Honestly, given how fast these beyblades move in the battles I've seen so far, I'm not really surprised that the beyblades are getting messed up.

@dominic8079

Жыл бұрын

Ya

@iv624

Жыл бұрын

Right and it's not even full metal to metal contact. Inside the blades are a bit hallow and have more plastic compared to metal fight wheels being all metal.

@TheMercian13

Жыл бұрын

I play tennis. My racket needs fixing & occasionally replacing entirely. Part and parcel of a sport.

@slushyrunner4677

Жыл бұрын

​@@TheMercian13 I agree occasionally needing to replace It's all fine and dandy until you have to replace it every couple of days.

@slushyrunner4677

Жыл бұрын

​@@TheMercian13 I'm not mad at anything for contacts. Just Disappointed because you know Hasbro It's going to make these cheap and less durable.

...at some point any material reaches their mechanical limit. Problem with Beyblade is that they have to be cheap, easy to manufacture and durable. You can't have it all, so some compromise has to be made. If they were to make beyblades more durable that would certainly reflect in the final price...:/

@olivers.7821

Жыл бұрын

It could however mean that you would buy less often the same bey over and over.

@t850

Жыл бұрын

@@olivers.7821 ...unfortunately relationship between cost and performance is far from linear. Usually cost rises faster than performance so unless cost is not an issue it's rarely worth the performance gain. For example if you want a fast car that runs 200 mph, a 60k $ Corvette C8 will suffice, but if you want a really fast car that runs 300 mph then you will have to buy a Bugatti for 50x more...:/

@ikarimisu0184

Жыл бұрын

​@@olivers.7821its not that simple

@t850

11 ай бұрын

@@MrTyger ...if beyblade X is indeed the "fastest" generatio as it is advetised then the hitting forces are stronger than those of Metal fight generation. Energy increases with the sqaure of velocity (speed) so even a small increase in speed can have dramatic results...:/

@hoseki4031

8 ай бұрын

I remember replacing my metal fight's performance tip with a metal performance tip from a knockoff metal fight beyblade when I was a kid since the original's would eventually get grinded into nothing.

Not worried about the metal denting as aggressive as the shapes are. Only one full break so far from everyone who has gotten the beyblades.

I would keep in mind, a lot of the people doing battles with these beys are not doing it against other Beyblade X beys. Some people have been doing battles against MFB beys, which are way heavier, and more jagged, and will cause a ton of damage to these beys.

@wormthesillydino4946

Жыл бұрын

I’m guessing that’s why there’s so much damage to the bit lol 😂 , but it’s honestly never a good idea to battle different generations with each other

@jayredharpstudios9672

Жыл бұрын

I know LeftBurst did a video where it was (I believe) 4 Burst Beys vs 1 Dransword so yeah people are doing cross-gen battles but it wouldn't surprise me if people are doing MFB vs Beys from Beyblade X

@aya-7001

Жыл бұрын

@@jayredharpstudios9672 leftburst themselves did a mfb vs beyblade x battle

@jayredharpstudios9672

Жыл бұрын

@@aya-7001 okay, I only saw the burst vs Beyblade x battle

@Scout_Warrior

Жыл бұрын

Zankye had X vs X and only after a few battles, he had some wear to the metal.

Oh god. Not the Gingka jar O-O. Also, they mentioned trading card games in that list which sounds pretty wild to me. I kinda want to see what they cook up for that.

Thanks for bringing this issue to light. This does seem like a pretty bad quality issue. Hopefully TT will be able to fix this as the new gen goes on.

@Brokensongbird27

Жыл бұрын

This**

The reason for this damage of the ratchet is because of people using metal fight beys

@billyholmes169

Жыл бұрын

Good point, that relieves me since I don't have any monstrously strong metal fight Bey's

@packman3979

Жыл бұрын

@@billyholmes169 you don’t need a strong metal fight bey to damage the ratchet. The metal fight bey is short compared to bey x that it’s constantly hitting the ratchet at high speeds

@Deity_devil

Жыл бұрын

Lol I use Diablo nemesis against my DranSword

@Taliikitsunee

Жыл бұрын

The only metal fight I got at the moment is Gravity Perseus, and I got Dark Cancer/Gasher on the way.

@BokuVR

8 ай бұрын

Not at all. My X bey's ratchets are damaged and I've never used them against metal fight beys. X beys tilt A LOT, so its pretty easy for the beys to hit the rachets. I've even had some of my X beys twist off it's opponent's rachet from the blade in a battle.

We all know beyblades wear but when they wear down to the point it’s unusable for casual and competitive play in a short amount of time at that point it becomes a waste of time and money especially with how expensive it gets and we got inflation going on

I think there's a good side to the breakages. With some beyblades breaking, Takara Tomy can work on fixing the problems before the actual release of the beys Also for the article, did you notice the Takara Tomy logo in the corner of one of the pictures on the site that shows the anime renders of the characters? I feel like that tells us that Takara Tomy will be in charge of this, but I understand your choice to not be 100% on it.

