Converting An Old School BMX Into A New School Bike!
Ойын-сауық
Make sure to check out ridge.com/alfredomancuso to get yourself one of the sleekest, and safest wallets on the internet!
In today's video, Phu converts a 1989 GT Performer frame, fork and stem, with all modern day BMX parts off of Max Vu's 2021 Cult Custom Complete pro level bike.
#oldschool #conversion #newschool
Converting An Old School BMX Into A New School Bike!
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
If you'd like to support me:
For merch visit: www.AlfredoMancuso.com
onlyfans.com/alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Snapchat: AlfredoMancuso
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
If you'd like to support me:
For merch visit: www.AlfredoMancuso.com
onlyfans.com/alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Snapchat: AlfredoMancuso
Пікірлер: 256
Hit ridge.com/alfredomancuso to support your boy, and get my favorite wallet of all time! (I got the 18k gold one...in case you were wondering)
@JNAMOTORSPORTS
2 жыл бұрын
What freecoaster is that? And what front hub?
@JNAMOTORSPORTS
2 жыл бұрын
2.25 or a slimmer 2.3 might work But definitely 2.25 would work perfectly
@jasonlopez4855
Жыл бұрын
Isn't your mallet a dead blow mallets are solid rubber with no lead shot in it. Just saying 😉
This has been on my mind. So many old/mid school frames out there just begging to be freshened up with new stuff. I’m in the process of doing this with my 01 beswick pro. Great vid brother 👍🏼
@svgglockii2592
Жыл бұрын
I had a 2003 Haro nyquist pro I took restored painted and put new school bmx parts on it now I swear every time I go to the skatepark I got the sickest bike there gets hella compliments
I would rather have the gt with Max’s parts on it then Max’s frame
Love these old school new school videos! They are teaching me a lot about new school stuff. Thanks for for these videos
I had the same GT Performer when I was a kid in 1997! Pretty much same color mine was just a little darker. Had white 5 point star mags. Got it mint for only $40 at a flea market. I loved that bike!
Phu, don't be afraid to fit a 1 1/8" fork in a old school frame. That works!, I brought back to life a haro sport 92, using an odissey fork. I didn't machine cups (which would be great, maybe next time ).
@andresgaviria9559
Жыл бұрын
@Flatt Bratts Hi mate, I kept the cups (old tioga) into the haro sport frame. Then, I bought a standard 1 1/8 FSA headsets and 3/32 small steel balls (more than a dozen). I put the race, cover cups and washers from the FSA headset into the fork. Just add steel balls in order to avoid some loose in your set up. Hope that helps to you.
Coolest bike shop ever, and the owner is a solid dude. This was a great video. 👍 Too many people try to create old school "museum" bikes, which doesn't make any sense to me. I have a Redline RL 20 and recently put on new Shimano PD-GR500 pedals that are light years better than the Shimano DX pedals from decades ago (which sell on ebay for a fortune). Bikes are meant to be upgraded and customized. In the early days of freestyle no one kept the bike as sold from the store, and most often just bought the frame and fork alone. Cranks were always upgraded, pedals were always upgraded, stem, bars, gripss, etc. The point is, freestyle bikes should be ridden, not sitting in a corner on a stand looking like a magazine ad depicting a bike no one actually rode. Don't get hung up on "era correct" parts, and most importantly, actually ride the bike 👍
@mahazda351
Жыл бұрын
Every bike has its place, if it’s over 10 years old and in great condition you should probably do your part in preserving the history, otherwise yea an older bike with some small issues I’d modernize all day
7:56 “how about a day where you gotta wear pants” lmaooo😂😂😂
@MorbidThrasher666
2 жыл бұрын
and shoes
I've been looking for an original OG GT Performer frame and fork combo for the longest time for a retro modern project for the longest time. Glad this video confirmed it is indeed possible. Thanks ManFredo & Pepe Le Phu!😀
@shaunreed8115
2 жыл бұрын
Look on Facebook marketplace a dude has one but it's pricey mint condition though
That was my dream bike back in the day! Cool to see it updated. Thanks for the awesome content guys!
If I had to do this, maybe a 2.25 tires and 36t sprocket would be a good combo and look for that frame.
Awesome video! I’ve been wanting to restore my brothers old 87 GT Freestyle with modern parts. You definitely inspired me to finally do it
Great video! I have that exact same frame hanging on my wall, I might have to build it now...
@AlfredoMancuso
2 жыл бұрын
I’d say so!!
