Been doing this since the first time I heard about it on a shaving channel 2 years ago. It absolutely improves the feel of any blade. Keep up the good work 👍

Only reason that I cork a blade is to wipe off water hardness and soap film after a shave later when the blade is dry, AFTER whatever small number of shaves which have left those deposits. I cork wipe the blade ONE time only for each corking task; never more than one wipe at a time. CAREFUL: Be very careful when corking blade to avoid cutting your fingers.

Shaving Voodoo 😉

Love the video!! I’m totally into wetshaving to and started doing my own videos too!

@brownbaggentleman7509

4 ай бұрын

Just subscribed to you.

Might consider running on a strop, just plain leather.....it would remove better the burr and align the edge- that cork might dull it a little and certainly will missalign the edge, the razor edge is much finer than any other cutting tool ( knife)

Never done this before, but I am going to test it. My gut feeling says that it will dull the blade?

@theodorepapadopoulos810

3 ай бұрын

It doesn't. It seems to take the micro-jagged edge off. maybe it's placebo 🤣 .....but I can swear there's a big feel difference.

@10floz30minutes

Ай бұрын

Probably does, but my impression is that the dulling is not significant. I have obtained 13 to 14 shaves on a few Feather Hi-Stainless blades; only corking as pre-treatment for number 4 shave through number ~14 shave. (So many people claim to not be able to do more than four shaves on a Feather blade.)

@10floz30minutes

Ай бұрын

I do not see my reply here. I tried to say, any dulling is not significant, and that I get up to 14 shaves on a Feather blade, and use corking after shave number 3.

That will just dull the blade, especially in a non coated blade.... I tried this method on a coated Russian blade that I thought lacked QC.....but that one was bad before and bad after the cork..... never used those again. Now to Feather....I like them new and up to 3 uses, after that they cause weepers probably the edge is chipped?

@10floz30minutes

Ай бұрын

Some of us, maybe few of us, have been very lucky with Feather Hi-Stainless d.e. blades. Even WITH corking before most shaves, I have done about 13 or 14 shaves on a blade. Very little if any skin cuts or irritation (often very light irritation).

Update? How did the corking affect your shaves? I like your choice of a cork with a wooden top to it -- looks like it makes it easier to not cut yourself and the cork won't roll off the shelf or counter.

@brownbaggentleman7509

6 ай бұрын

I found 3 swipes is better than five. It is enough to debut the blade a bit without making it too dull. May try only 2 swipes next time.

@gsp0113

6 ай бұрын

@@brownbaggentleman7509 Very interesting; thanks. I'll definitely be giving this a try in the coming week. I've already managed to get a cork with a top like yours from an empty bottle of Macallan. Based on your comment, I'll try 2 swipes, one in each direction.

@gsp0113

6 ай бұрын

@@brownbaggentleman7509 Update: By the way, I thought I'd let you know that Mantic59, a wet shaving enthusiast, has a KZread video on corking razor blades. In it, he states that the blade should be run through the cork only once. So your observation that more passes are not better is accurate. Apparently, any more than one pass through the cork doesn't do any additional deburring, but does dull the blade. I'd love to see you do a second video trying one pass. (Haven't yet tried it myself, but will soon.)

@10floz30minutes

Ай бұрын

@@brownbaggentleman7509 Just "swipe" one time for each edge. That's all I do. You can then do this again before the next shave or the shave after that.

@10floz30minutes

Ай бұрын

@@gsp0113 I DO BELIEVE THIS!

Maybe you could try a milder blade instead of doing that? Just a thought, but the video is interesting regardless 👍