Installation of a captain choice exhaust on a 1995 Sea ray 220 Signature with a 74 454 Big Block
Жүктеу.....
Пікірлер: 77
@whuzak8 жыл бұрын
Dude loved the videos of your restoration project, salute from over in the UK!
@rodeoman4413 жыл бұрын
Great work. Love the project. Love the choice in beer to. Keep it up buddy
@shananagans512 жыл бұрын
I have watched most of your vids & it makes me wonder why those of us that build our own projects really do it. lol As I am planning my next project. The boat is turning out great. I have always wanted to do a boat.
@manbearpig21646 жыл бұрын
You're a badass dude, great job brother
@jasonhunt59138 жыл бұрын
thanks for this video and the others i'll be watching them a few times before I grow the balls to cut the holes.
@dagtoreh8 жыл бұрын
Nice job:) one thing-you Mount the exhaust cover over a sticker.... On caravans i work With the stickers get loose and water Gets in. :) but this Was the best time i have spent on youtube.. Good Bye from norway
@TheDonzidude6 жыл бұрын
I put side exhausts from Hardin Marine on my Donzi Regazza 25. I followed a lot of your instructions and the job went perfectly. For a boat that is rare. Thanks for the video.
@FriscoBoatersGarage
6 жыл бұрын
Glad that it worked out. It was scary cutting the holes.
@TheDonzidude
6 жыл бұрын
The templet was the key. That was a great suggestion. I took my exhaust tips put them on my copy machine and copied the exterior end of the pipe to make my template out of and it worked perfect. It also copied the inside where the exhaust comes out so that made it easier getting the template cut out exactly where it needed to be. And yeah it is scary cutting two big holes in your boat down there the water line. I wish the manufacturers would send templates that would make things a lot easier and quicker.
@immoman113 жыл бұрын
thanks for all these very good vids from germany !!!!!!!!!!!! i wish you a lot of fun on water !!!!
@FriscoBoatersGarage13 жыл бұрын
@Winmacguy No need to remove the manifolds. Just the turn downs after the manifold. Everything was done with the engine in the boat, and was a very easy installation.
@jljr9810 жыл бұрын
after hearing it i might invest in one of these exhausts for my 5.7 1984 cobia cuddy
@YooTooobJeff6 жыл бұрын
Love your funny videos...
@louieaceti15087 жыл бұрын
my rotozip cut through 3/4 plywood, carpet, and fiberglass like butter for a big 10" subwoofer
@FriscoBoatersGarage11 жыл бұрын
It has a diverter for the Corsa system. If you do a straight through exhaust, yes you have to remove the y pipe and block it off.
@Hardcorediver447 жыл бұрын
Get yourself a roto zip for the next time. Makes easy work in 1/3 the time in cutting. And since its high speed, no gelcoat flaking.
@brandonomeara58652 жыл бұрын
As a vinyl guy, his cutting makes my spine twist 😅
@Seaswirl9211 жыл бұрын
I love the sound the thru hull exhaust. I just wish I could do it on my boat, but they don't make a kit for mine. I know theres got to be a way to do it.
@TheJones853310 жыл бұрын
I just subcrbed to your chanel. You are pretty awesme! Thank you so much for all of the help your videos provide!
@barrynoel69086 жыл бұрын
the tape will also help keep from scratching the boat also
@mufuliramark3 жыл бұрын
Best laid plans of mice and men actually.
@jghshield10 жыл бұрын
Great Job!!! Thanks for all the helpful information.. Did you have to modify the out drive water pickup unit and or the through hub exhaust???
@Beachnative427 жыл бұрын
Is that the same POS jig saw I bought at Harbor freight?
@thestigmach19849 жыл бұрын
how is the exhaust originally on your boat? I want to do something similar with mine but my exhaust runs through the outdrive right now. Do you know if I can change that?
@multibasshole8 жыл бұрын
Its best not to have both battery's on the drivers side ,with the drivers weight and the battery"s weight you will have a listing problem. All in all you did a great job reverse building that Sea Ray. I built Sea Ray boats for over 10 years at the Oxford Michigan plant and building on the assembly line was much easier than your project so hats off to you for doing a great job.
