Military aircraft mechanic here: these little “differences” Cody is talking about are game changers. It can mean a quick painless job vs. using the wrong tool, taking time, and potentially damaging the part.

@cepaasch

10 ай бұрын

That goes for all aircraft. Most of the time we use 1/4" for almost everything. Granted some of the larger parts have much larger fasteners and require larger drive(1 1/2" drive).

My dad did industrial maintenance for over 30 years, I've been going through his tools since he passed. Finding a wide range of brands, but it's easy to tell which ones are quality like snap on, Mac, proto, and S-K. they just feel different in the hand.

Here is a more affordable option from Gearwrench amzn.to/38XP03c Snap-On Ratchet PN TKF72 Spinner -On PN TMS70A (amazon affiliate link above)

@COMEQUICK7

2 жыл бұрын

Thank you so much

@ChickenLips412

2 жыл бұрын

Recommend pinning this comment to the top.

As a flat rate GM mechanic for 6 years out of college it’s sink or swim. I took a job at the local steel mill due to politics, service writers picking favorites and that. I don’t regret it though. Snap on tools are the best, they put food in my family’s table and did help me be a more efficient technician. I still have snap on tools I just choose to store all my snap on tools in my big harbor freight tool box.

@nickjackson4683

2 жыл бұрын

As far as boxes go, i dont understand why people feel the need to go with snap on. I have experience with both Us general and snap on and they are of VERY similar quality, yet a large disparity in price. Only reason I would even consider a snap on box would be if I couldnt live without the USA made stuff.

As a professional aircraft mechanic I will sign on the bottom line all that you said here. My 1/4 inch Snap-on set was what I had to keep my eye on when my coworkers needed to borrow something One valuable feature of Snap-on sockets that I don't think you mentioned, is their thin walls. There are situations that no other brand will fit, and my Snap-on sockets saved the day. I measured with a caliper, and the Snap-on sockets were thinner than any other brand. Just on that advantage alone, they were worth the price, as you mentioned, especially at flat rate shops. Sure, you could take another brand and grind it down. Then when it cracks, you're without a tool, And now you have to spend some money. You would have saved time and money if you had bought Snap-on in the first place.

@SVMSICE

2 жыл бұрын

Interesting little known feature I imagine.

@desertdog2282

2 жыл бұрын

As an A&P myself I know what you mean. But even some of my Snap On tools needed a little grinding in order to get to that last Hi Lok nut jambed way in the corner. Sometimes you got to do what ya gotta to to get the job done.

@chriskelly3678

2 жыл бұрын

@@desertdog2282 lol... been there... hard to grind on a tool before you get its replacement... Also you know a good Aerospace set when the sockets and many wrenches are blackened. Even snapon chrome is the enemy. Props to the inventor of the wire twisters! Still my favorite hand tool.

To tell the truth, I really got the when you pulled out the complete wobble extension set. I did chuckle when you said that the 1/4 drive was primarily used for 7mm-10mm and with the 3/8" and 1/2" you started naming off SAE sized fasteners. I think the metric titanium pins are having more dire consequences! :D I do really like that ratchet and knurled adapter. One thing that's great about the snap-on sockets is the hash marks around the top of the sockets allow you to easily identify metric from SAE, but I did not know about the broach on the deep sockets. I've had my Craftsman deep sockets for a very long time, and have suffered the same fate of fasteners dropping into them. Those are going on my shopping list!

@thomascarroll1916

2 жыл бұрын

Metric system is assimilating Cody.

I’ve got a 3/8 drive Gearwrench version of that little stubby ratchet and I’m amazed at how much I use it.

@wranglerstar

2 жыл бұрын

Can you put a link up for those who would like a more affordable option?

@timdoolan1828

2 жыл бұрын

Wranglerstar, get a gearwrench ratchet thats extra long with the flex head it would fit in well with you snapon tools

I have never regretted buying a quality tool over a cheap knock off.

@beerscout9408

2 жыл бұрын

But you can still buy quality for 1/2 the cost of snap-on. Wright tools, for instance. High quality, made in the USA.

