One of my favorites. I always thought of it as an overhand knot under/in a clove hitch.
@knotknut
Жыл бұрын
When you break it down, thats what it looks like.
@geraldcarr7230
Жыл бұрын
That is what it is -- a modified clove hitch. But you are going to have a messed up time if you need to have tension on the line while you are trying the knot. It is a pretty knot as long as you are just going to show the knot but no practical application for the knot
@knotknut
Жыл бұрын
@@geraldcarr7230 I prefer this one over the clove hitch, its less likely to slip
@ThatSB
11 ай бұрын
@@knotknuta clove hitch can be tied while maintaining pressure. This knot can not so easily because it requires going under the line that has the tension
@dangerpea6099 Жыл бұрын
We had a knot when i ironworked they called the apprentice knot. It was a kind of dangerous way to lower buckets of bolts to a lower floor. It was tied in a way where it would pop loose when the bucket hit the floor. 😂
@ericomachado9288 Жыл бұрын
Nó de pé de porco dobrado. Volta de fiel. Escoteiro Érico 🇧🇷😎
@abdoabourjeily8376 Жыл бұрын
Very beautiful
@dudee001 Жыл бұрын
I like to describe this as starting with a clove hitch and wrapping around the first loop
@brandonrogers1950 Жыл бұрын
Why wouldn’t you just tie a clove hitch with a safety
@KayakingVince
Жыл бұрын
This grips a lot more tightly. Clamp it down enough and you will have to cut the rope to ever remove it. Clove hitch is better in 95 percent of situations though
@kyle5373
Жыл бұрын
Pretty much. Minus the safety.
@natas0733
Жыл бұрын
I sense an Ironworker... 433 LA here
@kyle5373
Жыл бұрын
Pot Fisherman. Kodiak, Alaska. F.V.- Sea Barb. 17 yes ago though but still the best 3 years of my life.
@cesspool1676
Жыл бұрын
A clove will roll out or slide under a load unless you tie it off with half hitches. This knot pins the tail under the wraps to help prevent it slipping. Although being a much cleaner knot i would most certainly not trust it under heavy loads.
@bidinz75 Жыл бұрын
Make do daily.. and you can do it👍👍👍👍it's cool ,.....brother
@ColinRichardson Жыл бұрын
I thought this was gonna be the clove hitch again.
@knotknut
Жыл бұрын
I like using the constrictor over the clove hitch because when you tension the constrictor hitch it holds very well. I will be posting another video of the constrictor hitch being tied a different way very soon.
@DavidLaFerney Жыл бұрын
This can tighten enough to replace a hose clamp in an emergency repair.
@knotknut
Жыл бұрын
That is a use I never thought off
@rajkumar-kx9wz Жыл бұрын
🖤💚❤😎👍👍👍
@mohamadnur6432 Жыл бұрын
Thank you bro
@darrellblanchard2362 Жыл бұрын
Clove hitch with the free end under.
@owemylife Жыл бұрын
Eh, Clove hitch with a half, add a bite if you like. Won't bind.
@TITTER. Жыл бұрын
I like using a rolling hitch, it holds well and unties easy. But I guess it might serve a different purpose.
@daviddilley9182 Жыл бұрын
Great demo ….good for tieing a gunny sack closed…can be hard to untie!
@felixborges9885 Жыл бұрын
Muito bom
@quinntheeskimooutdoors6234 Жыл бұрын
Nice
@alvindueck2104 Жыл бұрын
First time seeing it done this way
@knotknut
Жыл бұрын
I will do another video building it in your hands, hopefully soon.
@michaelzimmerman8959 Жыл бұрын
Right! That's like someone putting their finger on it when you're tying the knot.
@knotknut
Жыл бұрын
Yes, it is. Holds a lot tighter than a clove hitch.
@letroisiemeoeil Жыл бұрын
Simple à regarder, mais difficile à retenir.
@Schnazola6 ай бұрын
Honestly, I think every tutorial on tying this knot should come with a major disclaimer(s): a) Once tensioned, it can't be untied, and b) don't use on any body parts!