@FriscoBoatersGarage
8 жыл бұрын
+multibasshole I ended up not doing that setup, but you are right
@bperry968910 ай бұрын
Rebuilding the exact boat right now. Got a question…. The engine turns over but will not fire to crank. Any ideas??
@Saltyventures2411 жыл бұрын
did you have to block off the hole from the y pipe when you installed the thru hull exhaust? I have an alpha one with a 454 and i want to do thru hull exhaust.
@assynip9 жыл бұрын
Understand the install process as I am going thru the same thing with my 1976 Fiberform ... but, have a question re the wall thickness itself. Was the fiberglas sidewall thickness enough to support the exhaust assy as well as the tubing and tolerate the stresses and strains put on the sides of the boat during operation? Did you consider adding reinforcing on the inside of the sidewall??
@pchansen10013 жыл бұрын
HI Jay. Can you mount the second battery over by the trim pump?
@derekwood398010 жыл бұрын
Hey man, great vids. You are a true boater with that coors light box haha! I have two questions: do you have to replace freeze plugs? And what's the best leave on wax for a clean and long lasting finish? I have a 2001 formula 34 pc.
@stevenlubbers72364 жыл бұрын
Doesn’t the exhaust normally go through the stern drive?
@blakeremillard21912 жыл бұрын
Do have a part number or anything for the diverters you used? I have the same boat and can’t find them anywhere
@jamesunderwood4822 жыл бұрын
Which kit did u purchase?.
@rowmingoat51456 жыл бұрын
When making templates like you are doing get a ballpein hammer and tap the inside. It will cut it out so slick you will never go back doing it any other way
@markjames44746 жыл бұрын
Brave! I could never cut into my boat....
@shanesanko14082 жыл бұрын
I'm just scrolling through some videos I don't know if you know now but they have jigsaw blades with reverse teeth that are for cutting formica and counter tops which also can be used on fiberglass, and they will not chip the surface of what you're cutting but you probably figured that out I'm sure
@richardlewis82037 жыл бұрын
Nylocs, on an exhaust?
@eddiecook51765 жыл бұрын
downward facing teeth in the jigsaw make a neat job on the surface, just saying.
@josecrespinmediashack89738 жыл бұрын
his boat is cool
@Lmidden211 жыл бұрын
on my boat we have a battery on each side with a switch to select battery 1 or 2 or both
@semmes53426 жыл бұрын
YOU DONT HAVE DUAL BATTERIES?
@McCracken_94 жыл бұрын
This takes balls.
@PatrickBialek11 жыл бұрын
thanks
@patrickseyer31823 жыл бұрын
Why doesn’t it come with a template
@busterbrown854312 жыл бұрын
We have been watching almost all of your videos and love the work that you have done. The Corsa exhaust looks great! We have been looking to get the same Corsa exhaust that you have, but we haven't had that much luck. We were wondering where you got your system and how you ordered it. Thanks
@karlwooduk6 жыл бұрын
hindsight is 20/20 right?
@rcaldwell197310 жыл бұрын
What motor do you have and where did you order the corsa exhaust from? thanks
@rcaldwell1973
10 жыл бұрын
Lol didn't read the description
@eskileriksson44575 жыл бұрын
The best-laid plans of mice and men often go awry.
@MisterJoeRockhead2 жыл бұрын
Why didnt you use a hole saw? Did I miss something
@youtubertoo
10 ай бұрын
Yes
@biggboyzconceptz12497 жыл бұрын
Build a stackable battery bank
@FriscoBoatersGarage12 жыл бұрын
I went straight to corsa and talked to Jim.
