Hello and thank you . Its been a Long time I havnt seen any Professional Video Explaining about a product ,Very Detail and accurate . Thank you Sir ,I appreciate for very good quality close up detail explaining and sharing is caring )). God Bless !

@TheThoughtfulWoodworker

Ай бұрын

Thank you so much!

I can’t thank you enough for this in-depth guide. My ancient 226 came with no manual.

@TheThoughtfulWoodworker

2 ай бұрын

Hey thanks for letting me know. Best of luck with your machine!

I'm going to save this video for future reference. I really appreciate no background music, just raw data and information on the Consew 226 with valuable reference information about other machines! Thank you!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for the kind words. Much appreciated. Best

I bought my Consew 25 years ago for $1000 .We have our own Upholstry business and use that machine 😂everyday .Never had to get it worked .Cant believe how much money this machine has made for me

@TheThoughtfulWoodworker

8 ай бұрын

Yep, they are sturdy machines!

Absolutely the best, most concise yet informative video on an industrial sewing machine!!

@thespecialtywreath

2 жыл бұрын

What Servo do you recommend for this machine? I’m looking at one now that doesn’t have a servo yet.

@TheThoughtfulWoodworker

2 жыл бұрын

Oh my goodness, you are so kind. Thank you so much!

@TheThoughtfulWoodworker

2 жыл бұрын

@@thespecialtywreath I recommend a basic variable speed servo motor with a single manual knob to adjust max speed. They are sold under several names such as Family, Tech Sew, Rex, and Consew. Here is a video of one being installed... kzread.info/dash/bejne/dqyT1LVydt3cltI.html Best of luck!

I had been looking everywhere for this. Great job! Finally wired mine up today got enough courage now to take if for a spin.

@TheThoughtfulWoodworker

2 жыл бұрын

That's great! Thanks for the nice comment.

Best video yet, thank you

@TheThoughtfulWoodworker

2 жыл бұрын

Oh thank you. You made my day! Best

Amazing video. Very clear visuals and instruction. Thankyou!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks Janet! Happy sewing.

Great Video, really clear threading instructions. thanks for all the info & tips. Just starting to use a walking foot & your guide has given me lots of confidence!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks Wendy! Glad you found something helpful. Best of luck with your machine.

Thanks for the refresher mini course. I bought a 225 about a year ago, not realizing it has no reverse. I've been used to using my new 2206RB-14-7-DD since June 2020 at my house and purchased the 225 for using at my shop but never used it yet. Today I figured I would and couldn't figure how to get the hook to grab the bobbin. I've been sewing auto upholstery since the beginning of the plandemic, 2.5 years ago. Never stitched a single piece of vinyl, or anything, prior. I'm self taught with the help of KZread and have actually finished several bench seats, a few small projects and an entire interior to a 1963 Ford Fairlane from seats, door and kick panels, B pillars, dash cover and visors. Without the assistance of people like you and other experts, who knows how long it would have taken me to be able to accomplish what I have so far. Thank you very much. Btw, I paid $80.00 for the barely used 225 with table and all! Switched to clutch with a servo. I have a total of $200.00 in the whole set up!

@TheThoughtfulWoodworker

Жыл бұрын

Thanks Michael, it's great to hear how much you've been able to accomplish.

@frankk8018

3 ай бұрын

I just got my 225 ... and I am in the same place as you when you started.

Excellent video, thank you. I also learned a lot of terminology for the various parts you talked about in a clear, understandable voice. Great!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for the kind words Dave! Best

Awesome, thank you.

@TheThoughtfulWoodworker

5 ай бұрын

Thanks mate!

Thanks! I believe I will be getting one of these machines soon and this was a TERRIFIC help as to how it works and how to thread it and where to oil it. You are still helping after over a year. And yes, it will be my 1st industrial. I hope it is a great choice for my leather endeavours!

@TheThoughtfulWoodworker

Жыл бұрын

You will like a Consew 226. Very elegant machine, and easy to operate. Best

I just bought a 226 and your video is the best by far I have found on this particular machine, thanks

@TheThoughtfulWoodworker

2 жыл бұрын

Hi Broden, that's great and thank you so much for the positive feedback. Good luck with your new machine!

Great instructional video. No fluff just information, well organized, well presented, and well recapped at the end. Thanks.

@TheThoughtfulWoodworker

Жыл бұрын

Thanks for stopping by. Such a positive comment! Thanks!

Thank you Willy

@TheThoughtfulWoodworker

8 ай бұрын

No problem Jon. Thanks!

Thank you. Very informative I just got a 206rb. And looking for all kinds of info. You really answered many questions

@TheThoughtfulWoodworker

2 жыл бұрын

Great! Thanks for saying so. You'll love that 206rb! Great machine. Best

Great thorough video. Thanks so Much!

@TheThoughtfulWoodworker

Жыл бұрын

Thanks for checking it out! Best

Thank you! I have used my machine for 39 years and you have taught me so much! No more mess ups for me.