@nokiot9

2 жыл бұрын

I have. You gotta be 100% sure it’s something you’ll use often or need or that the purpose you bought it for would be constant. I can always find an alternative use but I feel like I’m bastardizing it 🤷‍♂️😂

@leonardbakers

2 жыл бұрын

Nice tool collection to sell at half price when you die. 💀🛠️💀💸

@josephg.3370

2 жыл бұрын

Same here

@mattfranks5501

2 жыл бұрын

Snap on is the best quality you can get in the standard mechanical hand tools there is better on power tools and other specific tools but for the basic set there hands down the best

Been a professional technician for over 30 years and one of snap ons logos is snap on there is a difference if you use these tools every day like I use these tools every day you cannot replace the quality of a snap-on tool yeah there is cheaper ones And they will work but when you depend on tools to make your living for your family you want to buy the best and nothing else can replace it

1/4” is invaluable. I have old Made in USA Craftsmen ratchets that I got from my dad. He used them as an aircraft mechanic before he became a teacher. God bless.

@SVMSICE

2 жыл бұрын

I really like to just have the 3/8 to 1/4 adapter however on rare occasions the space is too tight for that.

@TylerSnyder305

2 жыл бұрын

1/4dr is my favorite, and I collect 1/4" ratchets. My main Wright tool contour grip set is in a Snapon party box ( cool box, look it up ), and I set it up with basically everything I tend to need when working on things in the 1/4" territory. Standard ratchet , flex head ratchet, a bit ratchet, a flex handle, a spinner handle, a mini speeder I made, sockets standard & deep SAE & Metric, SAE & metric hex keys, ignition wrenches Sae and metric, small pliers, a few small drivers, a pick , and some other things. Basically a small toolbox dedicated exclusively to 1/4" drive that's more Involved than anybody would normally go but I'm crazy about 1/4".

@TylerSnyder305

2 жыл бұрын

@@SVMSICE That's one thing I've just always hated for some reason. It seems like it used to be very common in homeowner grade sets back in the day, and I never understood it. Why not make those smaller sockets a 3/8dr or include a 1/4dr ratchet to use them. I understand the economy of it, but theres a lot I dislike.

@SVMSICE

2 жыл бұрын

@@TylerSnyder305 I have 2 larger sets and one smaller set. None came with a 1/4 driver the big ones had an adapter and the smaller set which is my go to set goes down to 8 mm, and I can’t remember the smallest SAE, with 3/8 drive so that’s pretty cool. I have a couple old 1/4 drivers, one Craftsman but they don’t have any extensions, that’s what I’m missing. I used to have a six inch extension but I haven’t been able to find it for a couple years so I must have lost it somewhere along the way. Luckily so far fingers crossed the adapter with 3/8 extensions has always worked out for me. I mainly work in my own cars which is what 99% of my kits are used for. I see the need for small engines though, I just don’t work on those much. Oh and all my sets are over 20 years old. I have a Bench Top I believe is the name, that I got from Kmart. Lifetime warranty so they claim lol. I really like that set. A Performance Tool which seems cheaper but still good, and the small set is Pro Value. That’s the newest set maybe 15 years old. My truck broke down 300 miles from my house and I had to get that set from an auto parts store. It stays in my truck all the time.

@chriskelly3678

2 жыл бұрын

@@TylerSnyder305 torque is the answer. 20 yrs Aerospace jet engine experience. Over torque is too easy. Sheetmetal to light alloys. An 8-32 easy to strip or worse.

I've been a film grip/electrician for almost 30 years now and I'm here to tell you that there are few industries in which the saying "Time is money" is taken as literally as it is in making movies. And to all of us who grind and sweat and bleed to make the magic happen, TOOLS MATTER. We arrive on sets with sometimes dozens of 40 ft (and larger) trailers just packed with nothing but tools. And when you are running and gunning around difficult locations there are a plethora of considerations to account for when choosing the best tool for the job, with weight, size, reliability and effectiveness (OK, the "cool" factor is also taken into some small consideration) all being important. For the things we like and need to carry on us at all times, micro-tooling is becoming quite popular and this little nugget fits right in. Especially because we are often working with fasteners- mostly screws, grub nuts and hex bolts- in extremely tight situations. AND, the mounts, platforms, camera rigs, talent rigs, etc. that we build and break down hour by hour, day after day, have to be human (and often animal) safe while also achieving whatever crazy, never before tried, effect that the director or cinematographer can conceive of. Just imagine the kind of rigs designed and built for movies like Dr. Strange and you begin to get the idea. I already have a brilliant little 1/4 inch ratchet that I use daily on the job but can't resist adding one more gun like this to the arsenal. Thanks for the tip.