@richrock8960 Жыл бұрын
This is called the cobra constrictor. A regular constrictor uses three wraps and comes up under the middle and locks that way
@timothykelly2605 Жыл бұрын
Clove hitch with extra steps
@a9ball1 Жыл бұрын
I would love to know how the very first person figured out all the kinds of knots? Was it trial and error or imagined first .
@knotknut
Жыл бұрын
Most of the knots seem to come from sailors back a few hundred years. We use coma longs, zip ties and tie down straps
@a9ball1
Жыл бұрын
@@knotknut I tend to agree with that. I was just sitting here wondering (imagining) them trying to figure out how to make a certain knot do what they want it to do 😉 . On a creaky, leaky old wooden sailing ship as it rocks back and forth while the waves are crashing over the deck.
@philrobson4287
Жыл бұрын
I heard that a British surgeon (who sailed) was using this knot in surgeries before he had ever seen any one else use it. So it may have been created by many users after playing around with the clove hitch.
@a9ball1
Жыл бұрын
@@philrobson4287 , that could have easily happened. I'm sure surgeons know more knots than I do. Heck a toddler probably knows more than me.
@stewartj3407
Жыл бұрын
His name was Wendel C. Brimblebrag. He’s the one that invented all knots ever tied.
@harpinhankhogang8349 Жыл бұрын
I had trouble tying up the dinghy when I was young ! Don’t know but it could come in useful - know you knots !
@dvk578 Жыл бұрын
oo, so that won't just come off? seems like it is not really fastened on there... what are some good uses for this knot?
@Sifo_Dyas Жыл бұрын
A constrictor **knot** is not intended to function as a **hitch**.
@mikeryan6277 Жыл бұрын
Similar to a Timber Hitch.
@frictionhitch Жыл бұрын
Just tie a clove
@johngrussing8054 Жыл бұрын
Or just tie a clove hitch
@MaartenNouwens Жыл бұрын
Knut does not tell what the properties of the knots are, so what you can use the knot specifically for. I do not subscribe Knut but others
@stevensparks8202 Жыл бұрын
Great audio, and video quality, but this instruction is almost useless because you don't explain what it is used for, it's strengths and weakness,what other knots are applicable in its place.
@knotknut
Жыл бұрын
With short videos I have only 60 seconds, not enough time to explain uses. A lot of ppl have commented on their uses of this knot. I like to use it in the place of a clove hitch and it works well for tying bundles of pipes together.
@ThatSB11 ай бұрын
Why dont you describe it as "first, make a clove hitch"
@BlondeQtie Жыл бұрын
showing a knot without explaining its use cases is just a waste of time
@yaglehoole5662 Жыл бұрын
Ok knot, but lousy teach. The way he moves misleads you where the open end of the rope should thread through.
@ShieldsHD Жыл бұрын
This is a stupid clove hitch. And it’s also missing a safety.
Пікірлер: 68
It's the clove hitch's scary big brother
One of my favorites. I always thought of it as an overhand knot under/in a clove hitch.
@knotknut
Жыл бұрын
When you break it down, thats what it looks like.
@geraldcarr7230
Жыл бұрын
That is what it is -- a modified clove hitch. But you are going to have a messed up time if you need to have tension on the line while you are trying the knot. It is a pretty knot as long as you are just going to show the knot but no practical application for the knot
@knotknut
Жыл бұрын
@@geraldcarr7230 I prefer this one over the clove hitch, its less likely to slip
@ThatSB
11 ай бұрын
@@knotknuta clove hitch can be tied while maintaining pressure. This knot can not so easily because it requires going under the line that has the tension
We had a knot when i ironworked they called the apprentice knot. It was a kind of dangerous way to lower buckets of bolts to a lower floor. It was tied in a way where it would pop loose when the bucket hit the floor. 😂
Nó de pé de porco dobrado. Volta de fiel. Escoteiro Érico 🇧🇷😎
Very beautiful
I like to describe this as starting with a clove hitch and wrapping around the first loop
Why wouldn’t you just tie a clove hitch with a safety
@KayakingVince
Жыл бұрын
This grips a lot more tightly. Clamp it down enough and you will have to cut the rope to ever remove it. Clove hitch is better in 95 percent of situations though
@kyle5373
Жыл бұрын
Pretty much. Minus the safety.