@TheThoughtfulWoodworker

2 жыл бұрын

That's so cool! Thanks for letting me know. Best

Concise and Clear. Great refresher for those of us that only seldom use our machines. Mine is a 224-1 Needle Feed but the info you shared translates well to the 224.

@TheThoughtfulWoodworker

Жыл бұрын

Great, thank you!

I absolutely love your videos and they are very informative!

@TheThoughtfulWoodworker

Жыл бұрын

Thanks Barbara!

Thanks, I like the tip on the small pulley. Lots of good advice.

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks so much! Cheers

This was a wonderful video. Very informative, answered all my questions regarding my new machine. Thank you so much!!

@TheThoughtfulWoodworker

Жыл бұрын

That's great! I had all the same questions when I got my first walking foot. Glad it helped.

Mate, you are thoroughly thorough. Thanks.

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for watching, hope you found a tidbit somewhere that helps. Best

Great video.

The best video I have found on this machine. Well done Sir!

@TheThoughtfulWoodworker

Жыл бұрын

Thanks Rickey!

Great video. Be sewing for 35 years.

@TheThoughtfulWoodworker

6 ай бұрын

Awesome! Keep it up!

Excellent Informative Video....Thank you

@TheThoughtfulWoodworker

2 жыл бұрын

My pleasure. Thanks for checking out the 226 video.

Excellent video. Thanks so much for taking the time. I found it to be a very helpful.

@TheThoughtfulWoodworker

Жыл бұрын

Thanks for letting me know. Appreciate it. Best

ohhhh may this video was sooo helpful.. i wastch over 45 videos and this one is the best thank you

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks Star!

Ya, I been using these for a few years and this video is the very best head start for newcomers.

@TheThoughtfulWoodworker

Жыл бұрын

Thanks Doug. The 226 machine is a nice one to run.

great video and information

@TheThoughtfulWoodworker

9 ай бұрын

Thank you!

Awesome video, thanks for sharing! I like your explanation on how to thread the machine @13:14

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks Andrew! I'm impressed you made it to the 13 minute mark. Way to stick with it! Kinda a long video, but I get to rambling when it comes to walking foot machines. Best

Big thanks man! Just saved my butt trying to figure out this machine!

@TheThoughtfulWoodworker

2 жыл бұрын

Awesome! Glad something in the video was helpful. Cheers

very thorough , thanks for posting, very helpful, it helped me buy one.

@TheThoughtfulWoodworker

Жыл бұрын

Glad to hear! Thanks for letting me know.

Thanks for the video. Just picked up an older 226. This video was very helpful. Mine has the larger hand wheel than the one in the video. It came with some 21 needles so I will try them and order some 20’s. Now I just have to learn pattern upholstery. And order a servo motor. Lots of different pricing on them. Thank you

@TheThoughtfulWoodworker

Ай бұрын

Hi Josh, here's the servo I usually get... amzn.to/4bMafkn Have fun with the new machine.

You are really good. Very good Do and Don't. May God continue to bless you and your channel

@TheThoughtfulWoodworker

2 жыл бұрын

Thank you so much. I really appreciate the words of encouragement!

Thank you for sharing your knowledge to the world. Great video. I sew as well and have 2 Consew. 206 RB 2.They are great machines. Viewing from the French island St Martin in the Caribbean.

@TheThoughtfulWoodworker

2 жыл бұрын

I really like Consew 206rb machines. Very nice to sew with. Best

Wish I'd watched this a couple of years ago! So informative, thank you. I first bought a hightex cylinder arm walking foot. I've just bought a 1950s Singer 111g156 which is pretty much what seiko and consew ect copied. Your machine looks and works exactly the same. I'm restoring the singer, so your video has really helped. When I've finished the Singer it's going to be very interesting to compare sewing on a brand new Chinese machine with a 60 plus year old British machine. Both compound feed walking foot machines.

@TheThoughtfulWoodworker

Жыл бұрын

Nice! Sounds like you have a fun project in store. Best to you.

❤thank you just got a used consew so you have helped me so much

@TheThoughtfulWoodworker

10 ай бұрын

Thanks Marina! Hope you enjoy the new Consew, they're great machines. Best to you!

Awesome video

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for checking it out!

hey NICE presentation; plenty of details; thanks!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for saying so Dino! Appreciated. Best

Thank you for this video saved me time & $$$ 😌

@TheThoughtfulWoodworker

Жыл бұрын

That's great to hear! Thanks

Thanks for a great video. Learnt so much from it. I'm just starting out.

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for the nice comment! Best

Thanks!

Watch another vid from great intellectual guy,gave me servo motor answer i needed, that guy was YOU. Cheers. Great guy here ppl.....

@TheThoughtfulWoodworker

Жыл бұрын

Hey thanks mate. Always nice to hear a good word. Best.

Great presentation chief

@TheThoughtfulWoodworker

Жыл бұрын

Thanks for the positive feedback! Much appreciated.

I haven't got an industrial sewing machine, but I'd like one. If I ever get one this video will be soooo helpful!

