In this expriment we have used 32 SWG copper enamelled wire.

@Learnnhvfun

2 жыл бұрын

Copper is better than aluminum

@vijaysrivastava6355

2 жыл бұрын

Hey can you please tell me that from where I can buy this copper enamelled wire...

It's great loved it thanks for helping me understand this

@Learnnhvfun

3 жыл бұрын

Thank you.. keep watching our new experiments.😃

@PUROHITANIL7

2 жыл бұрын

@@Learnnhvfun I really enjoyed a lot from these video.. and shared as much I could Few suggestions if possible and of course if you consider 1. Make playlist according to class level like 6,7,8,9,10 and so on 2.kindly share links where to purchase material required for practicals from Amazon or other source. It will be beneficial for all because in many remote parts even bar magnet or neodyonium magnets are not easily available.. These will make these your videos more useful as I think so Thanks and regards

@Learnnhvfun

2 жыл бұрын

@@PUROHITANIL7 thank you so much dear for your valuable suggestions. We will definitely use your advise and improve. Sorry for the late response.

All the people who are watching this video from class 10th

@ZanderMGanaden

6 ай бұрын

Grade 10

@mrsrenu9988

2 ай бұрын

Yes sir

Wow I have understood motor because of this video 👍👍

@Learnnhvfun

3 жыл бұрын

We are super happy to hear that. Thank you.

Thank u sir.... It was so confusing for me to read theory so I just came to watch practical and it was just awesome....

@Learnnhvfun

2 жыл бұрын

So happy to know this dear 😃

Whenever current carrying conductor passes through magnetic field then it experience a force this force rotates the conductor😌😌😌😋

@Learnnhvfun

3 жыл бұрын

Absolutely correct 👍, here the forces acts on the arms of the rectangular coil. The forces on the arms are in opposite direction which produces a torque... I.e. rotating effect..

@Manojkingvideos

Жыл бұрын

Current carrying coil chutiye conductor nahi, conductor toh loha bhi hota hai toh kya woh bho torque karega

@neverstoplearning6796

Жыл бұрын

Is it a lorentz force ?

@sharon69121

Жыл бұрын

@@neverstoplearning6796 Yeah

@manojlambat6578

Жыл бұрын

@@neverstoplearning6796 no it is a torque formed

Sir thanks A Lot 😍😍 Because I was thinking that how two poles of magnet can be separated and can be placed both side But Now All Doubts Cleared

@Learnnhvfun

2 жыл бұрын

Thats great 👍. Keep watching 👀

Great work....very useful for teaching

@Learnnhvfun

3 жыл бұрын

Thank you.😀

Awesome 👌👌👌👌

@Learnnhvfun

3 жыл бұрын

Thank you.

Very beautiful 😍😍❤️

Such a simple and effective model

@Learnnhvfun

3 жыл бұрын

Thank you for watching dear😃

Is par Fleming's left hand rule lagta hai . When the current carrying conductor is placed in an external magnetic field it experiences the force which is perpendicular to Magnetic field and current direction 🧐

Was very helpful for my daughters project. Thanks a lot

@Learnnhvfun

2 жыл бұрын

Glad to know this 😊

Sir practical explanations are far better than lectures given by teacher in Sci sr .... Thanku sr this help me ....

@Learnnhvfun

2 жыл бұрын

Pleasure Arnav 😊

@qaz3210123

2 жыл бұрын

@@Learnnhvfun You really have no shame... Still, as I said somewhere else, stupid morrons do deserve to be fooled and laughed at... Good job!

How much turn used and How much distance will be maintained of coil from magnets Which material used for split rings

@Learnnhvfun

3 жыл бұрын

Kindly go through the comment section. You will surely get all the answers.

Hello! Can I ask for the list of all the materials you used??

Wah Dil garden garden ho gya . Jo bhi aaj sir board pe bataye wo ek eke chiz ushme work karte hue dikh rha hai . Thank you thank thank you very much

@Learnnhvfun

Жыл бұрын

Glad to know

Sir also post the video of the electric generator.

