Brilliant video, solved my issue with my steering wheel control not working. I disconnected every thing then reconneced from the head unit backwards aa in the video, and hey presto, it now works! Thank you.

Worried I was sent the wrong lead but this video sorted it for me. Brill , thanks guys.

Great video...... What interface do i need for a 2011 Honda Civic MK8 LHD. I have a BOSS BVCP9685A Car radio install, need to get the SWC and the original display working.

Thank you for this video! I'm waiting for my single din Sony DSX A-310 that i'm gonna fit in my 2006 Opel Astra. Glad i looked up this video.

So when connecting a jvc stereo what do I connect to the stereo the jack lead and key 1 or just the jack lead as my stereo has a jack port in the back ?

Hi guys, I got this for my E90 2011 (without factor amp). I bought an aftermarket Kenwood radio plus bass amp. Where do I connect the base amp remote? I couple the remote connector on the bass amp with the battery power. It works, but like my battery if I don't drive the car for a few days. It because the all is always powered. Thanks guys fur your help in advance.

hi can you help how do you wire a intrrface to asingle din xtron head unit that has steerwheel options and wires but dose not have a 2.5 jack input

Whitch exit du you plug the leadwire on the headunit?

Would this be the same for a 2007, Peugeot 207 should I want a double din media unit in place of the stock car stereo?

I have a 2005 Skoda Octavia 2 with the factory fitted 'premium' sound package which consists of the Audience head unit, the Lear Corp. amplifier under the passenger seat and 12 speakers (2 speakers + 1 tweeter for each door). A few days ago, I swapped out the stock HU for a Chinese android unit, but I am not getting any sound from my speakers. After a lot of searching on the internet, I know that only the stock head units (and some compatible aftermarket head units) are able to communicate with the stock amplifier. This was disappointing as I quite like the sound of the stock amp+speakers and was hoping to use it with my new HU. Any way to make the amplifier work with the new HU Here is a picture of my amplifier for reference (I am guessing this is the same Dynaudio amp that comes on VW models) so i understand that i must buy canbus som can give an order to the amp at work with i am wondering if you have this CANBUS i see that on the internet that your canbus are work it fine thesis why i ask you before i buy it my car info skoda octavia 2005 original amplifier is with sound premium Everything is working fine, just the amp cant switch on and condition can't be seen on the android multimedia stereo If I am unable to use the stock amp, what kind of amp should I be looking at getting (power, how many channels etc). Sorry if the question seems vague, but I haven't got a clue about car audio stuff All suggestions are appreciated

Hey, i need help with the installation on a civic fn2 with kenwood aftermarket unit, I fallow all the instructions but i can't make my controls work... , then another thing from the patch cable i got my 3.5 Jack connected to my stereo its that right??

Is that make any sense that you do it with or without ignition?

Where does the aux cord plug into. Does that go to the phone or to the h/u. Inquiring about 08 Saab 9-3

hi there, that cable that you honding on ( 1:37) do i need to put in ''RC IN'' on the back of the radio ? grtz

The unit is supposedly "usb upgradable." How would this work, since there are no cables supplied and none appear to be available? Also, How do I get the thing to work with the "ignition logic" on my Vauxhall? I want the radio to only turn off if I remove the key.

adapter I will need for a 2-in-1 screen without losing control from the steering wheel for Honda civic 2008 fn2

We tried for three weeks with four different car electricians and mechanics as well as calls to Halfords technical help desk (who we believe also called yourselves) to get a JVC unit to work in my Discovery3. And no matter what anyone did it wouldn't work. If anyone wants to take this on as "I'll fix it no matter what" then please feel free but all the cables that were recommended to us just don't work. Happy to work with anyone who can make it all work.

@Connects2Uk

4 жыл бұрын

Hi Nicholas, If you contact our tech department via our ticketed system support.connects2.com/tickets/technical/ or technical@connects2.com our tech team should be able to assist, C2

I have 2014 Nissan Note Acenta (Premium DIS-G) and Connect2 is installed in it. I'm wondering Connect2 in my car showing no camera button in front panel whether it supports a reverse camera input from any universal reverse camera in the market without any modification on the firmware of Conntect2.

Hello I'm not sure what is going on. I got new stereo and it has the key 1 key 2 and ground wire there but the back of the system does not have a aux input?