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks for the nice comment. I do hope you get a chance to own or use an industrial machine. They are great! Best

@lizziel4876

2 жыл бұрын

@@TheThoughtfulWoodworker I can't quite believe that having only written that last comment a month or so ago, I am now the proud owner of a Seiko STW-8b, which is the same as this Consew! I only got it last night and have so far only cleaned it, but I am here again to watch this video, because, as I said before, it will be soooo helpful!!

@TheThoughtfulWoodworker

2 жыл бұрын

@@lizziel4876 that's so exciting! Have fun getting familiar with your new machine! You'll love it. Best

Thank you for super well done video. Content & delivery is A+ ! I have recently got re-inspired to get back in front of my pristine condition 226R I found on C.L. 15 yrs ago. I’m ready to give up the clutch motor, tired of the noise and lack of control. I extended the lever arm by at least 12” and put a small pulley. Still lacks consistent control and as a beginner it adds difficulty. Because I want to do this once I need your direction on what motor, brand and model would offer best results for stops and start with smooth and repeatable linear speed control. I’m certainly not out for speed so a smaller pulley is probably a must. I believe you mention a 45mm pulley you are using. Thanks again, make more videos ! I would love ones on how to make all kinds of utilitarian type projects. Bryan C

@TheThoughtfulWoodworker

Жыл бұрын

Try this video... kzread.info/dash/bejne/dqyT1LVydt3cltI.html there's a link in the description box there for the type of servo I use. I like basic analog servo's best. I always set them up with a small motor pulley. Thanks for the nice comments, and best of luck!

Thank you, I was not aware of two oiling sections.

@TheThoughtfulWoodworker

2 жыл бұрын

Glad something in the video was useful. Thanks

Best video

@TheThoughtfulWoodworker

2 жыл бұрын

Thanks Evelyn!

I don’t understand why you don’t have more views and subscribers! Your videos are Always great!

@TheThoughtfulWoodworker

Жыл бұрын

Cool, thanks for saying so. Best

Great machine. Lots of bike riders i know 30 years ago used this machine for their skins

@TheThoughtfulWoodworker

Жыл бұрын

Yes, the 226 is an oldie but a goodie. If it wasn't for the G size bobbin, I'd probably still be using it today.

226r here; got a bunch of prewound bobbins,with mine, Never knew this as im a man, with a learners permit...cheers

@TheThoughtfulWoodworker

Жыл бұрын

Have fun with your 226R. Great machine.

Great Video! with detailed instruction on Consew 226R-1 which I have. Maybe someday soon make a detailed instructional video on the Consew 255RB-3.

@TheThoughtfulWoodworker

Жыл бұрын

Good idea. Maybe I will if I get the chance. Thanks!

Muy buena makina me gusta

@TheThoughtfulWoodworker

Жыл бұрын

Gracias, es una buena máquina.

Holy cow. That was pretty damn thorough. Thanks for all of the info. I found a 226 locally for $400 and was thinking of it as my first machine.

@TheThoughtfulWoodworker

2 жыл бұрын

Hi Cliff. You bet. Hey don't think about that Consew 226 deal too long, because that's a great price! Best

@cliffarnold7463

2 жыл бұрын

@@TheThoughtfulWoodworker thanks for the reply. I was mistaken. It’s $600 and has the clutch motor… (was hoping for a servo) I’ll still mull it over.

@TheThoughtfulWoodworker

2 жыл бұрын

@@cliffarnold7463 Still not a bad deal. Figure about a hundred bucks for a new servo. Here's a video on how to install one... kzread.info/dash/bejne/dqyT1LVydt3cltI.html

Thanks so much for this, which I'm just about to watch. I have a Consew 210 with a noise in the motor as though something were touching the fan blades; a kind of very rapid 'ting' ing sound that subsides gradually to nothing on power down. I'd be incredibly grateful if you could do a vid on the 210!🙏

Great tutorial on the Consew. I am very interested in learning to sew leather and canvas and your videos on the best machines has been super helpful. Many, many, thanks. Any chance you may have had a chance to work on a Durkopp/Adler 291?. I just purchased a used machine, and am finding it very difficult to try and learn the proper setup, threading and operation of this machine by studying the online manual which is apparently designed for people familiar with the machine and the translation to english is also quite difficult! My machine had the electronic control and compressed air features removed and a servo motor installed, so it`s a strong basic walking foot machine. Thank you.

@TheThoughtfulWoodworker

Жыл бұрын

I had a couple old Adler walking foot machines years ago. They were built like tanks, and sewed like a Pfaff. Very heavy downward foot pressure that you couldn't easily adjust. These were oldies though. Good luck with the information quest!

Great video, you mentioned if machine is set right the reverse will plop back in same holes. I just picked up a 226 seems to be in good shape, but the reverse stitching is much shorter than the forward. Hoping you help explain that adjustment

@emahfam

Жыл бұрын

I found the two set screws on the bottom that adjusts where the reverse paddle starts and stops, looks like farther down the paddle travels the larger the reverse stitch but even all the way down it won’t match the forward stitch

@TheThoughtfulWoodworker

Жыл бұрын

@@emahfam Sounds like you found the right adjustment. Make small adjustments until forward matches reverse. It doesn't have to be terribly accurate, but as long as the stitches match for 3-4 holes, most people are happy.