Blasphemy! Lol. Just because you can doesn't mean you should. Great video guys.
@AlfredoMancuso
2 жыл бұрын
Hahaha agreeed!!
@rickybobby5950
2 жыл бұрын
I’m old school and just hate the way small gears look. I’m doing a build on a mid-school XXL aluminum race frame for a lightweight neighborhood putt and was just looking at a 44/16 with a sealed freewheel classic combo or a 25/9 cassette to modernize it but I think the larger frame would look silly with the tiny little gears. I’m also a bigger guy (6’-1", 200lbs) so I think the extra points of engagement and distribution of load would be better with the larger combo. I don’t mind keeping a spare freewheel handy just I case a break one. I mostly just ride the local trails and just want something that is fun to ride and light enough to let an old guy get a little air now and then and I think the old school setup works better for my needs and preferences. I may try a 25/9 at some point, just not this build.
When I used to live in México my first BMX was a standard fork and American Bottom Bracket and yeah, most of the parts I modded and changed to stronger and better parts like a 14mm rear hub and another stuff, except for my fork I kept using a Standard Fork but I found a brand new Primo Casket Stem for like 5 dollars which is like 100 pesos, great build imo so yeah, it’s safe to say that y’all can do this with mostly no issues like this guys did
Great video. Wish I would have seen it before I bought all new parts for my mid 90s Haro Shredder. I ran into the same compatibility issues you mentioned. My original fork has a 1" steer tube and the new stem was made for 1-1/8". Also new wheel I bought has a 14mm axle. I'm in the process of cutting, drilling, and tapping it for 3/8" bolts. Keep up the good work!
I'm working on my 87' Haro Master! I'm glad to hear that others are breakin from the norm and adding new parts to an old frame! It's My bike and I can do what I want!!!!
This old to new school content you been putting out lately has been making me really feel my age. I still love it!
Do a wheel build with Ethan, it looks like he uses the correct method.
@AlfredoMancuso
2 жыл бұрын
Hahaha different stroked for different folks
@VailSkateSupply1
2 жыл бұрын
Yeah but those orange hubs with white spokes are fire!
Love it! I've been doing this with 60's and 70's 20" muscle bikes lately. Huffy Rails and Schwinn Stingray style frames. I love mixing the banana bike and BMX stuff together.
I’ve been doing this with my old school bikes for some time now and thinks it’s great
You can mix 1 inch headset cups with 1 1/8” cones and freeball the ball bearings with no race. I’ve done it putting 1 1/8” thread less forks on a 1” 1970’s mongoose frame several times. A little tricky but works fine. Bless up fellas
Phu man you and Alf are awesome, you two and your crew do a lot for our industry……. Long live BMX !!!
@AlfredoMancuso
2 жыл бұрын
Genuinely means a lot! Thanks Skylar!
Did this on my friends old skool free agent with newer parts and it came out really good it's one of his favorite bikes
another great vid loved it. wish i still had my old bmx's from when i was a kid. keep up the great work fellas
I'm an 80's freestyle rider and I definitely can appreciate this video!
@adamcoleman1369
2 жыл бұрын
I’m restoring a 1983 diamondback viper aba no1 I think it’s such a cool bike
@phillipcrook8336
Жыл бұрын
I have a (1980s)condor freestyle comp 20. Perchance would you happen to know what year the bike would be?
@bigben1986
Жыл бұрын
@@adamcoleman1369 That will be an awesome build!!!
@bigben1986
Жыл бұрын
@@phillipcrook8336 turn your bike upside down and where the crank arms would go there should be serial numbers. I believe the last 2 numbers are the year.
Us old school bmxers like our brakes though.
Thanks phu for the video. Back in the day I used to run my goose neck all the way down for the stability.
thats dope Learned something new today i dont even BMX. Thank goodness they finished the bike looks good.
I’ve been doing this for that last 10 years I’m 21 and I love these old bikes I have a few old redlines and gts dynos that have been updated
Will a Shadow Supreme chain fit on an old school bike with a 44 tooth sprocket up front, and a 16 tooth rear sprocket? I'm afraid the chain will be too short.
I want to build my '00 DK General Lee with modern parts. Problem areas were bottom bracket and headset. But i got some cool tips from you guys!