@wranglerstar

2 жыл бұрын

You guys work like the devil, I understand, hats off,

@alexanderbogander2671

2 жыл бұрын

@@wranglerstar he goes about like a roaring lion, seeking whom he may devour!

One of my favorite and most used ratchets is a snap on 1/4 t72 converted to 3/8 drive. Snap on makes the parts to convert 1/4 to 3/8 and some trucks carry already converted ones. But as a mechanic working on 18 wheelers obviously its not for everything. But when doing A/C compressors and steering pumps etc its AMAZING

The little flex head 1/4 drive you have there is my absolute favourite tool. I've spent thousands on my set up and it really does have a special place for me, i don't always enjoy my work but it genuinely brings me joy to use. Snapon do a three ratchet set with a very long one, a normal one and the tiny one, worth every penny

Just got one today with a 3pc 1/4 kit on sale, awesome tool for dash work. Any ratchet that is a flex head is very versatile regardless of drive size and handle lengh and yes! Wobble plus is a game changer, little 1/4 wobble plus on a cordless ratchet to get anywhere you need to go

40 yr hvac mechanic here the tool is the job!

When I was a professional, I used Snap-On, as an owner I have to look at best use of resources… I can’t afford the opportunity cost of Snap-On, I have other things I need to buy. I do miss my Snap-On tools that were stolen, but I can’t justify replacing them (at least not now)

@treyhart6861

2 жыл бұрын

A single SnapOn ratchet is more than my entire 105 piece socket set.. but like Cody has pointed out, those ratchets really make the job that much nicer.

@xaphan8581

Жыл бұрын

I use icon for home stuff and personally I like icon more. I’m with you though I would never spend 5 times the price for a name just to work on stuff at home

The finger wheel is a must. I've never seen a fingerwheel adapter like what you have there but I've gone out of my way to source 3/8" ratchets that had finger wheels for my trade tools. I'm an industrial maintenance technician. Proto and Blackhawk both make good quality ratchets with thumb wheels built in and I can't overstate how useful they are. Useful enough that I don't use a regular ratchet by choice. I'm going to hunt down some of those finger wheel adapters like you have to add usefulness to some ratchets I have knocking around the house.

I just picked up my first Snap On ratchet (F80) after using my old Craftsman ratchet and sockets for over 20 years. And now I get it. Now I know what it means for a tool to give you the “fizz”

I can totally relate to snap on tools. I am a flat rate technician for. Chrysler dealer. I have spent a small fortune on tools. To add to your point. I’ve personally seen cheap wrenches not fit on Cummins 6.7 high pressure fuel lines on cylinder 6. A friend had to borrow my snap on wrench to get the line off. Time is absolutely money. My tools have more than paid for themselves. Great video!

Thank you for all the knowledge you share when it comes to tools. So many things that I wish I’d learned when I was younger. I had a great father, who because of circumstances, didn’t get the chance to teach me all the little things. Cody is luck on many levels, and inheriting a good set of tools is such an advantage in life!! Anyway, thanks for sharing !

I have Snap-On tools that I bought back in the early 90's. They have been used and taken care of for 30 years now. I also like the semi-deep sockets the best. I have not bought any new Snap-On tools in a lot of years and was not aware of the new style of extensions. I may have check into getting some of those. Thanks for sharing!

Working in HVAC for over 10 years, had to get my 1/4 inch Snap-on flex handle ratchet rebuilt twice at no charge! Still have this ratchet 25 years later, and still love the feel every time!!

