Will this work on a Monument 14633 Grill two burner?

my coleman revolution wont light ignition switch is working and gas is coming in only way i can light if i blowthe gas down to the egnition spark

So I lost those nozzles and I need to change it back to propane cause I moved, can't seem to find new ones anywhere. Any ideas?

Aren’t you supposed to install now orifices?

Thank you. Helped me a lot!

My regulator is stuck and won’t come off

For the Master Chef Grill Turismo; is there supposed to be a Switch Screw on the Booster burner? I can't find one on my BBQ.

@MohammedAlhadi1979

5 жыл бұрын

Frenchy032768 what is the answer?

@kylegibbard

3 жыл бұрын

There is a switch screw underneath of the control cap. Similar to the other burners.

I am trying to convert a gyro or shawarma grill, do you have videos for that thanks

@kylegibbard

3 жыл бұрын

You would need to check with the manufacturer of your grill to see if it is convertible. The design is vastly different when converting.

Thanks Just bought this BBQ want to use summer NG Winter LP

@jimdent351

2 жыл бұрын

Strange question but why do you wish to switch between the 2 fuel sources?

Wait you dont need to add the office for NG

@kylegibbard

3 жыл бұрын

Propane Gas is at a higher pressure than Natural Gas. The orifice helps regulates the flow of propane so it doesn't blow apart your BBQ. When removed it allows the lower pressure Natural Gas to flow correctly.

@fixitfelix718

3 жыл бұрын

@@kylegibbard yes but swaping to larger orface instead of removing entirely. Wouldn't un restricted gas also now shoot into burner as well the venturi effect i believe

@CorbinBroad

3 жыл бұрын

@convertible valve system can you address this point? while there aren’t NG orifices included in the pack (and no mention of them when reassembling burners) it would be nice to have it explicitly stated that they are no longer needed

@huverdoose

2 ай бұрын

I think the reason you look for the 'Convertible Valve System' logo is so you know you don't have to replace the orifices, just remove them. If your grill does not have that logo, you will have to put new natural gas orifices where the propane ones were.

No teflon tape on threads!?

@harryschrysan3183

3 ай бұрын

Never Teflon tape on gas appliances. Only pipe dope. Also, on flare connections it's not needed but I would recommend putting some dope on the threads in order to make it tighter and also lubricate the threads so it won't seize when you want to remove it.

@MatthewLine

Ай бұрын

What first, dope or lubricant?

@harryschrysan3183

Ай бұрын

Dope is acting as a lubricant ​@@MatthewLine

@MatthewLine

Ай бұрын

@@harryschrysan3183 that makes more sense, thanks!

How do I get it back to propane?

@NFNNLN

11 ай бұрын

Watch the video in reverse.

@teamTakila

8 күн бұрын

​@@NFNNLN legit what I was going to say