Awesome video man do you guys do a video on this for a Vauxhall vectra c as I’m putting a pioneer unit in an want to keep steering wheel controls or can you point me in the right direction thanks 🙏🏻 👍🏻

@Connects2Uk

2 жыл бұрын

Hi, If you find the adapter part you need on our website and look on the downloads tab. If we have a video then it will be here. If we dont you could also google the part number and see if any of our resellers have any videos. If you need any technical support please feel free to contact our support team at support.connects2.com/tickets/technical/ Thanks C2

Just set this up for my Ford Fiesta 2002 with a JVC kd-x241 car stereo and works perfectly! Thanks a lot Connects2

esto me sirve para hyundai santa fe 2014 con pioneer appradio 4?

What do I need to activate steering volume? I boutht an Kenwood DMX125DAB and I fit it on my Audi A3 2009. Please give an advice.

No me funcionaba hasta que segui este videotutorial y ahora perfecto! Gracias.

Can someone help I have a sony xav-ax3005db and I've bought this connects2 CTSVX001.2 and the universal patch lead for a vectra c is it plug and play of do I need to cut some wires and what is the key 1key 2 ground for? I also have parking brake cable from my headunit do I connect that to the patch

its works the same on the bmw ??

Extremely helpful, thank you!

@giorgi48508

4 жыл бұрын

Γειά σου Αλέξανδρε, το δοκίμασες και δουλεύει; Μήπως μπορείς να μου πεις πως λέγονται τα καλοδια κ ο ανταπτορας που χρησιμοποιεί στο βίντεο;

my phone buttons on my civic mk9 steering wheel wont work now i have added a pioneer head unit all working apart from them im using a connect 2 kit but i ended up with a spare plug with 2 wires that has no where to go and a main plug from the honda harness

Great video. Which set up would I need to fit a JVC KD-X352BT to a ford Ka Grand Prix 2012?

@Connects2Uk

5 жыл бұрын

Hi Kevin, if you contact our sales team via sales@connects2.com they will be able to talk you through all of the parts you would need as well as direct you to a stockist near you C2

This is a superb product, I've already had it in two cars :)

Hello. Clear the explanation but I have a doubt. Do I have to disconnect the car battery before doing all the installation according to these indications or if I do, it will not work? Thanks!

@Connects2Uk

2 жыл бұрын

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

hi I had brought universal Android 10inch I want to connect to my steering wheel buttons(2011 toyota yaris europ) what can I use in aftermarket

Can you please help me out...I have a Renault Laguna 2 (Phase1) 2003 and want to replace the current stock Cabasse Auditorium with 6CD changer in the front and amplifier/radio in the boot) with an aftermarket 2DIN android unit. The problem is that unlike the Tunerlist and UpdateList, I only have one single green flat 15pin connector in the front (console). Is there a wiring harness adapter available for this system? I wanted to ask this at the official Connects2 website but i'm not a dealership, so I cannot complete the form or send examples (pictures) to elaborate.

Hi my harness is already connected to the original stereo plug from my last head unit. Do I need to disconnect this & start from new as in the video or can I leave it in. I'm really struggling to unplug it. I'm changing from clarion to pioneer so I've already changed the patch lead. Thanks

@Connects2Uk

6 жыл бұрын

If you contact our technical team over at support.connects2.com our team will be able to talk you through the ideal head unit setup C2

Simply brilliant. Thanks for solving my steering wheel issue.....

I need interface for Citroen c5 2011 can you help me please

will it work with VDO units? Which lead cable to use with it?

@lenovopieroit

6 жыл бұрын

RimasRS hello VDO is same connections for grundig stereo

Hello i have a connect 2, i wold to fix in my bmw 320d with steering control, a old Grundig stereo ( modern radip with DAB), how to connect?

@Connects2Uk

6 жыл бұрын

Send a message to our technical department via support.connects2.com or visit a audio fitter near you C2

Tem como vc explicar a estação para gol g6

Hello there! I hope i Will get an answer fast as possible! :) I have paid for an lead wire, with an Jackstick, but my radio dosn’t have a place to put in the jackstick, Will it still works then?