Hi Willie! I'm having a problem with jackrabbit starts on my 226. It just seems to go from 0-100 pretty immediately. The belt isn't super taut, so I'm not sure what the problem is. Do you have any tips on what I should do? (FYI, it has the original motor, not a Servo). Thanks!

@TheThoughtfulWoodworker

2 жыл бұрын

Hi LB, I've experimented with modifications to clutch motors like greasing the friction plate and making a long lever attached to the motor and foot pedal. Unfortunately, they don't help much. I would recommend swapping it for a servo motor. The speed of your 226 has nothing to do with the sewing machine head, and everything to do with the motor. I usually install a small motor pulley as well. A 45mm pulley costs about $3 on eBay, and will slow the machine down even more. I have a servo motor install video on my channel. They're very easy to install yourself. Best!

Good video. What is a small motor pulley? I have a Brother LS2-B837 (Made in Japan) triple feed walking foot with a servo motor and digital control box. Even with a 45mm pulley I can't get the machine to run slower than 2 stitches per second. I'd like to get it to crawl at one stitch per second like your Consew. Any tips on how to slow it down?

@TheThoughtfulWoodworker

2 жыл бұрын

A 45mm pulley is a small pulley. Some electronic servos allow you to adjust the top speed, and ramp up time for slower sewing. Sometimes you'll adjust the control panel for minimum speed and it's still too fast. In that case I'd swap it for a simple dial type servo. They sew pretty slowly. If you need slower than that, you'll have to add a speed reducer. Look for any of my leather upholstery videos where I'm using a Juki LU-563. That one has a speed reducer. I also have a video on how to install a servo. Best

Great video. I am ready to start using mine again. I got frustrated due to no details videos when I got it.

@TheThoughtfulWoodworker

Жыл бұрын

Thanks for letting me know. Best of luck getting back into heavy sewing.

Woodworker, thanks for the video. Have you figured out how to equalize the forward and reverse stitch lengths if they are not the same?

@TheThoughtfulWoodworker

2 жыл бұрын

Yes, luckily that is pretty easy to adjust on the 226. Tip the head back, and actuate the reverse lever. Look at the mechanism that moves underneath the machine. You'll see two stop screws with jamb nuts. Make small adjustments on those two screws to limit the forward or reverse lever travel. That will equalize forward and reverse stitch length. Best

This is an awesome video! I just got a 226R1 in great shape. I was wondering if you know how to adjust the presser foot alignment, my machine feet seem ever so slightly angled so that the needle is to the far left of the inner presser foot hole. Is there a way to adjust the outer presser foot so its nice and straight? I'm assuming I have to loosen some clamps on that bar, but a lot going on in there and I'm struggling to find a good image or video to do it!

@TheThoughtfulWoodworker

2 жыл бұрын

I've had that happen on Pfaff's and Consews. In both cases it was defective (bent) presser feet. I would replace the feet and put a new 135x17 needle in. Do that before you make any adjustments. The main feed dog adjustment is front to back, not side to side.

@seb1363

2 жыл бұрын

@@TheThoughtfulWoodworker thanks, I’ll give it a try!

Looking for info to install a needle positioner on Consew 226. Thoughts... Ideas....?? Thanks! This video is great!! Just purchased a 226. Installed Consew servo motor. I like the control of it much better than the clutch motor that was on it.

@TheThoughtfulWoodworker

3 ай бұрын

Hopefully you installed a digital servo motor. You need that type to add a needle positioner. Otherwise it's a pretty easy mechanical add-on. A wiring harness plugs into the servo. That's why the analog servos won't accept one. Good luck with it!

Thank you sooo much! I have been trying for hours upon hours trying to wind my bobbin. The bobbins I have have no holes in them. Just a slit on the inside. I believe I have. 225. Bought it from someone who passed away. I am on a deadline to finish 3 boat cushions by tomorrow. I only have a walking foot and have to insert zippers as well. Now that I have a bobbin and thread ready I went to try to adjust the stitch length and it will only “click” on the 7. What is a good stitch length for sewing boat cushions? I have to check out your videos. I have two more vintage machines, an Elna SU and a Necchi, which I can’t remember off hand which one but it was endorsed by Sophia Loren and the first zigzag to the US I believe. All work like a charm - when working. The Necchi has a bent needle stuck in it at the moment. So I am just starting out to do boat sewing and hope I can get somewhere with this Consew. I did sew new vinyl windows in our dodger for our sailboat. I was amazed how easy it went through two 40 ml of vinyl, two layers of canvas and a strip of leather like butter! Again, thank you for the in depth video on the Consew. Now to go look up how to fix the stitch length and in depth oiling. I have been going through way too much oil. Think I’m doing it wrong. ❤

@TheThoughtfulWoodworker

2 ай бұрын

6-8 stitches per inch will be fine for vinyl. Leather needs a very long stitch length, cotton and garments use a very short stitch. Good luck with the machine!