My favorite rachet is a similar craftsman 3/8" rachet, stubby with a flex head, more conventional handle shape. It lets me get into small spaces and plenty of torque for most jobs with my bear mits (I do mostly automotive). Going in that same direction I like the 1/4" drive stuff for the same reason but I fill out my 1/4" socket sets with a few extra at the top of the range (like my SAE go to 9/16 and metric to 15mm) letting me use the small format 1/4 drive for medium size stuff. It is all about quality, but I find that I'd rather pick through all the brands. The craftsman stuff that I really like is either about 20years old or REALLY old (I think that I have some 50's-70's stuff that I like). Snapon, well I mostly only like them for oddball snapon only stuff and some fairly old stuff (80's-90's). My current favorite regular rachet is the Harbor Freight Pittsburg Composite (not the pro ones which I think are going away anyway) I just like the handle shape, and the composite is nice when it's really cold or hot, it doesn't conduct heat/cold like the steel stuff. My second favorite is the HF long handle flex head stuff. If there's room for a regular rachet and I need the torque there is usually room for these and these will get stuff loose/tight that otherwise you're going for a breaker or "the big impact." The thing is that even if I could justify all snapon stuff I wouldn't give up my craftsman stubby (I think it's a better design than the snapon) the HF composite (I don't know of anything from the more expensive brands that is similar), or their long flex head (Snapon has very similar ones that you could literally interchange with them that I don't think 95% of people could tell which is which without reading the logo on them when using them, so it's hard to justify when you can have a whole set of one for less than half the price of one in the other). Tool organization... that's another story. I do more in a smaller shop (which isn't small by many people's standards), which causes problems (I don't have room for a tool cart yet I find myself taking tools around to multiple locations all the time). The only thing I've found that I liked were 2 different craftsman organizers both of which have been discontinued, the second of which has been replaced with cheap copies that are not good, and the expensive copies are so much more expensive that I haven't bothered trying them yet.

What's so cool about a small tool like that is you can really feel the torque you're applying with your hand and it makes it very easy to tighten things correctly..

I remember changing out my differential fluid. To get to the bolts for the cover, I had to remove that dust shield for the gas tank, and the only ratchet I could get into some of those areas was that exact little ratchet, I even put a bar on it to get extra leverage and it didn't break. I love that thing.

I bought that same ratchet and the non flex one as well sometime last year before I retired, they're both awesome when you need it. It sits in a Snap On Epiq 84'' Stainless Tool box with all it's big brothers. It is the smallest ratchet I have from Snap On that's 1/4'' drive. I only use snap on ratchets, have between 30-40 of them. I just love the feel of the hard earn money I spent on them. Don't compare to other brands, Snap on for the win!!

Nicely explained Cody. I had a small 1/4" set in a small metal case. I lent it to someone, and when I came to use it next, I couldn't remember who! After that, I had a 'borrow book', name, what they borrowed and when they were going to return it. I owned a small hotel and bar in a village, so a lot of locals and staff borrowed stuff.

Great review from a man who uses and appreciates tools. You give **specifics** as to why you like and dislike something or some feature, or relate from actual experience why something is important or not. More reviewers need to aspire to this. And, you're honest to a fault. Snap-on needs to pay you!

I do mechanic work but mainly body work at the shop I work at and even though I use a lot of snap on and matco and sk and such I have become fond of tekton brand tools they have really impressed me with there wrenches and ratchets etc, they are fairly reasonable prices and have held up really well for me they seems to just work well and have a good feel in the hand like the brands I’m used too and I totally agree with you about certain tools just make life a whole lot easier the average person wouldn’t understand

@rmboffroading9104

2 жыл бұрын

I’ve always lived the the saying buy once and cry once for tools quality always pays off in the long run even if they are more pricey to buy

The right size drive is important. As a youngster I used a Craftsman 3/8 drive to completely tear down my Camaro's engine...even down to the main and rod caps. That poor little ratchet was not the same after that. LOL I should have had 1/2" drive and long breaker bars.

I’m a pro diesel tech. I use Snapon tools exclusively. I also use 1/4 inch to death. I only go bigger when I have to. Those wobble headed extensions are killer.

Just make sure you turn your ratchets off when you store them. As a mechanic myself, nothing is more frustrating than getting ready to use it and you find out you left it on, and now you have a dead battery... 😉

The only Snap-On tools I have are stubby extensions that have the 15° wobble head. My brother told me about them and I bought them to use on the end of all of my non snap-on extensions to give you that extra little bit of u-joint-ish play.