@Learnnhvfun

4 жыл бұрын

Sure will post soon

@shyamlalyadav4301

4 жыл бұрын

@@Learnnhvfun Thank u sir

Nice

@Learnnhvfun

3 жыл бұрын

Thank you. Hope you are following our channel.

Great👌🏻

@Learnnhvfun

3 жыл бұрын

😘

thank u soo much it helped me in better understanding

@Learnnhvfun

3 жыл бұрын

Good to hear that.☺ keep watching

Good .

Sir I can't understand that commutator part. How did you make it. How did you change the direction of the current to get complete rotation? Can you explain pls. If we want to rotate it in clockwise then the direction of the current is clockwise in first half and anti clockwise in second half to get a complete rotation. How did you do the change in direction

@agc008anshikabamberwal8

Жыл бұрын

Watch the video at 4:54 , and u would get that Sir has taken split copper strips . And as the rectangular copper wire rotates, the strip along with it also do rotate itself and thus the current goes on move in the same direction as before in each half Of the rectangular copper wire . There is a role of " rotating" split copper strip in rotating the copper wire

@agc008anshikabamberwal8

Жыл бұрын

*for complete rotating the copper wire

@ele3140

Жыл бұрын

@@agc008anshikabamberwal8 Hello! I'm making this project right now and I'm struggling because I can't find any copper strips:( Can you please tell me if this project gonna work even if I don't have copper strips? and also if it's not, Is there an alternative material to use instead of copper strips? Thank you:)

@agc008anshikabamberwal8

Жыл бұрын

@@ele3140 can use aluminium foil in place of copper strip

@agc008anshikabamberwal8

Жыл бұрын

@@ele3140 Hello, You can use Aluminium foil in place of copper strips

Great channel bro

@Learnnhvfun

3 жыл бұрын

Thanks Pratush. Keep watching.

Do the N pole and S pole of the magnet has anything to do with the anode and cathode of tha battery?

@Learnnhvfun

3 жыл бұрын

Not really.

Thank you so much sir ji 🙏🙏🙏🙏🙏🙏🙏

👍👍👌👌

@Learnnhvfun

3 жыл бұрын

Thank you.

My project did not work and I was fully dependent on this video. Thanks!

@Learnnhvfun

3 жыл бұрын

What was the problem??? You should have asked.

Wonderful

Hello! I'm making this project right now and I'm struggling because I can't find any copper strips:( Can you please tell me if this project gonna work even if I don't have copper strips? and also if it's not, Is there an alternative material to use instead of copper strips? Thank you:)

@salilmathur1300

Жыл бұрын

Use aluminium foil used in tablet packaging or

Instead of wooden blocks can we keep any other resistance if yes so which substance we can keep there ??

@Learnnhvfun

3 жыл бұрын

Look for any cube or cuboid shaped objects around.. it can be a small box 📦, a katori, a bottle cap which can hold magnets 🧲, thermocol pieces or any thing which you can think it can work..

@Sanshkriti_Gupta

3 жыл бұрын

@@Learnnhvfun so that means if I will use thermocol instead of wood it will be okay it will work just like your electric motor

@Learnnhvfun

3 жыл бұрын

Yes it would work.. thermocol pieces should be strong.. like those which we get in packaging of TVs and refrigerator. The one which we get in stationary shops are very light.

@Sanshkriti_Gupta

3 жыл бұрын

@@Learnnhvfun so from where should I can get it and one last question what should be the size of these bolcks and the size of that slab

@Learnnhvfun

3 жыл бұрын

As you can see, I am using pencil as an axle, so size of slab is slightly larger than pencil. You can get thermocol from packaging of TV, refrigerator.. ask your friends, neighbours or relative.. instead of sellings packaging to junk dealer they can give you for this project.

Sir is brush necessary for this. What is the work of the brush?

@Learnnhvfun

3 жыл бұрын

Yes..to maintain the electric contact with comutator. In our case we have not used the one but manually hold the wire.