We have talked before and I was wondering if you knew if the needle bar on a Consew 202rb is supposed to have play in it? I keep breaking needles and I'm wondering if this is why. When I start to sew the needle appears to be in the correct position but afterwards it seems to move to the left of the feed dog and presser foot hole. Thanks Again for sharing your knowledge.

This was very informative

@TheThoughtfulWoodworker

10 ай бұрын

Thanks for letting me know Kathy! Appreciate you taking the time to post a nice comment.

Would you please recommend which servo motor i should buy for a consew 226. The clutch motor is to fast for me. I use the machine for patching marine canvas and replacing zippers.

@TheThoughtfulWoodworker

2 жыл бұрын

kzread.info/dash/bejne/dqyT1LVydt3cltI.html I would recommend a basic servo with one adjustment knob like the New Tech or Family servo. Also sometimes sold as Eagle brand. Avoid the fancy electronic servos unless you need a needle positioner. Check out the video link for how to install it yourself. Best

Do you have any info on the adjustments that have to be made to get the forward and reverse to sew in the same holes that you mentioned? Cannot find a video on that for this machine. Thanks!

@TheThoughtfulWoodworker

2 жыл бұрын

Hi Brian, The forward and reverse stitch length adjustment is actually quite easy, once you know where to look. Tip the machine back and operate the reverse lever. You'll see the mechanism move up and down. There are a couple of stop screws to limit travel. One's for forward and the other for reverse. Make a small adjustment and re-test. Good luck!

@brianharrill6087

2 жыл бұрын

@@TheThoughtfulWoodworker Thanks for the info. Will try this soon.

How to tighten the stitch. Mine is not tight enough on the top. Thank you this video was very helpful.

@TheThoughtfulWoodworker

2 жыл бұрын

Try increasing bobbin tension slightly. Also make sure your needle is big enough for the thread you're using. For example I like a #19 or #20 needle for 92 weight thread. Good luck!

I purchased my machine 40 years ago after I took an upholstery class while in high school. I've used it occasionally (approximately 20-25 times since then) to work on friends and family projects. I recently retired from my profession and started upholstering vehicle seats as a hobby. When I press on the pedal, the wheel at times does not spin unless I manually start the to turn it by hand. Any thoughts on what I can do to fix that issue. My machine is supper clean since I keep it lubed and covered in my garage while it remained dormant for over 13 years since my last project.

@TheThoughtfulWoodworker

2 жыл бұрын

Take the belt off to determine if the motor is engaging properly. While the belt is off, turn the handwheel to check for resistance in the machine. Often there is a small tangle around the bobbin case that causes drag. Or it could be the belt is too loose and slipping. Good luck diagnosing it!

thread sock hahaha. I lay down the spool horizontal in a box that fits the thread spool, you can watch the thread move left to right, right to left as it is being used. No worries of the thread unwinding itself.

Could you go over how to correct timing on this machine? I had a large thread tangle that had to be cut out and once I got it all out the timing is off.

@TheThoughtfulWoodworker

2 жыл бұрын

Hi Lisa, first thing to do is check that the safety clutch didn't pop. It's the other silver button next to the stitch length button. If that's the problem, once you reset the safety clutch, it will sew normally again. If you do need to adjust timing, I would refer you to Uwe Gross and his Consew 225 video. Timing procedure is the same for the 226. The video is here... kzread.info/dash/bejne/Y6uCpLKRaMybYpc.html Best of luck!

Have really been enjoying your videos, learning a lot. I picked up a used 226 and it seems the previous owner has adjusted it so there is a lot of down pressure on the presser foot. I would like to know how to adjust that down pressure, to lighten it up - when the needle is down and feed dogs are up. Working with slippery nylon webbing which is easily misaligned and gets crushed down, when trying to pivot it 90 degrees due to the heavy down pressure. The manual talks about adjusting it, but isn't all that clear about how to do it, and the drawing is poor. Would appreciate some guidance!

@TheThoughtfulWoodworker

2 жыл бұрын

On top of your machine, locate the threading post where you would start threading it. Just behind this post you will find a screw in the head casting. Sometimes it's a black knob, and sometimes it's a screw. Either way, turning the screw clockwise increases pressure on a leaf spring for more downward pressure on the presser foot. Counterclockwise loosens pressure. If your model has a screw, it will be a small black screw head that takes a flat screwdriver. Best of luck!

@shereebye3393

2 жыл бұрын

@@TheThoughtfulWoodworker You are very kind....that was soooo obvious. Thanks for your detailed reply!

How does this handle moderate weight canvas and webbing, bag making... is it mostly built for heavy leather or can it also handle lighter projects well?

@TheThoughtfulWoodworker

5 ай бұрын

It does well with canvas and webbing. It's not going to sew silk or anything, but does great on jeans, vinyl, leather, or upholstery weight fabric. Awesome machine for home dec work like sewing pillows and cushions. Best to you.

