I always get no sound whenever I have smoked a joint 😕 ohh helps if I turn my speakers on. Still no sound . Ohh amps not on .. still nothing . Ohh helps if I load a track 😅

@Soundsbadbro

2 жыл бұрын

I don't think you've been smoking what you think 😵‍💫

@SniffinYaMum

5 ай бұрын

Bro what you smokin ahahahahahaha

Awesome instruction! thank you, just upgraded myself to RX2 and struggling to get the settings correct! And then i found you !!! 🙏 one of the best on you tube for sure ,respect to you !👍👊

adjusting the tempo range was so helpful!! I was just complaining about this last week! thank you as always!

I know some of this seems obvious (especially to people with experience), but by working with beginners I see these issues resurfacing again and again and again, so hopefully this video can help you get past potential hiccups so you can focus on what's important - playing music ;)

@alwaleedalmamari908

2 жыл бұрын

Dear Andrew please if you can made video for utility settings on djm900 NXS 2 it will be very helpful. Thank you 🙏

@zackattack5504

2 жыл бұрын

How do I sync my record pool to my serato do emails gotta match or sumthin? Cuz I'm truly brand new to digital

@anthonyjurcevic7724

Жыл бұрын

How do your tracks load instantly to your track. When i select my next track it takes a while to load onto the track, is there a way to play song offline to maybemake it quicker or is there more settings to improve this. Please help.

Quantise for looping and turning off wide mode = super helpful, thank you 🙏🏽

Thanks a lot, you showed all the actual setting I was looking for! cheers mate!

Great video buddy!!! Thank you very much 🎛🙏🏼🙌🏼🙏🏼🎛

You are THE BEST teacher on KZread in this DJ space. I've learned so much from you. I will be buying a course.

@ClubReadyDJSchool

2 жыл бұрын

Legend , when you're ready email me and I'll give you a code: andrew@clubreadydjschool.com

Great video thank you for going through everything

Thanks Andrew! I’ll take a couple tips from this video for sure.

you are a great teacher thank you for this video i also have the DDJ400 and i love it

Love all your vids, they have shown me alot and I revisit them for inspiration👍. A good tip is to make sure all knobs, faders, switches, and slider are in a nuetral or default positions before opening youre software, it helps troublshooting when you startup the same way everytime.

@ClubReadyDJSchool

2 жыл бұрын

Couldn't agree more :)

You solved my problem! I was playing dynamic! Thank you!!!

Dynamic analysis is extremely useful for anything recorded with a real drummer (you'll still probably have to adjust the grid but it'll be closer), or anything recorded with an analogue drum machine, where you might get small tempo fluctuations. Worth knowing if you play any older electronic music from the 80s and early 90s.

@LisavanDo

Жыл бұрын

thanks! went to the comments to get this answer!

Thank you for this. I have needed a quick guide to help me figure out what some of the settings meant. Funny thing is the one I was most scared of was no sound. Turned out to be a non issue.. and now my house shakes. HA!

Couldn’t figure out why the audio wasn’t coming out of my speakers and such a simple thing! Thank you!!!

Great video.

Nice guy, thanks!

Awesome✨

Really helpful

thank you:)

Hello Legend! Your videos are always the most helpful material and your method of mixing style and helped me learn a lot. Just a quickie - Is there any setting on Tempo fader to make it more accurate? In my mixer, if I'm trying to get from 126 to 128, it will always land on 128.02 or 127.08 but not accurately on 128. How can I fix that?

Your funny style....! Its woow... it make you unique.... and your lessons are good

Great video as always! So helpful and inspiring. Would you do us a dub techno mix with some tips? Very hypnotic, repetitive music with very subtle phrases. Bliss!

@ClubReadyDJSchool

2 жыл бұрын

Great suggestion, will add to my to do list!! It;'s getting a little long though ;)

Anyway to save FX parameters, and also beat jump so don't have to go to the 32-64 section on screen everytime I load recordbox) ?

hi and thanks for the video, but how is the best "output headroom" for DDJ-400?

Thank you for the tips. Updated to rekordbox 6.6.1 from 6.6.0 and my Mixer panel is completely disabled therefore I cannot enable Quantize and Master Tempo. Any help will be highly appreciated?

great video just one question what about headroom setting i am using ddj flx4 controller

Could you do a video how to stream with the ddj 400 please I’ve looked at a evermix box but will the splitters make the sound rubbish as will be mono as also want to record the audio as a mp3 to put on phone

*CORRECTION* Clubs Don't "generally have Blue wave forms." The color of the wave forms are always based on the setting you choose on your Rekordbox.(RBG,BLUE or 3BAnd). I prefer RBG, that's the only reason I say anything.(I'm not hating) The rest of the video was very useful.

