Made the mistake of not burping my system properly after replacing radiator yesterday...pulled over before coolant hit 225 degrees...took a tow home so I didn’t need an engine replacement lol

@fishing_enc3343

4 жыл бұрын

Wow! I'm sorry to hear that ! That funnel kit I used in this video is really helpful with getting the air out because of how it locks into the top of the radiator and allows fluid to sit in the top of the funnel while the vehicle is on you'll see it actually "burp" itself! Hope my video helps you get your vehicle back in working order !

@brevinainslie6357

4 жыл бұрын

Fishing_ ENC it did, I bought the funnel the next day after watching your video. Took 20 mins thanks for the video

@fishing_enc3343

4 жыл бұрын

@@brevinainslie6357 Awesome! No problem!

Shouldn’t you use Mopar Hoat coolant in your 2005 Dakota which is orange/pink in color?

@fishing_enc3343

4 жыл бұрын

The coolant I used in this video is Mopar hoat (or oat), Organic Acid Technology, it states it on the back side of the coolant container. Its definitely pink in color, I think in my video I said its red but that statement was not correct.

You also needed to drain the engine block of coolant and distilled water. After your flush, there was still a ton of distilled water in the block and heater lines such that when you drained it and added 50/50 mix, you would have diluted it significantly more because of all the undrained water that was till in the system.

@fishing_enc3343

4 жыл бұрын

I repeated the cycling that water 3 times if I remember right and then added the coolant while the truck was running until it stopped taking in the fluid. Nobody takes the time to drain their whole engine block anyway 😂😂

@fishing_enc3343

4 жыл бұрын

I also put in the description that video is just for the coolant reservoir and radiator

@letterman01

4 жыл бұрын

@@fishing_enc3343I get. I appreciate the video. The block and heater lines are connected to the radiator and reservoir. The reason I watched was to see either how you accessed the block drains or adjusted or adjusted the mix ratio for the water that was still inside there.

@kurtlindstrom4218

2 жыл бұрын

So all conne ting tubes other than the "large diameter rubber hose" ne3d to be disconnected BEFORE starting the process?

Hey fishing Inc What is that lil coolant radiator in front of ur radiator for

@fishing_enc3343

2 жыл бұрын

That's my radiator

@thaAzian1401

2 жыл бұрын

@@fishing_enc3343 Do u have an electric fan in ur truck besides tha fan clutch

@fishing_enc3343

2 жыл бұрын

@@thaAzian1401 Not that I'm aware of