints” files for back glass are very badly made and don’t align at all. I had to manually correct them piece by piece so nothing is damaged which took a very long time.

@PaulSazhin

2 жыл бұрын

@@juancruzpineiro9740, you can use Sunshine software, templates are much better. Besides, you can edit template once and save it - in next time you don’t need to correct it.

@MrPhoneDoctor

2 жыл бұрын

Any fibre laser will be good. Nasan made new molds that you don't need templates drop phone in and it cuts glass video coming soon

What kind of adhesive do you use

@MrPhoneDoctor

2 жыл бұрын

Cold press glue

How much does this usually cost ?

Do you ever need to remove the front screen to prevent it from being damaged from the high heat?

@MrPhoneDoctor

Жыл бұрын

Not with these lasers

@Quijano1516

Жыл бұрын

@@MrPhoneDoctor are use a soldering heat gun and I wasn’t sure whether or not to remove the screen first in case I damage any internal parts

@MrPhoneDoctor

Жыл бұрын

@@Quijano1516 laser

I don’t have a laser. What else could I do for DIY

@MrPhoneDoctor

3 күн бұрын

Hot air gun very carefully

Where do you get that thin pry tool with the red handle on it ?

@MrPhoneDoctor

2 жыл бұрын

It's an exacto blade

Where could I purchase the phone clamp

@MrPhoneDoctor

Жыл бұрын

Mobile sentrix should have it

No one has a video that outlines the removal of the bezel for replacing small holed backglass. I’d love that tutorial, no cheating with large hole backglass…

@MrPhoneDoctor

2 жыл бұрын

Bezel near impossible to come out. Will have to replace entire back housing.

@PaulIshak

2 жыл бұрын

@@MrPhoneDoctor I know it has to do with the desoldering of the bezel. Not up for the challenge?

Sir tell me

Mr Phone Doctor .. why didn't You use Forward Laser Machine ... its more easy and convenient after laser with forward. i have experienced all machines. til xmax standard laser machines are okay and but from 11 to onward blue laser is best

@MrPhoneDoctor

2 жыл бұрын

Everyone has there own preference

@atifintel

2 жыл бұрын

@@MrPhoneDoctor we do bulk work. i have 3 machines. old heavy duty 80 wat manual laser machine . m triangle , blue laser . the removing process and cleaning is 100 times easy with blue laser then other 2 machines on xr ,11 ,12 models. only backdrop is smell on laser time . but total work time from laser to fix . blue laser wins. trust me we do 10-20 random models a day.

@atifintel

2 жыл бұрын

@Jose Vigo its about every technician,s preference as mr phone doctor said .. its depends on how much work load you have if you have maximem 5-10 phones a day means retail business i will prefer you to get blue laser machine.if you know how to remove without laser too then i recommend standard laser machine ..

@kevindesiena3544

2 жыл бұрын

@@atifintel Have you ever had a problem with dust or glass getting into the small holes located at the base of the bottom rear camera? I never had the problem up until my last two 12PM. Had customers state that the camera won’t focus correctly after or it’s blurry

@atifintel

2 жыл бұрын

@@kevindesiena3544 Yes Dear with Mopa Laser Machines like M-Triangel/TBK/Sunshine/Refox/Nasan due to laser makes that bonding Glue into powder dust that goes to into cameras via that holes. Reasons : 1- Not Using Powerful vacuum . 2- not Using Protection to cap the camera lens 3- Doing Laser more then 1-2 Times . M-Triangel/TBK/Sunshine/Refox ( these are 6 WATT MAchines so need to make laser more then 2-3 to done perfect work . Am using right now Blue Laser and Nassan LS-1 Both are out Standing ... Nasan LS-1 is the most fastest and power full machine

Javi, they seem like they are a pain in the A to do.

By the looks of it u dont do this often.

@MrPhoneDoctor

Жыл бұрын

Do them every day

which Laser machine do you prefer blue forward or the one in these video ?

@ifixurphonecorp8854

2 жыл бұрын

@Jose Vigo Not sure wanted to know which one to buy best,

Music blaring voice quite as hell lol

Of course apple would design the phone so you can’t easily fix them. Makes my blood boil

bell end

Words are unnecessary. You are a crack!!

@MrPhoneDoctor

2 жыл бұрын

Just a tad!🤙🏽

I thnk this channel is down already, no new content, no new videos, and the proccess to replace glasses are always the same

@MrPhoneDoctor

2 жыл бұрын

And you still watch... 🍿🍿🍿

Why even make a video like this??? Who has a laser at the house 😂😂😂 Waste of time

@MrPhoneDoctor

Жыл бұрын

There is plenty of people who have lasers in their shops. If you don't own a laser take it to a professional 😉

How much does this usually cost?

@MrPhoneDoctor

3 ай бұрын

Depends on the series usually between $80- $130