@tonychunapongse2037
5 жыл бұрын
Nice boat and so perform work thanks for VDO good job by away where i can get order buy Exhaust to side of rear boat ?, my boat engine is OMC 4.3 V6 Thanks for you VDO so fun to watch it. Thanks Tony from LA, CA
@ODCDragon886 жыл бұрын
Invest in an Oscillating tool...Well worth the money and will quickly become your #1 cutting tool. @15:50 I notice it appears that you cut your opening a little to much and had no haul to bolt through but rather barley grabbed. Not being nit picky (ok I am) but after the phenomenal and professional job you did with the floor rot project I was a little let down here. They look and sound great think maybe you rushed the project and now have to live with the minor mistakes......
@karlwooduk6 жыл бұрын
shouldve fabricated a battery cage so you can stack the batteries 1 on top of the other
@TheGarywilliams2 жыл бұрын
All I have is MT Dew boxes , so I guess it won't work for my boat. 😃
@chrisask20654 жыл бұрын
Black and decker boat wrecker
@damnskippyify6 жыл бұрын
Don't know if you still get these comments . Next time get a small ball peen hammer and with the ball end tap that inside of the circle opening and as you do that it will cut he cardboard just a slick as willie and that sir is how you make gaskets for anything odd shaped . you then take the cardboard to the cork gasket material and trace it out . Thank you . Small ball peen ..
@josepeixoto3384
5 жыл бұрын
It must be a VERY small hammer; or a (~~1/2") drill bit,a steel rod,a wrench,a ratchet, etc
@jamesduckettDR2 жыл бұрын
Wait! You didn't start it!
@MenCanNotBeWomen6 жыл бұрын
i sure hope to god you ground out some wood from the inside of that hole you cut out, and filled it with resin. or Epoxy Fairing Powder , once water enters between glass, it delams and all that work gone to waste
@thomasthornton5889
5 жыл бұрын
Judge Dredd m
@orchid92wateradventurecomp55 жыл бұрын
SIR BACK GROUND VOICE SO BALDLY IN UR ALL VIDEOS SO PLS CLEAR VOICE BACK GROUND PLS
@chrisask20654 жыл бұрын
A cutting torch would have been a lot quicker to do that.... and when I say “do that” I mean “ruin that”
@mikelyons75116 жыл бұрын
Hack tack an wack
@chrisask20654 жыл бұрын
You should have listened to your daughter when she asked you if it would be deep enough
@maineoutdoorsman6775 жыл бұрын
Get ur self a hole cuter they make stuff to cut holes u know ur not the first man to have to cut a ⭕️
@damnskippyify6 жыл бұрын
I have installed more than a few captains call , Have you ever heard of a hole saw I would suggest you invest in a few . And why the hell you would come out the sides other than out the rear is besides me . I think that you go out of the way to make things more difficult for no other reason then to have over thought shit so much it now becomes a cluster fuck . What benefits people doing restorations is experience to not go down some of the wrong roads you have traveled . I think its great for you to experiment on your boat . that being said I think you thinking that you are teaching someone something is a falsehood .. I promise you that if a person goes through the transom and uses the proper sealant you will not have transom rot . What about your though transom gimbal housing did you not cut a large hole in your transom . Like a said you make things harder than they need to be . why install a captains call to begin with so that the engine performs better . No ! So it sounds cool Yes . Just as think all this talk you do sounds cool when if you knew what you were doing to begin with the boat would have been done months ago . Instead you want to teach people all the mistakes . Teach them the correct way the first time
@Roosters_Restos Жыл бұрын
I just found out these are illegal in minnesota. Just after I bought on for my kid. So now I am stuck with it. Also found out that it's illegal to even sell one here. Wtf is wrong with this stupid state. Oh democrats😅
Пікірлер: 77
Dude loved the videos of your restoration project, salute from over in the UK!
Great work. Love the project. Love the choice in beer to. Keep it up buddy
I have watched most of your vids & it makes me wonder why those of us that build our own projects really do it. lol As I am planning my next project. The boat is turning out great. I have always wanted to do a boat.
You're a badass dude, great job brother
thanks for this video and the others i'll be watching them a few times before I grow the balls to cut the holes.