@Connects2Uk

3 жыл бұрын

Contact our sales team via: connects2.com/Home/Contact You can do so via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

Is that patch lead only required if the car has a CAN BUS system?

@Connects2Uk

5 жыл бұрын

Hey, The patch lead is required for both analogue and Can-Bus systems, it is an integral part of allowing the car to 'talk' to the steering wheel interface C2

Thank you very much, I was going crazy!!

@Connects2Uk

3 жыл бұрын

No worries!

Hi there I tried this but still can't get the stalk to work. Thankyou Brian. ,

@Connects2Uk

5 жыл бұрын

Hi Brian, if you contact our tech team via support.connects2.com/tickets/technical/ they will be able to walk you through every step and identify any problems whilst connecting C2

What am I supposed to do with GND, KEY and KEY 2 wires from the patch lead? Bearing in mind I haven't got a clue what I'm doing?

@sorcer888

4 жыл бұрын

Nothing. If manual does not say they needed to be connected, feel free to isolate them

Thanks for your brilliant information, I have a peugeot 308 Mk1 2012 (version facelift) and I changed from the common original head unit to an Chinese android one which has to many more features include GPS, bluetooth etc etc. My problem is a bit diffrent from the video you showed, I set the cambus to my car make and model and when the unit switched on my centre dashboard control display begin blinks even If I set it up and it comes good when I change from radio station to one another it lost control and do the same start blinks again. One day I found another setting from the cambus and the display comes good it stays steady when I change the radio station or to change to a cd, but my steering controls stoped function. Any suggestions please what can I do ?

@Connects2Uk

4 жыл бұрын

Hey Simon, I would suggest getting in touch with our tech team via support.connects2.com/tickets/technical/ and they will be able to diagnose the problem for you C2

@mrwafiymw696

4 жыл бұрын

Hi Ur problem resolved already?can share here what problem? I got same issue

I have a Mazda 3 BL and pioneer z5350bt head unit. Purchased step 1 & 2 of the corresponding Aerpro harnesses, followed your video but still, steering wheel controls are not working. The head unit has a setting in the menu for steering wheel controls, but it is greyed out and I cannot select it. Do you have any other tips?

@Connects2Uk

3 жыл бұрын

Hi Nicole, Contact our tech team and they will be able to assist you via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

Any hints if I connected a JVC radio to a Freelander but no sound at all? All radio functions work on the radio but no sound.? Old radio works like it should sound wise.

@Connects2Uk

3 жыл бұрын

Hi, Could you please submit a support ticket at support.connects2.com/tickets/technical/ to get qualified help from our UK technical support team. Thank you C2

Ok. So I've bought a 2004 Audi A2 with a connects2 hands free set. I have linked up with the Bluetooth on my phone but I'm wondering which dial to press to make or receive a call ? Any advice ? Thanks. Jeremy

@Connects2Uk

3 жыл бұрын

To answer a call is normally Track Up on the steering wheel controls, see the full instructions here: www.connects2downloads.co.uk/C2/files/InstallationGuides/BluetoothA2DP.pdf C2

Im having the issue on a 2007 Mk5 Golf GTI that im getting no power to the radio itself. I bought CTSVW002.2. Any ideas?

@Connects2Uk

7 жыл бұрын

Hey, if you head on over to support.connects2.com/tickets/technical and log a ticket enquiry, our tech team will be able to help sort out any issues that you are having C2

What port on the Sony stereo do I plug the 3.5mm jack into on the back, that bit isn't clear. All I have is the mic in and a remote in?

@Connects2Uk

4 жыл бұрын

Hey, talk to our tech team via support.connects2.com/tickets/technical/ for assistance C2

@ericlindvall2359

4 жыл бұрын

how did you solve it? i got the exact same problem...

@johnscott9144

3 жыл бұрын

Same thing for myself!! Which one of the 2 ports is the right one for the 3.5jack?

Hi!I have a question:I have the adaptador mode(lCTSSA002.2) that was connected whit a Pioneer Sph-da120,but now doesnt work whit a radio that i had installed also Pioneer AVH-601EX.Its because this radio is recent model or i must install a update from 2connects?