I think my button to adjust stitch length is broke. It will only fully depress at 5 and then the wheel won’t move. Ive put oil on the top and bottom sides and pushed the button repeatedly to try to loosen it up. Is the 226R-1 not adjustable? Also…. When I sew, the fabric gathers. It’s just plain cotton fabric. It’s like the tension is too tight. Is there a bobbin adjustment? P.S. ❤ LOVE my servo motor. Now I need to learn how to use this beast. I appreciate your help.😊

@TheThoughtfulWoodworker

Жыл бұрын

The 226R-1 stitch length is adjustable. Make sure you're pressing the stitch adjustment button, and not the safety clutch button. It sounds like you're doing everything right, just turn the handwheel toward you as you hold the button down. I've had Consews and Pfaffs that I thought would never turn, but they usually do. As far as thin fabric gathering, that can be a problem. Loosen main tension and bobbin tension some. Decrease presser foot pressure for thin fabric (the knob or screw on top of the machine, just behind the guide post). Turn CCW to decrease pressure. Best of luck to you.

I ran into a heavy spot sewing a velour cushioon singer industrial sewing machine, that is pretty much like your consew and it quit picking up the bobbin thread. Any suggestions?

@TheThoughtfulWoodworker

Жыл бұрын

First guess is a bent needle. Replace the needle with the correct type and size for the thread you're sewing and try again. Best

I have the conew 206rb 3 and it has the lever in the same order as yours

@TheThoughtfulWoodworker

Жыл бұрын

Yes, at some point the lift-up lever of the 206rb-1 and rb-2 transitioned to a push-down paddle of the modern 206rb-5. Thanks for the info.

Hi. Great video. I have a used 255rb, unfortunately it sat for a while and is very dry, the handwheel cannot move the needle. Do you have a similar video for 255? The manual is difficult as it assumes a lot of knowledge and the pictures are very bad!I've put oil into the main oil reservoir (top of machine) and the well by the bobbin, not sure of other places. I see that you do read the comments and respond, so I am keeping my fingers crossed! :)

@TheThoughtfulWoodworker

Жыл бұрын

Try watching this video on oiling a 206rb-1... kzread.info/dash/bejne/lX13lrCedsXfj7w.html It's similar, and may give you some ideas where to look for the oil journals. I freed up a 40 year old Pfaff that was totally seized, so I have every confidence that you'll get it moving. Just make sure to remove the bobbin case and any loose thread. Remember to use only sewing machine oil. Best of luck!

I've got a 145c Pfaff and I broke a needle in it and I am having trouble getting the shank out is there another way to get a needle out ? It's like it's Bent or something thanks for your time any help would be greatly appreciated .

@TheThoughtfulWoodworker

Жыл бұрын

Most needle bars have a hole drilled in them. If yours has a hole, insert a needle sideways to see if you can lever the broken needle out.

What is the adjustable servo you are using? And where can I get one? And Thank You for all that you do in your videos.

@TheThoughtfulWoodworker

Жыл бұрын

Here is the adjustable speed servo I like... amzn.to/3rOIjXx It's reliable and very quiet too! Best

Thanks for the great video! It is so helpful and clear. What Servo motor kit did you use?

@TheThoughtfulWoodworker

11 ай бұрын

Thanks Christopher, I usually use this servo motor kit... amzn.to/3KPMkoG Best to you.

@christopherh4238

11 ай бұрын

@@TheThoughtfulWoodworker Thanks!!! I have a Juki LU-562 that I bought at an estate sale. I was not able to test it but, it looked well taken care of so, I made a gamble on it for $175. As I have been going through it seems to have a vibration issue at higher speeds. It seems like there should be a fine adjustment on the counter balance. I am not sure if I should invest more$$. Does your Juki LU-563 vibrate? Thanks for all the videos! They are really well done. Cheers!

@TheThoughtfulWoodworker

11 ай бұрын

@@christopherh4238 I've had vibration issues in the past. It's not specific to Juki. Usually it means the table legs aren't resting flat on the floor. Try checking that and shimming one leg if needed. I also have a servo and speed reducer, so I sew leather pretty slowly. Best to you!

I just bought one and I’m wondering what needle and thread to use to sew Leather like wallets and such things

@TheThoughtfulWoodworker

3 ай бұрын

I would recommend 92 weight bonded nylon thread and a 135x16 needle (size 19 or 20). Same needle as a 135x17 but the 16 denotes a leather point. Many good sources on eBay. Best of luck with your new machine!

How hard is it to change out the motor and what do I want to look for? Thanks Liz

@TheThoughtfulWoodworker

3 ай бұрын

Hi Liz, the motor is super easy to install. Here are my tips... kzread.info/dash/bejne/dqyT1LVydt3cltI.html Good luck with it!

I recently purchased a Consew 226. The video was very helpful. One question. Several owners of 226 machines told me to fill the pan below the machine with oil. There is no reference to this in the video or the operating manual

@TheThoughtfulWoodworker

4 ай бұрын

Sounds like you got some bad advise. The Consew 226 is not an oil bath machine like some modern garment machines. Those do have a taller oil pan underneath and would need to be filled with oil. The Consew 226 just has an oil drip pan to catch errant oil from the machine being manually lubricated. To confuse things further, a similar walking foot, the Consew 206rb sometimes has a small oil reservoir under the machine. That one is different from an oil bath, and it's just a small box with clear window that you fill with oil. It's part of the semi-automatic oiling system on some 206rb models. Those reservoirs are usually empty, apparently because not everyone knows they exist. I'm guessing that's where the confusion stemmed from. Thanks and good luck!