Nice job:) one thing-you Mount the exhaust cover over a sticker.... On caravans i work With the stickers get loose and water Gets in. :) but this Was the best time i have spent on youtube.. Good Bye from norway
I put side exhausts from Hardin Marine on my Donzi Regazza 25. I followed a lot of your instructions and the job went perfectly. For a boat that is rare. Thanks for the video.
@FriscoBoatersGarage
6 жыл бұрын
Glad that it worked out. It was scary cutting the holes.
@TheDonzidude
6 жыл бұрын
The templet was the key. That was a great suggestion. I took my exhaust tips put them on my copy machine and copied the exterior end of the pipe to make my template out of and it worked perfect. It also copied the inside where the exhaust comes out so that made it easier getting the template cut out exactly where it needed to be. And yeah it is scary cutting two big holes in your boat down there the water line. I wish the manufacturers would send templates that would make things a lot easier and quicker.
thanks for all these very good vids from germany !!!!!!!!!!!! i wish you a lot of fun on water !!!!
@Winmacguy No need to remove the manifolds. Just the turn downs after the manifold. Everything was done with the engine in the boat, and was a very easy installation.
after hearing it i might invest in one of these exhausts for my 5.7 1984 cobia cuddy
Love your funny videos...
my rotozip cut through 3/4 plywood, carpet, and fiberglass like butter for a big 10" subwoofer
It has a diverter for the Corsa system. If you do a straight through exhaust, yes you have to remove the y pipe and block it off.
Get yourself a roto zip for the next time. Makes easy work in 1/3 the time in cutting. And since its high speed, no gelcoat flaking.
As a vinyl guy, his cutting makes my spine twist 😅
I love the sound the thru hull exhaust. I just wish I could do it on my boat, but they don't make a kit for mine. I know theres got to be a way to do it.
I just subcrbed to your chanel. You are pretty awesme! Thank you so much for all of the help your videos provide!
the tape will also help keep from scratching the boat also
Best laid plans of mice and men actually.
Great Job!!! Thanks for all the helpful information.. Did you have to modify the out drive water pickup unit and or the through hub exhaust???
Is that the same POS jig saw I bought at Harbor freight?
how is the exhaust originally on your boat? I want to do something similar with mine but my exhaust runs through the outdrive right now. Do you know if I can change that?
Its best not to have both battery's on the drivers side ,with the drivers weight and the battery"s weight you will have a listing problem. All in all you did a great job reverse building that Sea Ray. I built Sea Ray boats for over 10 years at the Oxford Michigan plant and building on the assembly line was much easier than your project so hats off to you for doing a great job.
@FriscoBoatersGarage
8 жыл бұрын
+multibasshole I ended up not doing that setup, but you are right
Rebuilding the exact boat right now. Got a question…. The engine turns over but will not fire to crank. Any ideas??
did you have to block off the hole from the y pipe when you installed the thru hull exhaust? I have an alpha one with a 454 and i want to do thru hull exhaust.
Understand the install process as I am going thru the same thing with my 1976 Fiberform ... but, have a question re the wall thickness itself. Was the fiberglas sidewall thickness enough to support the exhaust assy as well as the tubing and tolerate the stresses and strains put on the sides of the boat during operation? Did you consider adding reinforcing on the inside of the sidewall??
HI Jay. Can you mount the second battery over by the trim pump?
Hey man, great vids. You are a true boater with that coors light box haha! I have two questions: do you have to replace freeze plugs? And what's the best leave on wax for a clean and long lasting finish? I have a 2001 formula 34 pc.
Doesn’t the exhaust normally go through the stern drive?
Do have a part number or anything for the diverters you used? I have the same boat and can’t find them anywhere
Which kit did u purchase?.
When making templates like you are doing get a ballpein hammer and tap the inside. It will cut it out so slick you will never go back doing it any other way
Brave! I could never cut into my boat....
I'm just scrolling through some videos I don't know if you know now but they have jigsaw blades with reverse teeth that are for cutting formica and counter tops which also can be used on fiberglass, and they will not chip the surface of what you're cutting but you probably figured that out I'm sure
Nylocs, on an exhaust?
downward facing teeth in the jigsaw make a neat job on the surface, just saying.
his boat is cool
on my boat we have a battery on each side with a switch to select battery 1 or 2 or both
YOU DONT HAVE DUAL BATTERIES?
