Thank you for the file as well as this video Nice job

Thanks for showing this. I had a machinist friend try to sharpen one for me by hand and it came out worse than yours. I don't have a mill but do have a small atlas lathe and I think you have shown me what I need to make so I can salvage the old counter sink. I didn't think about the cam action when I first thought of putting it in my lathe chuck. Now I will make something similar to what you have done.

@LetsRogerThat

4 ай бұрын

Glad to help good Sir. Gilles

My idea is to get a used DA100 collet 'extension' which is 1"OD. DA100 collets go up to 9/16 which covers 1/2" (most counter sink sizes don't exceed 1/2 inch shank). They are around used for $30, saves work and adds flexibility.

Thanks for the video keep on keeping on.

@LetsRogerThat

Жыл бұрын

Thanks Harold :)

Great job! I would love the STL file for the cam as well.

@LetsRogerThat

Жыл бұрын

Stuart I put the link to download the CAD and STL file in the description. ;)

@StuartdeHaro

Жыл бұрын

@@LetsRogerThat Awesome thanks!

Nice. That sure looks lika a fun build.

nicely done! I don't have 3d printer, wish I knew how to machine the cam. Thanks for sharing

@LetsRogerThat

Жыл бұрын

If I figure out how to machine it I’ll post a video for you. Gilles

@chip-load

Жыл бұрын

Its not a cam in the traditional sense. Just cut one side at an angle. Trig will give you the exact angle or the displacement you want . It varies with the diameter of your part. Rotate the angled side against a stop and, voila, you have the translation!

Nice work

@LetsRogerThat

Жыл бұрын

Thanks Bill

Would love that STL file of you wanna share it. Build looks awesome!

@LetsRogerThat

Жыл бұрын

Thank you it was fun to make. I added the link to my Google Drive in the video description for everyone to get the STL file. Gilles

@honeycuttracing

Жыл бұрын

​@@LetsRogerThat I'm not seeing that place to get the file

@LetsRogerThat

Жыл бұрын

@@honeycuttracing I added a link to my Google Drive in the video description for you. There you can find the STL and CAD files. Gilles

Do you need to dress the side of the wheel to get a flat face on the countersink?

@LetsRogerThat

Жыл бұрын

You could but I don’t feel the need as my countersinking requirements (so far) have not needed any precision

Nice job! I've been mulling over in the back of mind about some sort of similar adaptor for my dbit grinder. If you have the cad file would you mind sending it to me?

@LetsRogerThat

Жыл бұрын

I’ll do it first thing tomorrow good Sir

@MicksWorkshop

Жыл бұрын

@@LetsRogerThat Thank you!

@honeycuttracing

Жыл бұрын

​@Lets Roger That would like the cad as well awesome build