Here are the most common question Q: Where can I get the Harness A: The only place to get my harness is on my Website here www.tiffanygordoncosplay.com/3d-cad-stl-files/ahris-nine-tail-harness-from-league-of-legends-3d-cad-stl-file (Please note that there are people trying to sell fakes of my 3D CAD file and they will not work! My Website is the only place to get this harness.) Q: What did you use/where to get this material A: List of all materials with links for them are in the video description Q: the pipe doesn't fit in the harness A: I used CPVC Pipe (not PVC). Make sure you are printing the harness flat on the bed, some printers may have saggy stair steps causing extra material in the hole and you might have to sand to clean up or open the hole more. Q: Fabric tails fall off the pipe A: Stuffing the tail will help them stay on the pipe. Having a smaller opening for the fabric at the end helps it stay. Your angle of the pipe may be facing down too much so bend it upward more. You can always hot glue it to the pipe to permanently attach it or you can tape/velcro it in place. Q: How heavy is it A: That depends on how much stuffing you use and how long of the pipes you use. These will have a bit of weight and is better to have them either straight by your sides or do a clam shell shape around you to offset it. Recommend having a wider nylon strap for better support. Q: How to travel A: Mine fit in a car. You can also add to the base of the pipes male/female CPVC pipe threads to detach each of the tails.

From the shape and the height, these are the best fur ahri tails ive seen! Thank you for this tutorial, i will use it for my tails!

@TiffanyGordonCosplay

3 жыл бұрын

Thank you so much and Im glad you found the tutorial helpful! Make sure to tag me on IG when you finish your own build, I would love to see your final outcome 😁

@jynx8875

3 жыл бұрын

@@TiffanyGordonCosplay no problem, it's the best for the 9 tails I've found so far! And sure I will!!🥰

1:20 "I recommend watching a movie" hahaha, I lost it there.

@TiffanyGordonCosplay

3 жыл бұрын

YeEe!

My friend and I are cosplaying Scorpia and Catra from She-ra and your tutorials have been a life-saver for me. Thank you so much for sharing your knowledge.

@TiffanyGordonCosplay

Жыл бұрын

Aww thanks! I'm glad to hear that my videos are helping! Best of luck on your Scorpia and Catra builds, I may have a Shera build on my Cosplans list as well 😁

Amazing work and great video *^*

@TiffanyGordonCosplay

10 ай бұрын

Thank you 😊

This is really amazing! I do have a question though. Do you have an idea on how to poossibly make everything detachable for storage and travel?

@TiffanyGordonCosplay

3 жыл бұрын

Thank you! CPVC pipes have threaded male and female attachments that you could potentially attach to the harness to disassemble each tail.

@lucysworld1483

3 жыл бұрын

@@TiffanyGordonCosplay thank you so much for your reply! ^.^

Wooooow

Hey! I love it ! Do you know what to replace the printed part with?

Amazing job

@TiffanyGordonCosplay

9 ай бұрын

thank you!

This is much better than what I expected! I guess you can use the same method for a Doc Ock version. Great job!

@TiffanyGordonCosplay

3 жыл бұрын

Thank you! Also yes, you could definitely use this method for Doc Ock as well as lots of others cosplays 😁

I want one so badly for this Halloween

@spiritshadow4996

Жыл бұрын

same there all so expinizve to buy tho lol so ima try to make one idk wht im doing

Hello? Could you tell me how much filling wadding u used for one tail? It would help me a lot to plan my cos. Thanks

Hi, Tiffany! Thank you for the tutorial. I'm thinking about using some of the techniques you used for the tail for one of my cosplays. I'm still a noob at prop making but if you don't mind, what size elbow joint did you use for this? And where did you buy your faux fur?

@tinytaiga

2 жыл бұрын

did you ever find what she used? im making these and these are the last parts i need but i cant find them :(

@TiffanyGordonCosplay

2 жыл бұрын

see my link for faux fur, and the elbow piece is a 1/2in 90-Degree Spigot x Slip Street Elbow Fitting that you can get from Home Depot/ Lowes

@tinytaiga

2 жыл бұрын

@@TiffanyGordonCosplay thank you so much! I went to home depot 3 times today because I was so confused on what elbows to get, come to find out I got pvc instead of cpvc LOL

do you wash the tail after applying the acrylic paint go get the fur nice ?

this is so amazing !!! i just have a question, what is the weight of all this ?

@TiffanyGordonCosplay

2 жыл бұрын

thanks! there is a bit of weight but its not too bad. The only thing is that the harness straps go around your tummy so it can be a bit uncomfortable

@gaotyb8851

2 жыл бұрын

@@TiffanyGordonCosplay thanks !!

THANK THE LORDS OF COSTUME MAKING THATS THIS VIDEO EXISTS!!! I would never would have known how to make this without you. thank you!!! ALso, do you need 3 yards per tail or only 3 yards overall?

@TiffanyGordonCosplay

2 жыл бұрын

thank you! 3 yards total

@aprilsanimals6287

2 жыл бұрын

@@TiffanyGordonCosplay Got it, Thank you!

sana all

Hey Tiffany! I’m from aus and I have been saving up and collecting everything I have needed to make these for a little over a year now! Finally they are complete and I have never been happier, thank you so much for the video, tutorials and patterns 🩷🩵

@TiffanyGordonCosplay

10 ай бұрын

So glad to hear it and I'm glad I was able to help 💕 Tag me on socials so I can see it completed 😁

Thank you for the amazing video! Which is the diameter of the tube you are using?

@TiffanyGordonCosplay

9 ай бұрын

1/2in

Hiya! Great tutorial! If you don’t mind answering. What is the fur called? I’m looking on Joanna’s website and I can’t find any. :(

@TiffanyGordonCosplay

2 жыл бұрын

faux fur/ fun fur. I also have a link in the description for it

How many metres of fur fabric do we need for all 9 tails? Like what’s its width and length?