I'd imagine that TT is trying to get back into a metal fight production mindset. Metal Fight had really durable plastic and metal, yet they weren't immune to chipping/breaking. But I'd blame the parts for their breakage, since I often see unsupported/hollow pieces get snapped more than a filled in part (4d metal parts, contact points on burst beys, etc.) Maybe there's a new composition for the metal and/or plastic.

@thecampingyeen2524

Жыл бұрын

I think of parts like the first version of horn 145, that was incredibly weak and was notorious for breaking

@pokemastersalgaming8271

Жыл бұрын

@@thecampingyeen2524 exactly!

Is anyone surprised about this when they’re going as fast and hitting as hard as they do? It’s part and parcel, things break and wear down with use. Also many of these issues are arising because the new Beys are being put up against MF Beys that are much heavier.

Remember those white LEGO gears with its firmly rotating hole-part? I think this mechanic would rescue the metal/plastic durability during rough battles, when the blade, being a separated part, firmly rotates a bit to absorb overpowered hits.

Why did you have to do my boi gingka like that? XD

I’ve also noticed that when you fight c beyblade a they leave tiny “metal dust” particles that can be seen on the stadium. These are a hazard for our respiratory systems.

5:12 AYYOO

@josuke83

Жыл бұрын

can someone help explain to me the joke? I only laughed at the jar with the bgm, lmao

@SDseb

Жыл бұрын

@@josuke83 You’re too innocent for the joke.

@josuke83

Жыл бұрын

@@SDseb since u mentioned it, ik it's something dark or dirty

Probably not a flaw in the quality of materials, but rather the design and function of the Beys due to the High Velocity Impacts

They def need to make sure there is as little plastic exposed as possible near the contact points

Body pillow perhaps of gingka or medoka or even ryuga i cant wait see if they gonna make spin steal bey

OH GOD THE JAR

I was expecting the gear part of the bit to take the most damage from always grinding on the edge.

It might have to do with the recoil cuz those high speeds are probably part of the problem that or they need to switch the plastic for some rubber

I am not surprised but these Beyblades are sustaining so much damage. Eddiehh recently posted a video of him battling them in his really big Stadium using dransword and hellscythe. Every single time they made contact they launched themselves out of the stadium, there was almost never a second contact. If the contact is that violent hit a big Stadium I can't imagine what it's going to be like when they're being slammed into each other by a gear strip. The gear strip and the bit is also going to be an issue. If they didn't make them out of suitable plastic then the large amount of RPMs that these things are being subjected to is going to strip the teeth off of both the bit and the strip.

Other than the middle part the metal seems alright. I wonder if the people with messed up middle peices used mfb beys against them.

Means the beys are hitting hard!! If they want it to be treated like a sport they should be ready to buy new parts for replacements.

@giovonniiclayton

Жыл бұрын

Don’t make excuses for bad durability obviously at some point you would need a replacement but durability should last a good amount of time

I shouldn’t be surprised by the durability issues, seeing how these things battle. It’d honestly be a feat to make them hold up while moving that fast.

if someone decides to make a life size X stadium then the hard impact will probably destroy a bey in one shot.

Bro the rubber on my savior valkyrie got awkened after 1 day of using it

How will they address and combat counterfeits?

@nuc

Жыл бұрын

Maybe if they release quality X beys everywhere… then maybe people won’t get fakes so much.

Beyblades have never been this intense so makes sense

Tbh as long as the bey still works battlescars are awsomme

Its not broken its just awakaned.😅 Jokes aside with how much X hits and the metals head. Its like you are battling multiple rage/guilty and we all know how that turns out.

@bladerbrawlers

Жыл бұрын

Play Guilty blade to harsh it can snap exploded into 2 pieces.

I think it would be so cool i to see beytubers either make a movie together or a small animated get together film.

There is definitely more fighting and personality in these beyblades. So this level of damage I think is appropriate especially since they make more contact with each other, especially in such an aggressive manner. I look forward to the boosters and replacement parts. Doing maintenance would be awesome, it would be the equivalent to the fun you have from sleeving up cards in TCGs.