@Connects2Uk

4 жыл бұрын

Hey Filipe, Contact our tech team and they will be able to reflash the software just in case: support.connects2.com/tickets/technical/ C2

good video!! I have a 2008 citroen c5 with its original radio (RD4) and I want to build a pioneer. What adapters do I need to lose the steering wheel controls and parking sensors? Thank you

@Connects2Uk

3 жыл бұрын

Hey Martin, For product compatibility information, please contact our sales team via: connects2.com/Home/Contact You can do so via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

What if I need to connect the cig lighter 12v constant? Where would I connect it to ?

@Connects2Uk

5 жыл бұрын

The 12 volt constant can be connected straight to a 12v fuse/battery source, or you can locate a 12v source within your wiring from the car and splice into it C2

Please help... how to connect canbus on honda crv 2013.. wire conbus 3 cable, key 1, key 2 and gnd.. bud on head unit chinese only key 1 and key 2 cable... how to connect gnd cable from canbus?? 🙏🙏

@Connects2Uk

4 жыл бұрын

Hey Abdallah, if you contact our tech team via support.connects2.com/tickets/technical/ our team will be able to advise you C2

I have the steering wheel control working before on a different unit but now I got the Kenwood 8029dabs did it right cut orange and green wire then connected the brown wire btw my car is megane Mark 2

@Connects2Uk

3 жыл бұрын

Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

What does a solid red and flashing amber light on the module mean?

@Connects2Uk

3 жыл бұрын

Hi please contact our tech team and they can advise. support.connects2.com/tickets/technical/ Thank you C2

Perfect thanks for this video. Exactly what I needed to see!!! It now works instead of the hang up button turning down the volume. This video just saved me £50 from Halfords installation. Thanks

What did you plug that jack into and why does my Kenwood system not have anywhere to plug it into

@Connects2Uk

2 жыл бұрын

For Kenwood units you only require the purple wire, the Jack is unnecessary and is only used on other stereo systems.

Hey just wanting to know what number 3 is called? It is like an adapter looking thing from the radio to the harness

@Connects2Uk

Жыл бұрын

Number 3 is your original factory wiring harness, connected to your vehicle, thanks c2

@shameelali226

Жыл бұрын

@@Connects2Uk thank for the reply but I’m talking about the other side actually. The the thing plugged into the radio and then you plug the harness into it. I’m new to this stuff so I’m really bad at explaining

someone knows why my stereo is deprogrammed every time I turn on the car and I have to re-program the controls of the steering wheel is an ibiza sport 2008

@Connects2Uk

6 жыл бұрын

If you contact our technical team at support.connects2.com/tickets/technical/ they will be able to help diagnose the problem C2

Gracias por tu esplicación

How do I find the wiring diagram for mounting on the Renault Kangoo car controller?

@Connects2Uk

3 жыл бұрын

Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

What do you do with the mint green, pink and purple loose wires

@Connects2Uk

2 жыл бұрын

These are used as head unit connections. depending on the head unit used you may use some of these leads or the 3.5mm jack connector used in this video. Thanks C2

Hi, just bought a car that has jvc touch screen. The controls om wheel work for chamging chanel but that all. Vol down turns it up, and vol up tunes another station. Ive pulled the radio and found your conmector, i removed amd reinstalled according to thos vid but still no luck. Any advice?

@Connects2Uk

5 жыл бұрын

Hey baza, Sounds like a software glitch or some kind of wiring problem, contact our tech team via support.connects2.com/tickets/technical/ and they will be able to sort the problem out for you C2

Which cable RCA goes into the audio out for a fibre optic amp Mercedes slsk r171

@Connects2Uk

3 жыл бұрын

Hi, thanks for messaging us! For any technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2

Is it safe to use when having renault clio 2015 with renault capture interface

@Connects2Uk

5 жыл бұрын

Hey, Not too sure what you mean, but for help or enquiries, contact our sales team at sales@connects2.com or our tech team via support.connects2.com/tickets/technical/ C2

I have renault megane 2 2005 . I have steering wheel command for volume but i want change for new radio i have from my old car but there i can make radio work but i have no place where to put cable from steering wheel command . But i love using it so is there som easy solution where i could duplicate with some cable to make able to connect even that command ? Thanks for any opinion

@Connects2Uk

2 жыл бұрын

Hi, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2

Hi, does the multilead.2 works with nakamichi NA3605? so far only the steering controls not working. mine is a benz w203 2003 model

@Connects2Uk

3 жыл бұрын

Hi Muhammad, Yes it works with Nakamichi head units, only Key 1 needs to be attached wiring wise and the orange and purple loops need to be severed. Contact our tech team for more help: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

You have a tutorial for the CTSFA021.2 for Fiat 500e?