This takes balls.
thanks
Why doesn’t it come with a template
We have been watching almost all of your videos and love the work that you have done. The Corsa exhaust looks great! We have been looking to get the same Corsa exhaust that you have, but we haven't had that much luck. We were wondering where you got your system and how you ordered it. Thanks
hindsight is 20/20 right?
What motor do you have and where did you order the corsa exhaust from? thanks
@rcaldwell1973
10 жыл бұрын
Lol didn't read the description
The best-laid plans of mice and men often go awry.
Why didnt you use a hole saw? Did I miss something
@youtubertoo
10 ай бұрын
Yes
Build a stackable battery bank
I went straight to corsa and talked to Jim.
@tonychunapongse2037
5 жыл бұрын
Nice boat and so perform work thanks for VDO good job by away where i can get order buy Exhaust to side of rear boat ?, my boat engine is OMC 4.3 V6 Thanks for you VDO so fun to watch it. Thanks Tony from LA, CA
Invest in an Oscillating tool...Well worth the money and will quickly become your #1 cutting tool. @15:50 I notice it appears that you cut your opening a little to much and had no haul to bolt through but rather barley grabbed. Not being nit picky (ok I am) but after the phenomenal and professional job you did with the floor rot project I was a little let down here. They look and sound great think maybe you rushed the project and now have to live with the minor mistakes......
shouldve fabricated a battery cage so you can stack the batteries 1 on top of the other
All I have is MT Dew boxes , so I guess it won't work for my boat. 😃
Black and decker boat wrecker
Don't know if you still get these comments . Next time get a small ball peen hammer and with the ball end tap that inside of the circle opening and as you do that it will cut he cardboard just a slick as willie and that sir is how you make gaskets for anything odd shaped . you then take the cardboard to the cork gasket material and trace it out . Thank you . Small ball peen ..
@josepeixoto3384
5 жыл бұрын
It must be a VERY small hammer; or a (~~1/2") drill bit,a steel rod,a wrench,a ratchet, etc
Wait! You didn't start it!
i sure hope to god you ground out some wood from the inside of that hole you cut out, and filled it with resin. or Epoxy Fairing Powder , once water enters between glass, it delams and all that work gone to waste
@thomasthornton5889
5 жыл бұрын
Judge Dredd m
SIR BACK GROUND VOICE SO BALDLY IN UR ALL VIDEOS SO PLS CLEAR VOICE BACK GROUND PLS
A cutting torch would have been a lot quicker to do that.... and when I say “do that” I mean “ruin that”
Hack tack an wack
You should have listened to your daughter when she asked you if it would be deep enough
Get ur self a hole cuter they make stuff to cut holes u know ur not the first man to have to cut a ⭕️
I have installed more than a few captains call , Have you ever heard of a hole saw I would suggest you invest in a few . And why the hell you would come out the sides other than out the rear is besides me . I think that you go out of the way to make things more difficult for no other reason then to have over thought shit so much it now becomes a cluster fuck . What benefits people doing restorations is experience to not go down some of the wrong roads you have traveled . I think its great for you to experiment on your boat . that being said I think you thinking that you are teaching someone something is a falsehood .. I promise you that if a person goes through the transom and uses the proper sealant you will not have transom rot . What about your though transom gimbal housing did you not cut a large hole in your transom . Like a said you make things harder than they need to be . why install a captains call to begin with so that the engine performs better . No ! So it sounds cool Yes . Just as think all this talk you do sounds cool when if you knew what you were doing to begin with the boat would have been done months ago . Instead you want to teach people all the mistakes . Teach them the correct way the first time
I just found out these are illegal in minnesota. Just after I bought on for my kid. So now I am stuck with it. Also found out that it's illegal to even sell one here. Wtf is wrong with this stupid state. Oh democrats😅