LeftBurst did have the beys battle against the metal line with a modified string launcher while the x beys only had the normal ripcord launcher so the x beys were getting rekt

@josuke83

Жыл бұрын

that beyblade x winder is as powerful as db launchers tho

Maybe they need metal tips for future beys that can use the same system

@NEKOplaysgamez

Жыл бұрын

That would probably damage the stadium a lot more tho

I expected this one since its a high speed clashing

Pretty sure the owner of that Dransword battled his bey againts metal fight beys which are shorter and obviously cause more damage to the plastic

i'm happy i got informed abt this, i'll use burst till this issue is fixed

@iambravvo

Жыл бұрын

Good call prices will also most likely be less expensive

I think it’s kinda the normal plastic they’ve been using but the wear is elevated cuz of the x gimmick

You did not just make a jar joke . . .

i wonder at some point what the beys breaking in beyblade x would look like in the manga and anime

@LeighReiLeighRei

Жыл бұрын

chapter 1 beyblade x manga already has a broken beyblade 🗿

@foxgaming1084

Жыл бұрын

@@LeighReiLeighRei yeah i saw that after i made the comment.

i hope TT will fix this problem so the beyblade x beys aren't sparking launchers

Breakage is common for Beyblade, and that Beyblade X is more aggressive should be as expected. I’m not too bothered by the recent reports, it seems to be happening fairly rarely.

@bladeedge481

Жыл бұрын

Fairly early that's not good

@LucarioShirona

Жыл бұрын

@@bladeedge481 if we’re talking about that one breakage regarding the one part that supposed to keep the Blade and the Ratchet together, there so far have only been one occurrence and that seems more rare if anything. And this has so far been noticeable with DranSword, the most aggressive. No doubt TT will take notice and make a second molding with improvements like they did before.

@bladeedge481

Жыл бұрын

@@LucarioShirona I hope they make they reinforce it before official release or later on

After mfb era beys just got budget axed like crazy u can feel the quality diff in the plastic and metal

NO NOT THE JAR

It's no surprise with how they hit and move.

Oh lord, anything but the Gingka Jar 😭 😂

@nuc

Жыл бұрын

I’m both glad, and mortified that people got the joke.

@Liliana_the_ghost_cat

Жыл бұрын

As a Vaporeon fan, seeing that jar brought me traumatic memories.

@SDseb

Жыл бұрын

@@nuc You have no idea the power we possess.

@kronini9359

Жыл бұрын

💀

I agree with Avery because literally there’s these reels on the stadium making the bayes hit the stadium wall a lot meaning damage they should really zoom out the wall a little bit

Could be from that speeding up from the gears then a hard impact with the other bey

I've used mine and it does have minor damage but for the most part still holiding up.

Luckily for me im only collecting these beys. So my beys wont be all messed up because they're just gonna be on display! Lol

bro i hope they fix this with the other products

Quality is good but what do u expect when blades clash so fast its obv

@King-Sylur-rg7zg

Жыл бұрын

I agree with you, Some beys will do more damage because the way they're design and it's common for beys to break due to from battling alot

I hope they might fix before they go international

The best part is the new character being like,ITS LEFT SPIN TIME!!!! And Left spin'd all over the place.

If they put in the extra effort for very durable blades then the price would shoot up dramatically to maybe 40-60 per

@giovonniiclayton

Жыл бұрын

I rather pay 40 dollars for a one time purchase than 120 dollars to get three copies

well,, more distruction! more fun!

My big bang pegasus face bolt broke on the 6th battle with vary Aries it was not good the bottom of the face bolt flew across my room but I can't use pegasus anymore

I'll be honest...before I sink my teeth into Beyblade X proper. I might get a couple of KO ones and see how much fun I have with them. If I have no fun, that's most likely from the KO ones being trash, but if I get a decent amount if not GREAT amount of fun, then I'll be getting the officials. But before I drop $20 a bey, just want to see if the $5 KO ones are anywhere NEAR the same quality.

My pro series super Hyperion lightning chip broke a tooth

sounds like a hasbro problem

Don’t worry it’s not broken it’s just awakened 😂😂😂

That metal reminds me of hasbros metal from metalfight

I'm gonna be careful when I get these Beyblades I'm huge fan of yours linluc

No hasbo let’s gooooo

Why people are making this as like its a big deal? because its a natural thing that will happen for a beyblade to have dents, wearing down after many usage its gonna be showing signs of a product wearing down

5:12 Those who don't know :😃 Those who know: 😨😨 poor Gingka 😭😭

It's awesome that beyblade takara tomy will be in American stores it will mean that hasbro won't be thr only one to have beyblades on store shelves in America, which also means hasbro will have to stop being so cheap or else they will completely fail

First FINALLY and i hope they fix that problem i dont want to damage my bey cuz i wont be abl to play then

@ToinkedyDoink

Жыл бұрын

You aren’t first though

1:52 thats what happened to mee too good thing i bought a new one

I lost count the number of shattered Guilty blades in Malaysia. Lol Action figures? Marketing and merchandising department of beyblade is laughable if compared to other toys and hobbies in Japan. There should've been action figures of bladers and avatars since day 1.

Pretty certain for rn ive seen damage mostly on dransword

@nuc

Жыл бұрын

Maybe it’s the shape? More exposed plastic + the most aggressive design.