I don't have the stubby that small, but I do have a 1/4" thumb wheel ratchet. You can put in a straight or wabbler insert. You're not going to get a lot of torque (just finger tight), but it's an absolute lifesaver in tight spaces. I use it all the time on my motorcycle. Because it's only finger tight, it's the goto for fairing screws that are so easy to strip or crack. I also filed tactile witness marks in it so when I need a specific amount of measurable turn, I can feel it even if I can't see it. Think adjusting a carb, 1/8 or 1/4 turn of crush against a washer, etc. I will say having an assortment of super cheap pawn shop or chinesium tools on hand can also be a lifesaver when you need to make a special use 1 or 2 time kind of tool. Bend, chop, weld, grind an go. No way I'm doing that with my Snap-On.

Eureeeka! What a great explanation of the "value add" Snap On brings. Did not know that. Thanks, Cody. Mend well!

Having worked on many many projects over the years, I've run into every difficult situation you mentioned... but WITHOUT Snap-on tools. Had I known what I was missing, I'd have a full set of Snap-on by now!!!

My dad has had the 3/8s for years but we have the similar 1/4 Mac version. I was excited the snap on truck pulled into my new job and had it on the truck

The end of the ratchet handle can double as a tamper for my tobacco pipe. Very utilitarian

Cody having quality tools for a job is #1 for me. I work on a ton of BMW and Mercedes, so I use the German brand Hazet. Their specialized tools for those cars alone make them invaluable, and their quality is absolutely top notch. There’s nothing better than reaching for a tool knowing it’s gonna be the best quality tool. Thanks for the video!!!

I like the Tm70b 1/4 snap on ratchet. Very handy. I bought it used, snap on tools are just too expensive for me. I don’t use hand tools day in and day out, but the craftsman set I’ve inherited from my dad don’t give me the “fizz” but they are nearly equally as useful. In fact, I’ve been looking for the rebuild kit for my snap on ratchet and can’t find one (except on eBay.) in my area, the hardware store, Lowe’s, Home Depot, are all within 30 mins. It would be faster for me to replace a craftsman ratchet at Lowe’s than it would be to find a snap on truck. I love their tools, just doesn’t make sense for me.

Having worked on outboards and small engines in the past the 1/4 inch drive sockets are a godsend!

This east coast guy rarely uses a ratchet for working on bikes and atv’s. The motion pro metric T- handle set is priceless with the 1/4” and 3/8” socket adapters. It’s much faster to spin a T-handle than a ratchet. Add it to your tool cart with their handle rack and it easily mounts in your trailer for travel too!

You can put a 3/8 anvil in those 1/4 drive ratchets to make a small 3/8 drive

Wow Sweetloaf looks much older in that video. I have a 1/4” finger ratchet similar to that one except it has a built in reversible ratchet - it’s very handy in tight spots and under dashboards.

I have and still buy snap on but I won’t lie, I do get the fizz when I find the same exact tool and get it for a lot cheaper not from a tool truck. It’s not very often but still very satisfying

That little pink one might be a great way to get Sweetloaf into DIY, could make for some great Father-Daughter bonding :)

Bicycles. I work on bicycles. Not as a pro but I can fix anything any of my bicycles may require. And most of my work which uses traditional hex bolts or allen head fasteners can be handled by a 1/4" set. Another tool (not for sockets) which is part of my EDC is a Crescent RT24 4" wrench. What used to be called an ignition wrench. Now, as a recent acceptance of my geezer status ( I've turned 65) and dealing with arthritis in my hand , this little tool provides what I often can't : power and dexterity between my thumb. And index finger. Check it out. That and my SAK Hiker get through a lot of tool requirements. Often it's all I need.

Great video, Cody! Thank you for showing us all those tools!

Buying high quality tools can be accutely painful until the moment you use them and wonder how you managed without them. Buying cheap tools is a chronic source of pain that will never leave you. The money you save on cheap tools will soon be gone as you waste time finding a way to get round the ineffectiveness of the tool. Upgrading your tools as you go along is the only way most of us can go because brands like snap-on are so expensive. I certainly cannot afford a full snap-on start up kit, but I wouldn't even blink an eye before I bought a set if I had the money available. Plus, it gives you a lot of pleasure obtaining a particular piece that you know will change the way you work for ever. Great video and the example you gave of why you like the brand was spot on. Thank you. God bless you. X

I still own a set of drop forged metric box end wrench’s from K-mart. With those box ends ad a 3/7’s inch SK Wayne metric socket set I went to work on a 60 VW Beetle. I still own the wrench’s 52 years ago. New could afford Snap On or Mact.