Can we use insulated 30 swg copper wire

Here do the coil moves in same direction continuosly or it reverses in half rotation

@Learnnhvfun

2 жыл бұрын

Same direction continuously meenakshi 😃

Bro I have used a little bit thick wire same like you with 130 aprox turns will it work

@Learnnhvfun

2 жыл бұрын

Can't say anything... thicknesses of the wire is just one thing. Try it and let us know if it works.

Well done sir I would like your's electric motor I am student of 10th class

@Learnnhvfun

2 жыл бұрын

Thank you manjeet😊

Very nice

👍👍

@Learnnhvfun

3 жыл бұрын

👌👌

Very innovative

@Learnnhvfun

2 жыл бұрын

Yogesh 😇

good job Vinod...Vinod mere dost tumne 3v ki battery sai jaise chlaya hai hats off ....kya ghumaya hai mere dost tumne 3v ki battery sai maja aagyi...

@Learnnhvfun

2 жыл бұрын

3v nhi hai 6v hai mere bhai. 3v se kuchh nhi ghumega. Dhyaan se dekho 4 cell hai.

@sachintiwari2163

2 жыл бұрын

bhaii humne bhi banaya tha usmai toh 9 v sai bhi nhi ghuma fir ups ki battery sai ghumaya

@Learnnhvfun

2 жыл бұрын

@@sachintiwari2163 bhut badiya.. matlab ghuma k hi mane. 👍 good

Sir how musch power is required to run a coil with 800 turn

@Learnnhvfun

3 жыл бұрын

Try 6V to 9V battery

Wow, so fantastic video sir. I was looking for the same video. Thanks a bunch!

@Learnnhvfun

3 жыл бұрын

Welcome Abhay😊😇

Amazing👍😊

@Learnnhvfun

2 жыл бұрын

Thank you Rishi😊😇

Kitne gauge ki wire use karni hai mam

This is the best one

@Learnnhvfun

3 жыл бұрын

Thank you so much Shubham😃😊😇

I have used 2 magnets instead of 6. Is it the reason why my motor isn't working? Please do reply as soon as possible. I need to submit my project in a couple of days. Please🙏

@Learnnhvfun

3 жыл бұрын

F = B I L Force experienced by a arm of current carrying loop depends on three factors. 1. Strength of magnetic field B 2. Magnitude of current I 3. Length L of the wire under the field So try increasing the force either by increasing external magnetic field by using strong magnets 🧲. OR by increasing the numbers of cells or voltage. I used 6V by combining 4 AA cells in series. Keep the wire lighter by taking SWG 22 or 24 wire and take 50/60 number of turns. Don't make the loop too much heavy. Also keep the axle lighter.. you can use pencil or even lighter kulfi sticks.

is this copper wire insulating wire? Or general copper wire?

@Learnnhvfun

2 жыл бұрын

Copper enameled wire. Size 32 swg

Hey hi You have put something on the pencil before putting the copper strip. What's that?

@Learnnhvfun

3 жыл бұрын

Hi It was fevi quick.

Can u pls tell the materials used in this project with a little information of each material

It is very nice Tank you very much

@Learnnhvfun

2 жыл бұрын

😊😇. Keep watching dear

How much copper wire is needed?

@Learnnhvfun

3 жыл бұрын

5m copper wire will be enough.. but keep a margin of +2m.. as some of the wire may be wasted while doing the project..

Nice one

@Learnnhvfun

2 ай бұрын

Thanks 🔥

BHAIYAJI THANKYOU MAZA AYA BHAIYAJI COPPER STRIPS KI JAGAH KOI AUR METAL USE KAR SAKTE HAI KYA ?

@Learnnhvfun

3 жыл бұрын

Go through the comment section. Hope you will get all answers.

Sir i have a doubt.. If it is rotating 1/2 clockwise And 1/2 anticlockwise then how the fan are rotating in one direction only???

@Learnnhvfun

2 жыл бұрын

Because of slip rings in AC motors... The motor continue to rotate in one direction only Here we have made a dc motor and we are using split rings to achieve the continue rotation in one direction

Its impossible..... what method you used for complete rotation?