@ClubReadyDJSchool

2 жыл бұрын

Yes you are right, I guess I'm old school and am used to the blue as it was the only option for many years. In truth I prefer blue as it offers less visual cues, but appreciate that people may want RGB - all good, my apologies.

@fastmaverick13

2 жыл бұрын

@@ClubReadyDJSchool No need to apologize! Like I said, I wasnt hating on ya. I just figured I'd put my input just in case lol. Keep up the killer content, dude!

On the setting at about 7min 55 sec, how can I make this effect apply to when a song ends like say the last track of my set I want to just let it play I want it to sound like an engine is powering down, also when saving these settings to my usb how can I make vinyl on when importing my usb settings? I noticed when I apply my settings vinyl doesn't auto turn on. Also, do you have any videos of configuring Flstudio or ableton/daw to connect your deck to record? I haven't been able to figure out how to configure a program to record and make sure the sound being recorded is at its best. Thanks for all your videos super helpful. 🖖🤙🤌

I’m used to preparing USB’s for my XDJ-XZ but when I connect my laptop to use in performance mode I can’t see the track info on my mixer (bpm, key etc) Does anyone know what settings I can change for this?

can you make a tutorial mixing lesson video where you link the songs in the discriptions and we can follow along thanks man

Hey there! I somehow messed with something in rekordbox and it now won’t display the typical BPM’s for track one and two on the screen (instead just one in the very middle) I think it has something to do with my effects panel but i’m not sure. Any tips?

Honestly, after finding out about the eject/load lock, I choose to have it locked. I'm scared of loading a track onto the wrong deck, just imagining that happening at a club strikes fear into my heart. I rather just get used to pausing before a new track, even if it is tedious.

@damianlee389

Жыл бұрын

Absolutely. I've never understood why it's an option.

I just bought the Flex 10 pioneer my crossfader stopped working on the hardware but not the software is there settings to fix this ?

Hi DJs need some help. my rekordbox waveforms are bit jumpy very hard to mix in its like a stuttering kind of patterns. any thoughts why thats happening? i noticed on rekordbox settings my buffering has gone up to 32.5 and i cant seem to change it because its in kind of lock mode? please help.

i have a problem with my DDJ-RB controler it won't install the driver no more it says fail error code 004 reinstalling the firmware was no problem but it seems on my new pc windows 10 it won't install the driver how to fix it?

Hi I have a problem I just installed the rekordbox on my laptop and and put my license key but when I plug my ddj400 it's jamming I don't know what's happening can you please help me 🙏😩

Do you need the 8 pads at the bottom? I noticed in your newer videos you don't have them

I love your work mate. I did see that you have psy trance on your play list. Have you made a psy mix on your channel before ? Thats what i play the most Progressive psy 😎

@ClubReadyDJSchool

2 жыл бұрын

This is actually the next set I plan to do, maybe 2 - 3 weeks

@theaverageguy3884

2 жыл бұрын

@@ClubReadyDJSchool I will buy some popcorn and sit ready for it to be posted. Keep up the good work you do. Noobs like me are like a sponge sucking up tips and tricks 😘

@ClubReadyDJSchool

2 жыл бұрын

I'm finally ready and with any luck will have 2 psy trance videos over the next 2 weeks (a mix and then a set breakdown with tips etc). I am so sorry for the delay and even worse, I can't find that list of tracks you sent. Right now I gravitating heavily towards Space Tribe!!!! Really vibing with it. Anyway, if it's not too much trouble can you re send your suggestions to andrew@clubreadydjschool.com

@theaverageguy3884

2 жыл бұрын

@@ClubReadyDJSchool Sorry mate but i have not sendt you a track list. Guess you have been talking to someone else 😘

Why in my RB dosn’t show Back Spin Length? Anyone know’s?

By Looping the function quantize doesn't work somehow at my DDJ 400 & Rekordbox 5.8.6, even when I have the same settings, Loop Quantize ENABLE & interval at 1. I tried changing these to all different settings but it's the same all the time. It's doesn't snap the loop to the beat which makes looping very complicated and nearly impossible to have a good working one! Someone had this issue before? Help please 🥺

@kendeelD

2 жыл бұрын

UPDATED: the Problem was that the Quantize button near the BPM was not activated! Thank you. super informative Videos like always. Keeeeeeeeeep going!

how yoiu get key highlighted?

What about the trim gain settings… 0, 1, or say -9… I’m also wondering about should the gains be off, or remember or auto…. For years I’m still trying to figure this out. Great videos for newbies.