@Patrick_Andrews917
2 жыл бұрын
It would use an American size bottom bracket and a headset conversion like the Mission Conversion headset that Phu mentioned in the earlier video, I believe. Hope that helps some too 🙂
Funny thing is you can actually use the top and bottom racer from the fork to convert to Threadless. Sometimes you will luck out and be able to use the bottom race.. but all you have to do is gringo the threads out of the upper race. It will slide over the Threadless fork, and just use the rest of the hardware as usual. The forks will have about 3/32" of room to spin..it's tight but it will work 100%
Subscribed!! Man, I love these videos.
Such wholesome characters in this film
Great Video Phu it's fun watching you guys build stuff up. It would be cool to see you guys talk more about the old school frames. A video comparing geometry from back then to today's bikes would be really cool to see.
I love what you guys are doing with these Informative videos. I think a lot of the KZread BMX channels get lost in a lot of other silly stuff. Like the trendy you tube stuff. But I’m digging what you guys are doing. I think it would be so cool to do a BMX shop makeover. Reorganize and give your shop some new light. I think that would make a awesome video. Everybody helping to re-organize. Anyways keep the videos coming. Best ☝️
@AlfredoMancuso
2 жыл бұрын
Thanks for the kind words! A shop reorganization would be amazing!
I've found that old head tubes can fit new steer tubes if you change the bearing couplings.
I need a shop like yours and dudes like you near me in Westminster Colorado ! Thank you for being so good !
Awesome video!! I gave my son my 1998 Diamondback Viper. Hes been learning the ropes and looking to do new style changes to it.😎😎
You had me at old school 😂 ! Keep the bmx love alive 🤙🏻
My man! I really appreciate this video. I'm 51 years old and have decided to bring my early 90s GT back to life. I want to do my 84 Haro Sport when I get done with the GT. Your videos are very helpful.
@michaeldenis7010
Жыл бұрын
So funny, also 51 and doing the same to my 90 Gt Pft 😂
@JEanes
Жыл бұрын
@@michaeldenis7010 that's cool man!
BMW Shinburgers...loved mine BITD. GREAT video fellas, fun.
Pepi Le pew was lit lol 😂🤣
I had 2) of those performers back in the day…that same pink one and the white one…..along with a few mach ones that had that dyno stem just with the gt logo and 2.25 front tire and 1.75 rear ….man i miss them bikes
That bike looks SICK AF
The more I look at it the more I kinda like it.
@AlfredoMancuso
Жыл бұрын
Not a bad looking bike
Did mine last week, upgraded my old bike with latest parts
that thing looks amazing modernised
I have a 2000 performer It has a OPC i noticed the sprocket moves side to side, got a new procket 44t installed still moves side to side. I have noticed neither sprocket sit flush to the arm and the back of the pin, when tightened down its flush at the bb but not flush on the pin. Cud this be bearings, or poss bent Crank?
Okay, I have thought about doing these type of things for a while. I had an idea for the 1" headtube and fork issue and I'd like to know what you guys would think: there are 1" headtube BMX racing parts and frames out there. So, I thought about getting a 1" standard style headset, with 1" Threadless forks, and a 1" stem to convert the front end completely to Threadless without changing bearing size or using a gooseneck or any wedge parts at all. Great video as always!!
I have a problem with my chain hitting the frame of my bike and there is marks in my frame from where the chain has been hitting at. The sprocket is 40/36T and the freewheel is 18T on a mid school bmx that is 20”x21”. What do I need to do to fix the chain from hitting the frame.
Eddie Bravo sure knows a lot about bikes.
Im actually converting a Schwinn Predator Comp Le right now for my son....Great video..the only down side is that it will be a hassle to go to a 14mm axle setup being that all the newschool set ups are on a casette drive.
Phu's sarcasm.. The gigantic sprocket, he called it a dinner plate 🍽️! 😂 Good video
Been doing this for a while now. Awesome job. I would have used the original sprocket tho. I get what you were doing though. Tire wise 2.3 works great for me not to many issues. Awesome
I have a old school bike and I have been doing the same thing and I just got a new crank but what part do I have to buy to be able to put it on?
Iv done this with my midskool eastern jane it runs a 25t sprocket with a semi sealed bb bearing setup and as its chainstay brakeing it works well theres also a modern wheelset with a 9t driver its lightened it up a bit too and is more rideable i did the same to my old holmes and it rode luverly 🤘
Chain tensioner on rear are great.3/8" pegs on rear and front.
Did this to an old DK frame, except I did a custom powdercoat on it. Nothing wrong with old frames!
I’d like to see Phu ride bike in the videos, you guys should do a ride around town, with Ethan, Max, Phu, Alfredo, and whoever else is around.
@johnnypoo3166
2 жыл бұрын
yes i agree a "Epic Ride Around" would be nice!