Could you please demonstrate about the inner and outer walking foot tension screws.

@TheThoughtfulWoodworker

10 ай бұрын

Hi Karlynn, check out this video at the 10:52 mark for adjusting the outer foot, and at the 11:39 mark for inner foot adjustment. kzread.info/dash/bejne/kXqMktt-eLKzmJc.htmlsi=emT6YRH6O9iXcBle It's a 206RB4 but adjustments are the same on the 226. Sometimes it's a knurled knob instead of a screw. Best to you.

When out looking at the 226 I just brought home, we did at first mistake the button on the right for the stitch length setting. Would this cause any issues I should know to address? It was given a few turns towards user with the right side button pressed in.

@TheThoughtfulWoodworker

9 ай бұрын

Hey Jordan. It could cause the safety clutch to disengage. As long as the presser feet move when you roll the handwheel, you should be fine. Best

@SupernovaJP

9 ай бұрын

@@TheThoughtfulWoodworker Okay good to hear, I was a little worried it would throw off the timing! Thanks a million for the quick reply 🙏

I have a chance to look at one of these soon. it has the servo motor already installed. What is one if good condition selling for these days?

@TheThoughtfulWoodworker

Жыл бұрын

Depends on availability in your area. North of $1000 in my area for a nice machine with servo. Less if it has much visible wear or needs a tune up. Best of luck with your decision!

@bigfranksworld

Жыл бұрын

@@TheThoughtfulWoodworker Thanks for the info. Guy said he bought a new machine and doesn't need two. We shall see. Will be my first machine if I buy it.

How do you increase the bobbin tension? I’m seeing the loop on the top side of my material at this time.

@TheThoughtfulWoodworker

3 ай бұрын

On top loading machines like the Consew 226, the bobbin tension screw stays in the machine (instead of popping out like other machines). If you have a small screwdriver held at an angle you can adjust it in place. Open the bobbin slide plate, and rotate the machine until two small screws on the side of the bobbin case come into view. One just holds the bobbin tension tab in place, but the other screw adjusts bobbin tension. It usually has a circular dome or depression around the small screw head. 1/4 to 1/2 turn clockwise, then retest. If you're not getting any bobbin tension, back it out a ways, and then turn it clockwise until you get adequate tension. About twice the resistance of dental floss is what you want.

@Sinkingshipleather

3 ай бұрын

@@TheThoughtfulWoodworker thanks so much! I’ll give it a try. In terms of drop down guides for the 226, do you have a recommendation? I got one off Amazon that said it fit the 226 but it definitely did not!

@TheThoughtfulWoodworker

3 ай бұрын

@@Sinkingshipleather Sorry I don't have any recommendations on drop down attachments for a 226. Might have to drill some holes (yikes!)

If we have a small motor pulley and happy with the slow speed, is there any advantage of getting the whole speed reducer setup (extra pulleys)? Would this increase the torque over just having the small motor pulley ?

@TheThoughtfulWoodworker

Жыл бұрын

I find a servo with small motor pulley very manageable. I just turn the speed down on the motor until I like how it sews. A speed reducer will add more torque and punching power, and allows you to crank up the dial on your servo motor. The one downside of a speed reducer is the machine is a little harder to turn by hand. Also, I only like box style speed reducers. Best of luck!

@JW-vx6zc

Жыл бұрын

@@TheThoughtfulWoodworker Yes I am very happy with my 45mm gear on my servo as of now ( I am not at anywhere near the max capacity of my machine). I am however just very curious to see if I am missing anything by not having a full blown speed reducer.

I really need to know how to thread my 138 pffaff properly

@TheThoughtfulWoodworker

Жыл бұрын

This may give you some hints... kzread.info/dash/bejne/lIhmlq5yYqbMfqQ.html or download a free copy of a 138 manual.

Can I use CONSEW 290 for car leather upholstery project.

@TheThoughtfulWoodworker

2 жыл бұрын

A Consew 290 is a drop feed straight stitch machine similar to a 230. It's best for drapes and light to medium weight fabric. It can handle 92 weight thread, but doesn't have a walking foot. It would probably sew two thin layers of leather together, but automotive leather upholstery involves thicker seams with piping etc. So I wouldn't recommend this machine for leather upholstery. Best

I'm a complete newbie to this and am looking to buy one. I joined the Upholstery Australia group and found someone selling one for $800AUD. I'm looking for a machine that can sew threw thick leather and be able to do other light work. I hope this is a good machine for a complete newbie like me.

@TheThoughtfulWoodworker

Жыл бұрын

It is a very good machine. Just know its limitations. It will sew up to 10mm of leather, and will also handle thinner fabric and canvas. To get a machine that will sew anything thicker, it's a lot more money, so I think the 226 is a good choice.