Mechanic here over 13 years the snap on tools I have mean very much to me extremely valuable tools been on the line a man and his tools nothing can stop him,

With a long extension and the articulating handle it’s like a speed wrench or what ever you call it, the thing with the off set handle!

I don't have a stubby 1/4" ratchet, but I do have a stubby 3/8". It is definitely my go to when I am worried about breakage, or delicate threads.

Wow. The extensions and the 16 degrees - huge man. Great demo. Best video I have seen from you in a long time.... wait... mid-length sockets... awesome. And love the spinning-reel handle on that wee ratchet.

I love my stubby flex ratchets. I use the 3/8" drive the most though. I have 1 locking and 1 non.

Just got the fixed handle 1/4” Williams fine tooth ratchet from my in-laws for my birthday. Can’t wait to use it!

I’ve got the baby snap-on 1/4” drive fixed and flex head. Definitely worth having in the tool box.

At work 90% of what I do is 1/4" drive, but there are a few sockets I use that don't come in 1/4" drive. I bought a nice ratchet and nice sockets and a 1/4" to 3/8" adapter, and I've never broken one, even putting some real beans behind it. Don't be afraid of the small drive, its still a significant tool.

Wera has a small kit with a ratchet, sockets, bits, and a small screwdriver that you would probably love/possibly own.

I started with cheep tools until one broke then replaced it with Snap-on equivalent. I noticed Knurling on the shafts of the extensions I could have done with that back in the 1980s for extra grip on oily jobs..

I have a Kobalt 3/8" extension i've been using for 15 years that i didn't know did this same trick, the 16 degree swivel and then snap into normal position. Learn something every day.

Very informative video.

Yesterday I Thought, What was that!!!! GENIUS!!! Never saw that Ratchet ADAPTER. I do have some ratchets with a built on the rachet head knurled version. Love it. What does Snapon call the removal spin adapter? Gotta have it. 💚🌵☘

Along with all your other points I am a heavy equipment field mechanic and people say why not harbor freight etc.. well when you’re in the field sometimes you need the tool that is less likely to break I’ve seen harbor freight cornwell Mac tools snap where snap on didn’t of course you can break anything with enough leverage but I can’t be running to a harbor freight in the middle of a job to warranty a tool that broke.. I prefer the better tools for all the mentioned reasons but the most overlooked to me is they are reliable and sturdy

I never knew about the 16* offset on the sockets and extensions. Damn it’s all fallen into place. I was close before, I hate buying cheap shite but and want American. This truly just set it.

Hi Cody from Australia I have been working on everything thing from chainsaws to the very biggest earthmoving machinery for over 30 years and would never use anything other than snapon ratchets they are the best and worth the money. I would recommend to you to get a swivel head ratchet it will change your life. Keep up the good work 👍

8:00 that is a cool feature i have never seen before but then my shade tree needs never exceeded what Craftsman offered.

Hey Cody, you should look into making a discord server so there is a place we all could share links and such to tools and things we recommend. just an idea. love the table top videos.

@zakbrinkhoff324

2 жыл бұрын

I'd spend to much

Good video, thanks for reminding me to inventory and upgrade and replace.

Just so you know you can get the 3/8 parts and they fit in the little 1/4 stubby so that you have the smaller head and snap on tools are the way to go.

in regards to snap on haters amateurs use time to save materials professionals use materials to save time

Right on about that lip in the socket that will hold the bolt out. I tried finding one at a big box store - no luck. I enjoy the benchtop reviews. Where's the electron microscope?

That little thumb adapter is genius!

Auto mechanic here ,i have a extensive collection of snap on 1/4 drive stuff its the best imo.the chrome universal 1/4 are really nice.

That’s a nice new feature on those extensions (the wobble vs non wobble feature) it must be something new. All of mine are the old type; which means two sets of those things.

I am the current caretaker of 4 lifetimes of tool collecting, mostly US made Craftsman. However Snap-on definitely has a place in my boxes, especially the drive adapters and 1/4" extensions. Even though the Craftsman is warranted they replace them with stuff I could twist off with my left hand

That pink one is very pretty. I think I could convince my daughter to lend at hand in the garage if I got her that. She’s always loitering while I’m out there, this would really win her over

Thank you so much Cody.