@DraodVideos

Жыл бұрын

​@@nuc The reason this is only a Dransword issue as of now is as you said. The shape. Thats really it. It has a mostly hollow shell of metal and I assume decent plastic. In theory it should hold out well. But its probably moving at well over 6k rpm so it slamming into anything well rounded like well Hellsscythe would just lead to major scuffs. As for the breaking. I'm going to assume its from warping plastic from heat generated from the initial hit on two dranswords slamming into each other.

The reason I just collect Beyblades never play with them , they are quite expensive this days 😂

@giovonniiclayton

Жыл бұрын

I feel you but that could be me the whole reason really liked beyblades was battling them and looking at them

Awakening in beyblade x is weird

Who are they battling ? Kratos? 😂😂😂

my metal fights beys wgen i had them, main breakages that i usually encounter r the spin track and performance tip. burst, my vanish blade broke... even though i dont battle it that often tho....but yea, every generation has its issue. as long it doesn't stop u from enjoying the hobby.

@giovonniiclayton

Жыл бұрын

Cost analysis would stop one from enjoying the hobby especially with how inflation is with everything so if you have to buy another copy within 5 months it becomes a problem

Theres metal on plasic contact of course theres gonna damage

There's no Beyblade will survive without having a damage in the blade

So basically the main gimmick in massive amounts of speed, seems to be the down of the integrity of the beys. Basically they hit each other TOO hard

*Beyblades smash against each other, obviously going to damage after a few battles in, and MOST players dont even take care of their Beys.* *Is somehow surprised when they get damaged*

@nuc

23 күн бұрын

@@ThyranG the main issue was how quickly damage appeared. Also, The damage shown in my video and my thumbnail lead to a small design change from TT and now Hasbro. So there WAS a problem.

Well of course its gonna break.. i broke almost all the beyblades and launchers i've ever owned it's not a never seen before issue.

@giovonniiclayton

Жыл бұрын

Same that’s why I quit burst back in 2021 because it became a waste of money just short term fun and that’s when I realized I should invest money in something that last like transformers for example what’s the point of spending hundreds on something if you got nothing to show for it after 5 years

Probably they are fighting with metal fusion beys

the reason tt is not working with hasbro anymore is because they produce hasbrobeys themselfs now. sad sad, should have sticked to metal fight

So glad I saw this before buying

@nuc

Жыл бұрын

I’ve been doing a lot of research, and these issues are pretty isolated and seemingly rare. Denting and scratching we could expect but full on breaks I don’t think will be common.

I mean, this is early, and spinny metal blades are gonna smack and cause damage, that's all part of the game. I think as long as the metal can hold up, we'll be fine.

@giovonniiclayton

Жыл бұрын

Pretty much as long as there’s no breakage or wear that makes it unusable or illegal in tournaments I would be fine but if it’s the case we’re it does happen I won’t waste my time with this gen

Thats because they had to add the burst gimmick with the whole ratchet thing. Just remove the burst gimmick and then they could make the ratchets smaller so they don't get hit as often

Favorite Beytuber

@THEIMPERFECTGRAPE

Жыл бұрын

Cap jk

I'm not suprise if Japanese test it first. They always show us some troubles with their toys. Wether its action figures, or toys like beyblade. They can test it out to that X-treme, because its cheaper there in Japan. For my country, I don't know if I can actually buy it and expect it to.... break. 😐 Its expensive! 😅

Hasbro Beyblade Bit Beast Spin Dragoon V Force Spinning Spirit have you have one before

Metal for Ever!

I’m hoping hasbro doesn’t get the licensing anymore because they pretty much ruined the beyblades by trying to add all the gimmicks that nobody asked for and also just being cheap with the beyblades too. I hope beyblade x gets a better licensing for the rest of the world and actually make beyblade almost if not exactly like Takara Tomy

Metal on plastic is of course going to cause damage and every new gen isn't going to have the best durability.

beyblade x's new gimic is planned obsolescence

burst sparking still best season in all of beyblade

😢😢😢😢

Yoo

What’s really interesting, is the fact that hasbro beys are more durable than gen x 😳…WOW! I know people will argue using quality control & what not but you’re seeing the results for yourselves lol

Another reason can be people are probably just slamming the beys on the concrete, taking pictures of the damage and posting it online to make lame untrue stories.

@nuc

9 ай бұрын

I don’t really think so with where it’s breaking. A lot of the breaks in this video are from inside on the plastic. Breakage doesn’t look like a big deal though, just something to be aware of.

@bruno_3020

4 ай бұрын

Haha HELL NO i’ve had 2 of my X beys break from launching them and using them in battle you can look on my community page for proof also the plastic stress marks prove that this stuff cant be easily faked as you say, do research instead of dickriding.

Metal fusion still the. Goat

E