@natas0733
Жыл бұрын
I sense an Ironworker... 433 LA here
@kyle5373
Жыл бұрын
Pot Fisherman. Kodiak, Alaska. F.V.- Sea Barb. 17 yes ago though but still the best 3 years of my life.
@cesspool1676
Жыл бұрын
A clove will roll out or slide under a load unless you tie it off with half hitches. This knot pins the tail under the wraps to help prevent it slipping. Although being a much cleaner knot i would most certainly not trust it under heavy loads.
Make do daily.. and you can do it👍👍👍👍it's cool ,.....brother
I thought this was gonna be the clove hitch again.
@knotknut
Жыл бұрын
I like using the constrictor over the clove hitch because when you tension the constrictor hitch it holds very well. I will be posting another video of the constrictor hitch being tied a different way very soon.
This can tighten enough to replace a hose clamp in an emergency repair.
@knotknut
Жыл бұрын
That is a use I never thought off
🖤💚❤😎👍👍👍
Thank you bro
Clove hitch with the free end under.
Eh, Clove hitch with a half, add a bite if you like. Won't bind.
I like using a rolling hitch, it holds well and unties easy. But I guess it might serve a different purpose.
Great demo ….good for tieing a gunny sack closed…can be hard to untie!
Muito bom
Nice
First time seeing it done this way
@knotknut
Жыл бұрын
I will do another video building it in your hands, hopefully soon.
Right! That's like someone putting their finger on it when you're tying the knot.
@knotknut
Жыл бұрын
Yes, it is. Holds a lot tighter than a clove hitch.
Simple à regarder, mais difficile à retenir.
Honestly, I think every tutorial on tying this knot should come with a major disclaimer(s): a) Once tensioned, it can't be untied, and b) don't use on any body parts!
This is called the cobra constrictor. A regular constrictor uses three wraps and comes up under the middle and locks that way
Clove hitch with extra steps
I would love to know how the very first person figured out all the kinds of knots? Was it trial and error or imagined first .
@knotknut
Жыл бұрын
Most of the knots seem to come from sailors back a few hundred years. We use coma longs, zip ties and tie down straps
@a9ball1
Жыл бұрын
@@knotknut I tend to agree with that. I was just sitting here wondering (imagining) them trying to figure out how to make a certain knot do what they want it to do 😉 . On a creaky, leaky old wooden sailing ship as it rocks back and forth while the waves are crashing over the deck.
@philrobson4287
Жыл бұрын
I heard that a British surgeon (who sailed) was using this knot in surgeries before he had ever seen any one else use it. So it may have been created by many users after playing around with the clove hitch.
@a9ball1
Жыл бұрын
@@philrobson4287 , that could have easily happened. I'm sure surgeons know more knots than I do. Heck a toddler probably knows more than me.
@stewartj3407
Жыл бұрын
His name was Wendel C. Brimblebrag. He’s the one that invented all knots ever tied.
I had trouble tying up the dinghy when I was young ! Don’t know but it could come in useful - know you knots !
oo, so that won't just come off? seems like it is not really fastened on there... what are some good uses for this knot?
A constrictor **knot** is not intended to function as a **hitch**.
Similar to a Timber Hitch.
Just tie a clove
Or just tie a clove hitch
Knut does not tell what the properties of the knots are, so what you can use the knot specifically for. I do not subscribe Knut but others
Great audio, and video quality, but this instruction is almost useless because you don't explain what it is used for, it's strengths and weakness,what other knots are applicable in its place.
@knotknut
Жыл бұрын
With short videos I have only 60 seconds, not enough time to explain uses. A lot of ppl have commented on their uses of this knot. I like to use it in the place of a clove hitch and it works well for tying bundles of pipes together.
Why dont you describe it as "first, make a clove hitch"
showing a knot without explaining its use cases is just a waste of time
Ok knot, but lousy teach. The way he moves misleads you where the open end of the rope should thread through.
This is a stupid clove hitch. And it’s also missing a safety.
não gostuei asmuei