How to use Heathcote Electronics's Single Servo Motor Controller.
Жүктеу.....
Пікірлер: 15
@heathcote-electronics2 жыл бұрын
For more information and to place an order see our website www.heathcote-electronics.co.uk
@desbrookes5662 жыл бұрын
Very informative video thank you.
@dundasjunctionmodelr.r-jam8267 Жыл бұрын
Just subscribed to you your channel , interesting stuff
@carlroberts25392 жыл бұрын
Brilliant Video , very helpful thank you
@paulmeynell886611 ай бұрын
Nice
@stephenfoster72572 жыл бұрын
Exactly the video I needed to persuade me to operate my points from a servo. What I intend to do, though, is operate the points via an over the board linkage from the servo to the side of the points.
@heathcote-electronics
2 жыл бұрын
Thanks for the comment. We have a video at kzread.info/dash/bejne/gpiGj49sXaW8ebw.html which shows points operated with servos.
@bobbowen65 Жыл бұрын
Brilliant video. Very interesting. Can I please ask? With regards to the Servo Motor Controller, am I right is thinking that I would need one of these controllers for each servo? So if I was to have a layout containing 10 x points, requiring 10 x servos, then I would also need 10 x Servo Motor Controllers?
@heathcote-electronics
Жыл бұрын
Thanks for your comments. You are correct that you would need 10 Single Servo Motor Controllers but you would only need 5 Dual Servo Motor Controllers.
@stephenhobbs8120 Жыл бұрын
We're can I bye this item
@heathcote-electronics
Жыл бұрын
Thanks for your interest. Our products are only sold by mail order. You can order them from our website www.heathcote-electronics.co.uk. The circuit board is a Single servo Controller, we also sell servo motors brackets etc but most servo motors are compatible with the Single and Dual Servo motor controllers.
@mauriziocini20742 жыл бұрын
Dove posso trovare sta scheda
@heathcote-electronics
2 жыл бұрын
if its my website you want click on www.heathcote-electronics.co.uk
Пікірлер: 15
For more information and to place an order see our website www.heathcote-electronics.co.uk
Very informative video thank you.
Just subscribed to you your channel , interesting stuff
Brilliant Video , very helpful thank you
Nice
Exactly the video I needed to persuade me to operate my points from a servo. What I intend to do, though, is operate the points via an over the board linkage from the servo to the side of the points.
@heathcote-electronics
2 жыл бұрын
Thanks for the comment. We have a video at kzread.info/dash/bejne/gpiGj49sXaW8ebw.html which shows points operated with servos.
Brilliant video. Very interesting. Can I please ask? With regards to the Servo Motor Controller, am I right is thinking that I would need one of these controllers for each servo? So if I was to have a layout containing 10 x points, requiring 10 x servos, then I would also need 10 x Servo Motor Controllers?
@heathcote-electronics
Жыл бұрын
Thanks for your comments. You are correct that you would need 10 Single Servo Motor Controllers but you would only need 5 Dual Servo Motor Controllers.
We're can I bye this item
@heathcote-electronics
Жыл бұрын
Thanks for your interest. Our products are only sold by mail order. You can order them from our website www.heathcote-electronics.co.uk. The circuit board is a Single servo Controller, we also sell servo motors brackets etc but most servo motors are compatible with the Single and Dual Servo motor controllers.
Dove posso trovare sta scheda
@heathcote-electronics
2 жыл бұрын
if its my website you want click on www.heathcote-electronics.co.uk
Hand held cams sucks
@heathcote-electronics
4 ай бұрын
True, we have a tripod now.