@Connects2Uk

5 жыл бұрын

Hey Diogenes, If you contact our tech team via support.connects2.com/tickets/technical/ they will be able to provide you with the relevant information C2

Did wot he sed all works great except for the mode button it won't change from CD To Radio you have to do it manually on the head unit

Hi, I wonder if you could help. I have a Peugeot expert 2010. I want to put a 35mm jack plug into the stereo, I can fit it ok, but it doesn't seem to work, any ideas? many thanks Micheal

@Connects2Uk

3 жыл бұрын

For product compatibility information, please contact our sales team via: connects2.com/Home/Contact You can do so via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

Interesting. Very clear.

Hi. Unfortunately I can't make it work. I bought your adapter CTSPG017.2 on ebay (dynamic sounds). Head unit is a kenwood dmx7017dabs. Everything works apart from the steering wheel keys. I have contacted you via your website so hopefully you can help me with that problem.

@Connects2Uk

3 жыл бұрын

Thank you for your message. We're sorry to hear you are having problems with one of our products. For tech support please contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2

This may seem like stupid question but does the patch lead go into the aux on the stereo or is it a different connection? Its just mines on the front of the stereo and I see yours is on the back.

@Connects2Uk

7 жыл бұрын

Hey Lee, The patch lead will be connected to the Steering Wheel Remote port most commonly located on the back, this does look like an Aux port but it should be labelled by SWC on the head unit or just underneath/alongside C2

@leefuller3376

7 жыл бұрын

Connects2 My stereo doesn't have this port does that mean it won't work?

@Connects2Uk

7 жыл бұрын

If it isn't on the back of the actual head unit, then you might well have a bullet connector/wire that is labelled SWC C2

Have you got any adaptor for fiat qubo-fiorino 2018 made?

@Connects2Uk

5 жыл бұрын

We do have the CTSFA004.2 which is valid for Qubo's/Fiorino's (225) from 2008 onwards with the VDO head unit, more info can be seen here: www.connects2.com/Product/ProductItem/CTSFA004.2 Contact our sales team at sales@connects2.com for further detail C2

I have a 2006 discovery and not sure what adapter I need to fit a pioneer SPH DAB160DAB

@Connects2Uk

Жыл бұрын

Hi, I would suggest that you speak to our sales support team they will be able to give you advice on what options we have for your vehicle and where you can purchase the product. Please call: 01384 958 501 or email admin@connects2.com. Thank you C2

Hi, I have just fitted a Connects2 CTKFD09 with a Sony XAV-AX1005DB stereo, cannot get the steering well controls working despite trying everything. I have disconnected and reconnected multiple times but still no communication, it was erratic at first and the volume would ramp up to max so you would have to quickly turn it down and it stabilised. The headunit has an option to set SW controls up but the programming fails, I managed to get one button programmed when it went orange but then it locked up and would'nt go any further. Any advice would be appreciated, I have opened a ticket via your website but no reply as of yet.

@Connects2Uk

2 жыл бұрын

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

I have MVH-AV290BT. Do i need can bus modul so my wheel's buttons works with this multimedia?

@Connects2Uk

2 жыл бұрын

Hi iamVold, depending on the vehicle you are installing the MVH-AV290BT into our SWC interfaces automatically interact with the CANBUS systems so the buttons will continue to operate with your new headunit.

Do you have an adaptor for Saab 9-3 Auto 2005 model?

@Connects2Uk

5 жыл бұрын

Hey, I'm afraid we do not have a solution for the 2005 model C2

Hi I need advice for replacing std Toyota estima hybrid 2009 unit with aftermarket unit. Thanks

@Connects2Uk

2 жыл бұрын

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

Hi, My Jeep is SsangYong rexton 2008 i fix pioneer sph -da230dab but not working multifunction & KZread visual ,please tell me you think what happen ? ( another everything work)

@JackVinall35

3 жыл бұрын

Ssangyong😂😂😂😂😂😂😂😂😂😂😂😂😂

I got an issue for voice command and end call (work only as hold call) button not working on my Outlander sport 2015 with alpine halo 9,,can you help me?