@Learnnhvfun

2 жыл бұрын

Nothing impossible...just need to try.

thanks sir my doubt is cleared

@Learnnhvfun

2 жыл бұрын

Thats great 👍

beautiful project lovely

@Learnnhvfun

2 жыл бұрын

Sarvesh 😊

U use pencil and pencil is an insulater so how current flow in this process pls explain

@Learnnhvfun

2 жыл бұрын

There is nothing to explain in this case. Current is flowing in the wire and not in the pencil.

Thankyou sir ji

@Learnnhvfun

3 жыл бұрын

Welcome Abhay.

How much watt battery is used in this experiment

Superb

@Learnnhvfun

2 жыл бұрын

😊😇

Amazing

@Learnnhvfun

2 жыл бұрын

Thank you Rani 😊

Very nice video sir

@Learnnhvfun

2 жыл бұрын

Thank you Vinay 😊

Where can we get that copper strip for split ring

@Learnnhvfun

3 жыл бұрын

You can get it from electrician in your neighbourhood.

Is this insulated copper wire or non insulated

@Learnnhvfun

3 жыл бұрын

This is insulated copper wire.

@crazyduniya128

3 жыл бұрын

@@Learnnhvfun ok thanks

It's working

Is copper strip is available in our house , in some applicants of our houses

@Learnnhvfun

Жыл бұрын

Yes..in wiring and inside many electical instruments also

Aluminium wire use kar sakte hai?

@Learnnhvfun

2 жыл бұрын

Yes

Sir i have made the model same as yours but my motor is not working properly..it moves just half round and stops..so can you tell me where i m lacking and what should i do

@Learnnhvfun

3 жыл бұрын

That means rotator is not getting enough torque.. How many cells you are using? Use 4 AA cells to get a voltage of 6V

@Learnnhvfun

3 жыл бұрын

Rotator may also stop if there is friction between wires and split rings (as in my case I didn't used carbon brushes) or between brushes and split rings in general.. Make sure split rings are smooth and there is no roughness.

Can we use tape instead of solder

@Learnnhvfun

2 жыл бұрын

Yes.. but not a permanent solution.. will get loose after working for few minutes.. as it is just a project which you need to show and work for few minutes.. you can try.

Not seen vedios like thes in your channel anywhere else

@Learnnhvfun

3 жыл бұрын

Thank you Pratyush 😊

Hi bruh what is the gauge value of the copper wire.

We've tried to make model but the model isn't working the copper coil is not roaming. What should we do !?

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ ...infinity ❤

@Learnnhvfun

3 жыл бұрын

🙏🙏🙏🙏🙏infinity for your love and support Bhagya.

@bhagyaprasadshetty5013

3 жыл бұрын

@@Learnnhvfun too early reply😅. Welcome 😊

@Learnnhvfun

3 жыл бұрын

@@bhagyaprasadshetty5013 it happen sometime🤣🤣

@Learnnhvfun

3 жыл бұрын

We are in a learning phase too.

any alternative for copper strips

@Learnnhvfun

3 жыл бұрын

Try copper tape. Easily available on Amazon

Very helpfull i made it

@Learnnhvfun

3 жыл бұрын

Really 😃... that's great Yash👍

Thanks sir.

@Learnnhvfun

2 жыл бұрын

Dhruv ☺️😊

What is that on both sides of pencil please tell me?

Sir where can I find these Cooper strips??

@Learnnhvfun

2 жыл бұрын

Electric shop

Hi how to use the power supply battery + and - terminal

Sir also do electric generator.

@Learnnhvfun

Жыл бұрын

Will try for sure

Can I use the small magnet of old dc motor? Please tell

@Learnnhvfun

3 жыл бұрын

Yes you can Shridhar😃

@shridharkamble3528

3 жыл бұрын

@@Learnnhvfun thank you sir for replying

@Learnnhvfun

3 жыл бұрын

@@shridharkamble3528 😃

sir how to make split rings

@Learnnhvfun

3 жыл бұрын

I used copper strip which I got from chemistry lab. You can also use copper tapes..these are easily available in market. Take two small pieces of copper tape or strip and attach it with the axle (it is pencil in my model) using feviquik

I have a doubt why u used magnets

@Learnnhvfun

3 жыл бұрын

If not magnets.. how will you create magnetic field Ashish???? Without magnetic field a current carrying wire will not rotate. Hope this will be helpful😃. Keep watching dear.