Hi Tiffany! I was wondering if the harness really does support all the weight of the tails and if i could do anything for them to have a little bit more support. I really hope you can answer me, LOVE your tutorials!

How will you adapt the cosplay to wear the harness?

@TiffanyGordonCosplay

3 жыл бұрын

When I had the full cosplay on, the harness hid under the corset and you could not see it 😊

I know this is an older wig, but i dont own a 3D printer is there any way to make it without it?? Because i am making base ahri skin and wanted to make the tails

@angelic.com_

Жыл бұрын

Hi! Where you able to solve this? I don't know what to do either! :(

Hello, where can I buy a 3D model of tails attachment?

@TiffanyGordonCosplay

3 жыл бұрын

Update! I now sale the 3d CAD/.stl file for the harness on my website =]

i wish the tail could be bended. you know, like to change the tail's positions so it wont look stiff. what material can be use to create a bendable tail?

@TiffanyGordonCosplay

2 жыл бұрын

You would need to 100% redesign the the harness and attachment parts to have them bendable but personally I did not want them to bend as this would change the full peacock look that I wanted for the tails and your center of weight would be really off and hurt your back.

@nolent216

2 жыл бұрын

@@TiffanyGordonCosplay oo. because i seen this tail products on online shopping sites and some of them says bendable so i thought instead of buying them in such high price why not making one as it would not cost me that much but all DIYs. I never did my own DIY cosplay before so i dont know much about making them but your video seems really helpful. Haha, the fact that you said hurt my back concerns me just that little bit. hehe.

@amandabuss1286

2 жыл бұрын

@@nolent216 I use threaded rods!

@nolent216

2 жыл бұрын

@@amandabuss1286 threaded rod? will definitely look into it. thanks Amanda

I wanna make these for a Halloween consent at my school

I don't know if you'll see this, but I printed the model I got from your site and for some reason, the 90-degree joints don't fit in the holes in the model? Should I just try to make the holes bigger myself? I'm honestly at a bit of a loss at this point. Any help would be extremely appreciated!

@TiffanyGordonCosplay

Жыл бұрын

First off thanks for getting my harness model! Things to check, make sure you are not rescaling the CAD for Printing and I would recommend printing it flat on your printer bed because if you change the orientation it may cause dropping on the holes. Second, make sure you are using CPVC pipes (not PVC) as the 90 degree joints may be different. For the 90 degree joints the smaller part should be what is glued into the hole and the larger part is what the CPVC pipe will insert into. Also depending on your printer settings it may cause there to be when you print more droop between each print line or overhangs. If it is off by a tiny bit you can also go back in with a sanding drum for small clean up to open the hole. Hope this helps!

@nekonyacosplay

10 ай бұрын

I printed the model too and I ran across the same issue! I ended up purchasing some hobby wood and using a 21ml hole saw to drill and craft the part myself 😊

Hi!!! How many yards of fur did you use?

@jynx8875

3 жыл бұрын

she said you will probably need 3 yards in the video

@TiffanyGordonCosplay

3 жыл бұрын

Yep around 3 yards! 😉

Hi ! I come here to make my own spirit blossom ahri. But i'm french and if all the explications are clear, i can't found how many fabrics i need because yard are not used in my country :(

@5292121

Ай бұрын

1 yard = 0.91 meters.

@lunastralee833

Ай бұрын

@@5292121 How she makes with 3 yards 9 tails with 2 faces to cut out from the fabrics ? It's just impossible

Did you end up stuffing any part of the tail?

@TiffanyGordonCosplay

2 жыл бұрын

There is a little bit of stuffing in them so they keep a more round shape 😁

Where does the fabric come from?

@TiffanyGordonCosplay

2 жыл бұрын

please see my links in the description =]

Can I use pvc pipes? We don’t have cpvc in the uk

@5292121

Жыл бұрын

Yes, you can, I believe cpvb makes it easier but you can adapt to what you have at hand.

@zuritodoroki4787

10 ай бұрын

hiiii i have a question, what diameters did you use for the pvc pipes?? (there is not cpvb ones in France either haha)

Hello, do you maybe sell the harnas?

@TiffanyGordonCosplay

10 ай бұрын

See the link in the video description for purchase 😁

@girlmixi

10 ай бұрын

@@TiffanyGordonCosplay tnx i didnt see it at first. i dont really know were to buy the pipes and that link does not work 😅

@girlmixi

10 ай бұрын

@@TiffanyGordonCosplay Also i dont have a 3D printer

How much dod this all cost?

@TiffanyGordonCosplay

3 жыл бұрын

The cost of materials for everything ended up being around $80 for me making it (including shipping costs for fabric materials) and without shipping probably would be more around $60.

@uglycosplays9192

3 жыл бұрын

@@TiffanyGordonCosplay thank you! I really would like to do this and this is a lot less then what I thought!!

What size pvc?

@TiffanyGordonCosplay

9 ай бұрын

1/2in cpvc

Do you sell the ones you make? And if so how much ??

@TiffanyGordonCosplay

3 жыл бұрын

sorry but i do not sell my props or cosplays

Can I pay you to do mine?

@TiffanyGordonCosplay

3 жыл бұрын

Sorry, but I do not do commissions right now

AHHHHH NOOOO WAHT ARE YOU DOING TO THE FUR ?! WHY

@SugaryND

2 жыл бұрын

You know it's not real fur right?

Your husband will be a very lucky man. Choose wisely and I hope you have your "best life" 😃👍

Im shocked there isnt a single furry pfp in this comments section.

"I ended up using my hot water boiler" - a kettle. yes. you used a kettle.