My belt or clutch screetches all of a sudden on my Consew 18 (circa 1968). motor runs fine. Any suggestions? Very good video by the way!

@TheThoughtfulWoodworker

2 жыл бұрын

A clutch motor spins all the time, and relies on a friction plate (usually made of cork) to transfer power to the belt and sewing machine. You can try changing the 3/8" v-belt, which are about $5 on eBay. More than likely you'll have to grease the friction plate. It's a common service where you take the clutch motor in half and add about a teaspoon of grease on the friction plate. Helps with squeaking, and makes the motor less jumpy at startup. Otherwise you can replace the motor with a servo for a little over $100. Best

@jefferylennerth9908

2 жыл бұрын

@@TheThoughtfulWoodworker Found out I did not have enough oil in the machine after sitting for an extended period of time, more than 7 years! It took some time to get fluid back into some of the journals but if finally came around. Your video on the clutch motor was great and found an additional oil port there as well that was dry. Very nice to see some good videos for my Consew Machine to learn more how to take better care as i still have the invoice when it was first bought in 1968!!! Thanks sew much!!!

Thanks so much, awesome video! How do I find out if mine is a -1 ,-2 ,-5 ?? Got her used in excellent condition… just trying to figure all the bells and whistles 😉

@TheThoughtfulWoodworker

2 жыл бұрын

Consew 206rb-1 and rb-2 have reverse levers that you lift up to activate. Rb-3 is usually more of a grey color (rather than salmon silver) and has a push down to activate reverse lever with black stitch length knob. Rb-5 can be either silver or more commonly white and made in China. Best

@sandyferguson9913

2 жыл бұрын

Do the 1 & 2 have a knob behind the lifting leaver that turns for adjusting?? Mine does… wish I could send you a pic

@TheThoughtfulWoodworker

2 жыл бұрын

@@sandyferguson9913 the Consew 206rb-1 and rb-2 have thumb screws on the reverse lever itself to adjust stitch length. Later models had a dial on the sewing machine head that you turn to adjust stitch length. Best

@sandyferguson9913

2 жыл бұрын

Thanks, I believe mine is a 1 or 2 … that’s gonna help for parts & stuff .

I have a fair amount of time on a Consew 206RB and absolutely nothing else from a previous short-term job. Familiar with not only use but a decent amount of maintenance as well. However, for some reason 206RBs seem to be unobtanium on the used market while 226s are fairly common. As much as I want what I know, I'm about tired of pulling my hair out and may give up and buy a 226. Besides the smaller bobbin, this machine looks very similar. Are there any compromises or major differences I'd find with the 226 vs a 206 besides holding less thread? Main use would be for camping/hiking equipment and clothing fabrication and modification so lots of ripstop/cordura, probably the thickest thing it would have to go through would be short lengths of layered nylon webbing. With these materials I found the 206 could pretty much punch through whatever I could reasonably fit under the feet. Is the 226 pretty much equally capable as the 206 in this way? Whether you reply or not, thanks a bunch for the video! Great way to get an quick overview of the machine.

@TheThoughtfulWoodworker

2 жыл бұрын

The 226 is very comparable to the 206rb. The reverse lever is push down to activate on the 226, as opposed to a lift lever on the 206rb. It's a little more important to hold your threads back when you start sewing on the 226. But, it's a good idea on any machine. Otherwise they will both sew 3/8" of compressed thickness. Also consider the Juki LU-563. It's like the 226 except has a huge U style bobbin, which holds double the capacity of a G bobbin. Best

@GhostlyTurtle

2 жыл бұрын

@@TheThoughtfulWoodworker Awesome, thanks for the info and quick reply! The 206s I used were all newer ones so they also had the push down reverse lever, so that'll be an easy transfer. I'll also consider the LU-563 if I spot one!

Could you be more specific about the servo motor and pulley I need to order for my Consew 226R-1? My hubby watched the install video, but it wasn't done on a consew... so he just wants to know for sure what I need to get. Thanks.

@TheThoughtfulWoodworker

Жыл бұрын

Here is the servo motor I use... amzn.to/40lgKo8 It works on Consew 226R-1 just fine. You might need a slightly different belt length, depending what size pulley was on the old motor. You can find 3/8" v belts on eBay. Odds are it will be in the 38-40" range. Best of luck!

@andreavinson3916

Жыл бұрын

@@TheThoughtfulWoodworker thank you for the quick reply. What size pulley did I need to order?

@TheThoughtfulWoodworker

Жыл бұрын

@@andreavinson3916 You can use the large pulley that comes with the motor. Or you can get a 45mm pulley like I do (eBay). The smaller the motor pulley, the slower it will sew. 45mm is about the smallest you can get. Good luck!

Is there a part of the video where you show how to install bobbin and bring up the thread?

@TheThoughtfulWoodworker

2 ай бұрын

kzread.info/dash/bejne/X52Xw9ayhKnKm7w.html I cover threading and bobbin in this video. Good luck!

@skadimons9912

2 ай бұрын

@@TheThoughtfulWoodworker thank you