Those wabble extensions are awesome! I've been using the harbor freight version for years!

I've been a mechanic in one form or another, most of my life and have acquired a pretty good set of snap on tools. I've been told over the years, "harbor freight tools are guaranteed for life as well and ¼ the price, go with those" and my response is always the same. If I have to take advantage of the warranty, I'm losing money, with snap-on, I rarely need to use their warranty, the just don't break" . You have the occasional ratchet that need rebuilt or screwdriver blade needs replaced but those are rare and you ALWAYS have a back up for your essential (even if it's a cheap backup to get you by till you see the tool truck again).

You saying us East Coast Mechanics are ham fisted? Long time subscriber here and being a mechanic for half my 35 years of life, first on cars and onto locomotives, 1/4 and then into 3/8 were definitely my most used sizes. And buy once cry once is completely true. Keep up the great work, sir!

I giggle when you take jabs at us East Coast guys, even though I’m a Midwest guy. Thanks for showing us some love. Glad to see you’re recovering.👍🏻

Love the articulating one is awesome for just spinning stuff in

Nice explanation . Very cool 😎

Believe it or not Cody my wife actually loves tools as a gift to her last year I got her the stubby 3/8 drive and made it into a keychain and she absolutely loves it 😁

10mm? I don't think they actually exist. Check any toolbox and there is always an empty slot where the 10mm socket is supposed to be. Love that little articulating wrench. So perfect for all those time where your hands barely fit in there let alone a wrench. Thanks for sharing with us.

@E.L.RipleyAtNostromo

2 жыл бұрын

No, sorry, i use 10mm and 12mm all the time. I have those sizes in Gearwrench flex head ratchets and Craftsman 1/4” and 3/8” drive sockets in both standard and mid-length sizes. Of course I bought all these nearly 20 years ago, so things could have changed.

@michaelbamber4887

2 жыл бұрын

Ha, yeah. I bought a set of gedore sockets and it has 3 10mm.

@cwrt3

2 жыл бұрын

Got to the point some tool makers sell sets of 10mm sockets only in various drives and lengths. That's how often they go missing.

@michaelbamber4887

2 жыл бұрын

@@cwrt3 some were in every country there is a pile of 10mm sockets, taken there by the socket fairy...

I think I need one of those spinners! I checked and Amazon has the Williams 30010 1/4-Inch Drive Spinner Disk equivalent for $5 if anyone is interested

@wranglerstar

2 жыл бұрын

The $5 version is not US made,

@steveseattle6791

2 жыл бұрын

@@wranglerstar Dang! It's been a bit tough to tell with some of the Williams stuff. Love the ratchets you recommended though. Thanks for the info

@AmericaFirstKorey

2 жыл бұрын

@@steveseattle6791 imported Williams will have a full numerical part number (123456) and the US made Williams will have both letters & numbers (ABC123) etc. Purchased the USA Made Williams 3/8" drive spinner for $18 last week ("Williams B-70"). The Williams 1/4" drive spinner is identical to the 'Blue Point' offering by Snap-On.

I use 1/4 for everything I can. Usually up to 15mm and sometimes an adapter with a 17 or 18. I work on cars

Nice! My sewing machines could use 1/4” tools. SweetLoaf…. Oh my! She’s becoming a young lady!

Correct me if I’m wrong but ASE master certified techs use hand tools to come up with book time, and use pneumatic and drills impacts ect to come up with warranty time. That’s why techs get paid so little for warranty.

I was gonna pick up those ratchets soon. I've never regretted buying a snap on tool. People who complain, just don't know. I've also been wanting them wobble extensions as well.

Hey Cody! I was wondering if you could do a video or explain if someone should have a 12 point, a 6 point socket sets, or both? And why?

Cody would have an outstanding N guage train set.

U can use the 3/8 hack. Buy a rebuilt kit for 3/8 and put it in the 1/2 stubby

Beautiful watch, anyone have any idea what it is? Couldn’t make it out other than the Mora strap

When you bend the handle of the little ratchet it works like a crank handle for spinning in bolts real quick pretty neat

Wow! Your your video was so good I finally get it about snap on. Thank you.

Small engine mechanic myself. The quarter in drive stuff is essential

Snapon is great. And, you have given us the Williams alternative as well. Plus the fizz is important as well.

Great video keep it up👍