How to connect this to battery

Science is fun

@Learnnhvfun

2 жыл бұрын

Indeed😇. Keep watching dear

Sir I tried this.but it stops after 90 degree rotation.what could be the problem

@Learnnhvfun

2 жыл бұрын

Are you using split rings? Split ring changes the direction of current in coil after half rotation.

@athiramanoharan877

2 жыл бұрын

Yes I used split rings.

Sir , please make on video on generator also

@Learnnhvfun

3 жыл бұрын

Yes sure.. will make

@Learnnhvfun

3 жыл бұрын

Saw your question in notification which you then deleted..you were asking about carbon brushes.. Here I avoid use to carbon brushes or any other brush to make contact with split rings because I used pencil as an axle which is supported on a safety pin.. this arrangement makes the axle a little shaky.. you can observe the motion of pencil in the video.. if I connect a carbon brush then that contact with brush is not stable.. soon the shaking movement of pencil push away the brush.. So I hold both wires from the battery and manually connect it with slip rings..

@sakshiyadav3512

3 жыл бұрын

@@Learnnhvfun Ok sir

@sakshiyadav3512

3 жыл бұрын

@@Learnnhvfun But , I want to see how the brush fill the gap and commutator change it's place and how circuit is break at vertical position

@Learnnhvfun

3 жыл бұрын

Just imagine the wires which I am holding as a brush..

I need guidance, how to contact you?

@Learnnhvfun

3 жыл бұрын

You can ask here only.

@sayalikarmode417

3 жыл бұрын

@@Learnnhvfun can you tell me which motor is used here and how to implement this thing? sitaji moves forward and backward in this video, how to implement this? kzread.info/dash/bejne/eGGntsiogt2tqbg.html

@Learnnhvfun

3 жыл бұрын

@@sayalikarmode417 use a servo motor.

Sir jo battery aapne use kari hain vahin hum apne ghar pe banaye aur use kare iss model par toh chal jaega na

@Learnnhvfun

2 жыл бұрын

We have used 6 AA cells of 1.5V. Commonly known as pencil cells.

@aimmotivation1638

2 жыл бұрын

@@Learnnhvfun toh sir ise chalane ke liye aa batery hi jaruri hai kya normal hi waat Battery nahi chal sakti kya??? Pls reply sirrr???

@Learnnhvfun

2 жыл бұрын

@@aimmotivation1638 ye normal hi to hai. Available on shop easily.

Tq

@Learnnhvfun

2 жыл бұрын

Pleasure 😊

What is the length and breadth of armeture

@kalpanachada6362

Жыл бұрын

Please say sir

How many magnets are there

self run battery just to start motor

Where is commutator? And how did you changed the direction of field or current without commutator?

@Learnnhvfun

3 жыл бұрын

Split rings are the commutator.

@devanshsharma5459

3 жыл бұрын

@@Learnnhvfun Okay thanks for clearing my doubt 😊

@Learnnhvfun

3 жыл бұрын

@@devanshsharma5459 anytime🤗

Where will I get the copper strips

@Learnnhvfun

Жыл бұрын

Amazon

Sir do you have a proposal and report for this??,,,am interested alot,,,humbly request am happy with this

@Learnnhvfun

2 жыл бұрын

No dear... I don,t have

carbon brush is not connected

@Learnnhvfun

2 жыл бұрын

Yes.. at that time we didn't had. Will planning to make another project on motor. This time with carbon brush for sure.

Please eek ekk saman batakr ki ya kya ha bana dijiyaa sir 🙏🏻🙏🏻

Bhai aap copper strip kaha se laye please bta do

@Learnnhvfun

2 жыл бұрын

You can use copper tape. Its easily available in electrical store / Amazon