@Rileys_dad
2 жыл бұрын
@@johnnypoo3166 do it!
Yeah I'm trying to figure out how I can open up the mounts on my rear wheel from a 3/8" axle to accept a 14mm axel I want this new KHE 9T cassette hub instead of the old skool 16T cog I got a new 3 piece crank with sealed bearings and the upgraded cups to drop the old one piece crank and ball bearing sets its turned out awesome. I want the 9T driver to fit on my old ass rolds royce union. It's totally doable. I'm about to take either a file or a grinder to the mounts and yeah my 2.35 tires just barely squeeze in my old skool frame
It's exactly what I'm doing. Doing it with what I got. Shred regardless. Thanks y'all.
Is that spintech complete and for sale? I had one on my rl20ii and can't find a decent one for the one I built a few years back.
I have an 88 GT Vertigo frame and would like to know what new school parts are compatible with it. Don’t have the fork either.
Oh sure, just come out with this video now that all my old school frames are gone! I'm just kidding, but I am glad to have seen this, and my gears are grinding! Now I need to come up with a spectacular build, have a great night. Wes Sept
THIS IS WHAT IVE BEEN LOOKING FOR, FOR YEARS
That's was dope asf never thought about doing anything like that
Hey brother I just subscribed and love the content . I have a question, I’m 50 yrs old and just picked up a se racing str-1 . My question is what type of gyro set up do I need for this bike? It has a tange dx4 1 -1/8 thread less headset . Hope you can help an old man out . Thanks
i saw the title and thought you meant like geometry wise... like you were gonna put on an angle set and like machine the dropouts to make the bank end shorter or whatever. but now that I see that chainstay bridge, you probably couldnt shorten it enough.
What was that size you needed for that stem 21.2, where can I get that?
Alfredo, I have a 97 GT intercepter. I am confused on the size forks and headset I need. I have bought and returned to many times now. Help please
Niceeeeee. You answered all my questions. Now I can just update my goose. Nice!
So i still have my 09 TRL1 , i need a new rear wheel but mounting bolts are way bigger than they are now
I need that GT five dimple stem!
Thank you. This helped me. Question, do you think clearances would be the same for a 1999/2000 Dyno Compe? I picked up some mags with 2.4" tires for use on a 1999/2000 Compe. I'm wondering if clearances would have changed slightly
@420jacksonian
2 жыл бұрын
webco mags ?
@mikeboss416
2 жыл бұрын
@@420jacksonian honestly I'm not sure
How did you put a LHD freecoaster the "right" way into the new place?
Wow I didn't expect this vid so soon.
Brooklyn Machine works SHINBURGERS 👍
How did I bend my bottom bracket on my so cal flyer
Couldnt you put the black forks on with the new stem and bars??
Epic ! I think I got those same Primos ha ha !! thanks for posting
Thats sweet as heck 🦾
Yesss i've been waiting for this shoutout to phu
@AlfredoMancuso
2 жыл бұрын
🙌🏻🙌🏻
I stopped using a crescent wrench start a stripping out parts only wrenches and sockets for me now.
I know I never comment but I always watch. I love these videos. Big fan of Phu.
@AlfredoMancuso
2 жыл бұрын
Really appreciate that Joel!
@Jowell168
2 жыл бұрын
@@AlfredoMancuso Big fan of you too of course. Pretty stoaked you replied.
Definitely grabbing a signature Max stem though.
Love your content. Is it possible to build a old school BMX track and give use pointers how to do it are selves.
Phu wants finesse and Alf wants fin-esh jajaja Keep the vids coming!
Done this with a Haro sport it was cool 😎
First love the channel.. always great content. Any idea how to switch a 14mm male axle to a 14mm female axke with 3/8 bolts to ve able to use a modern rim on a 3/8 old school drop out?
I would love to work in that bike shop!
I hope you respond, I have a Robinson seat post(rail) and want to put a pivotal seat on it what do I need? Can you send me a link to an adapter.
I need one of those stem conversion pieces
Yo That build looks SEXY! ! ! 👀 This is proof that you don't need a modern frame to start shredding.
Great Idea's Keep Em Coming
@AlfredoMancuso
2 жыл бұрын
🙏🏻🙏🏻
What did you use for a bb?
Maybe i missed it, but does anybody know the size of the pivital seat post?
Old man bike, cheeky bastard 🤣 gimme an oldschool bike over something modern any day 👌
Thats a bad ass bike bruh !!!