@giulio2lavendetta

2 жыл бұрын

gain/trim sets how much the sound signal gets amplified. You might find that some tracks have simply been recorded at lower/higher volumes than others, so you use trim to take care of that. What I like to do is to have the tracks always just under the orange level from the volume LED bars, sometimes letting some frequencies to orange when I want to underline those particular sounds. You never want red, that measn the amplification is so much that you start to loose signal quality. A lot of people actually set the gain to the max trying to be as loud as possible, but it will just make the track sound worse. cheers

@DJStanSteel

2 жыл бұрын

Thanks for that…. I pretty much do and understand everything you wrote… was just wondering more about the software setting… nothing more…. U know what it’s like… so many settings to mess with and not wanting to change stuff…. I’ve kinda stuck on -3db in the software. I find recording sets this gives the best sound and also plenty of head room for low recorded tracks. Shame there is no standard on digital files.

Hi mate, how do you do to have green label on key, so you know this is harmonically campatible? It's more clear with the green thing

@ClubReadyDJSchool

Жыл бұрын

I'll aim to do a short on this asap

UP STREAM

Hello, not a DJ but play at home to entertain my family and friends. Using RB on Mac and I am looking at the FLX4 as a step up. Is this a good choice as an upgrade. Please advise. Thanks 🙏

@ClubReadyDJSchool

7 ай бұрын

The FLX4 is awesome!

I'm having issues with once I beat match with the sync button. It won't let me adjust the tempo button to go back to normal BPM once my new track is playing. The tempo is stuck at the other tracks BPM. Then when I try to adjust it it messes up the song. Would anyone know how to fix this?

@tonyscholer1493

2 жыл бұрын

If I have the tempo fader of the "stuck" track in the middle, I take it all the way down, then all the way back to middle as fast as possible. This seems to reset it. But remember, if the tempo of the track you're trying to manipulate is different than the one you had as the Master, you may end up in left field somewhere. Keep an eye on that tempo once it's freed up..

@sdot3358

2 жыл бұрын

@@tonyscholer1493 I'll give it a try. Thank you sir

@tonyscholer1493

2 жыл бұрын

@Steven Shearer Agreed. I only use it if I just want to let songs ride with no effort, or if I'm busy doing other stuff while playing music. Normally it's making dinner or drinking beer....or both.

@ClubReadyDJSchool

2 жыл бұрын

Sorry for late reply, seems like Tony and Steven have answered for me - thanks guys :)

@sdot3358

2 жыл бұрын

@@tonyscholer1493 😂 got u

Hi Andrew, just bought your course and logged on but can't seem to find the videos to get started. All I can see is your 2 min intro. Am I missing something in plain sight?

@ClubReadyDJSchool

2 жыл бұрын

Hit the tabs under the main video haha - if you still have issues can you please screen shot what you see and email me please - andrew@clubreadydjschool.com

On and off should be off and on, cause its already on ..lolz

trim shouldnt be at midnight. trim should only be turned up so that the LED indicators hover around 0dBU. sure it might be at midnight for some tracks, but it might need to be a bit more or a bit less for others. it's one of the things that DJs do that sound guys just do not understand. it might look symmetrical, but it has nothing to do with unity. you adjust it based on the level output. the eqs should always be at midnight because it is set to be at its nominal output (zero) at midnight. the Master level as well is something that DJ's always put to midnight. that is wrong. it actually is marked on most if not all pioneer equipment.. 0 DB is about 2 o'clock. that is unity. set your master to unity, and leave it there. you shouldn't have to adjust that at all again. volume control can be done from the individual channels from there on in. this ensures you get the best SNR (signal to noise ratio). one DJ at my club kept adjusting the master to midnight and turning up the individual channels louder to make up for the lost volume.. and I lost my mind with this guy. after the party, he told me he likes it looking symmetrical I was gobsmacked by the stupidity of that statement. I said dude I don't care how it looks it's how it sounds. you're turning up the noise floor if you're turning down the master and turning up individual channels. it is ridiculous to base your DJing on how the knobs look to you.. so many people have just gotten bad habits or learned the wrong thing and stuck with it. if you ever play a gig and you have a sound guy that is giving you advice, listen. it's like a free Pro lesson if they're giving you advice. another DJ argued with me that she has been DJing for over 20 years and she knows how the levels work. no I was blunt and I said well I don't care how long you've been DJing, I look young but I'm actually in my 40s I'm having DJing much longer than she has. but I just told her then you've been doing it wrong for 20 years. you don't want to piss off the sound guy. because they report back to the owner and promoters. and if you think that squaring off against the sound guy is going to get you a head or get you more bookings, think again. the sound guy is going to be protecting the sound system from damage and club owners will always choose that over some DJ that has a chip on his or her shoulder

@nickloss2377

4 ай бұрын

this is one of the channels that I would suggest you guys pay attention to. this Aussie knows his shit. even when he says turn the trim to midnight, he's talking about problem solving a 'no sound' situation. there's another Australian DJ channel that consistently gives the wrong advice.. I'm not going to name names or anything... but this is one of the channels that consistently gives proper advice.

@ClubReadyDJSchool

4 ай бұрын

I appreciate this very much and you're right about the 0dBU, I may have to re do this at some point and appreciate the feedback