@Connects2Uk

5 жыл бұрын

Hey Afsheen, If you contact our tech department via support.connects2.com/tickets/technical/ our team will be able to give you assistance C2

Can someone tell me about the correct positions of dipswitches in the interface CTSFA004.2 for grande punto with pioneer deh-s5000bt ? Thanks guys.

@Connects2Uk

5 жыл бұрын

Hey, If you message our technical team via support.connects2.com/tickets/technical/ they will be able to help you out C2

My Astra H 2010 has a Xtrons ( PX71OLO-B ) Aftermarket headunit fitted and the wheel controls just wont work I have taken the headunit out and tried various things but still no joy. I called in our local Halfords the other day and had a look at your product CP2-VX52 that I was told was the correct Connect2 for my car , the big problem is that the conection to my headunit will not fit. The quadlock fits but I cannot get the other end to plug into my headunit also i cannot find any type of SWC connector on the headunit for the patch lead , can you please help a very frustrated owner

@Connects2Uk

6 жыл бұрын

If you contact our technical team over at support.connects2.com they will be able to sort any problems and identify the odd connector issue, C2

Help please! Where to connect key 1 and key 2 cables on pioneer dmh-a240dab

@Connects2Uk

2 жыл бұрын

Hi Marjan, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2

Hello I want to know if I can connect one of those to a Dodge Challenger 2015

@Connects2Uk

3 жыл бұрын

Contact our sales team via: connects2.com/Home/Contact You can do so via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2

I have a CTSIZ001.2 I have tried unplugging and replugging but still won't work in my Holden Colorado 2012. can you please help. the plug and play iso unit is a Aerpro APP8ALPV if that helps

@Connects2Uk

2 жыл бұрын

Hi Janine, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

Can i connect my steering wheels controls without adaptor iso only with steering wheels controls adaptor?

@Connects2Uk

Жыл бұрын

The Steering Wheel Control Interface comes with an ISO connector on one end so you will need an ISO connection to join it with your head unit. Thanks C2

Yes, but how do I proceed when the head unit does not have a 3.5 SWC input? My head unit, the Kenwood DDX5707s, doesn't have this remote 3.5 input and the manufacturer is insisting that I can use a 3.5 adapter with bare wire ends to do it, but can't tell me which wire. The wires are labeled ambiguously, so I'm not sure if the wire labeled "remote" is the correct wire. If only it were this easy for me!

@Connects2Uk

2 жыл бұрын

Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2

@RumbleFish69

2 жыл бұрын

@@Connects2Uk It's ok, I found a solution. Thanks for responding.

Hi i have a megane 2 convertible 1.6 2005 and i bought this connection kit for steering, but is still not working ....i did exactly like in the video but still not working 😣😣what can be the probleme ??

@Connects2Uk

6 жыл бұрын

If you contact our technical support team via support.connects2.com/tickets/technical/ they will help diagnose the problem for you C2

this would possible with a santa fe 2014 and pioneer appradio 4

@Connects2Uk

4 жыл бұрын

Hey Gonzalo, You will want to look into out CTSHY005.2 or the 19.2 which can be seen on our website www.connects2.com C2

What are the products in the video? :D ty for vid anyway

@Connects2Uk

2 жыл бұрын

Hi Edvin, the products included in this video are the vehicle specific CTSLR006.2 steering wheel controls harness, the universal CTMultilead.2. To find products suitable for your vehicle feel free to visit: connects2.com/home/index Thanks C2

Hi my after market radio doesn't have jack 3.5 only RCA in and out what I have to do?

I bought CANBUS CONEKTET2, for Chinese radio, I tried to connect the chrysler 300c 2005model, I connected but there was no sound. Please tell me how to connect correctly.???

@Connects2Uk

5 жыл бұрын

Hey, Contact our technical department via support.connects2.com/tickets/technical/ and they will able to answer your queries C2

Hola que pasa si conecto en diferente orden no funciona o que o no lo reconoces la radio o los mandos del coche

@Connects2Uk

5 жыл бұрын

Hey, If you are having problems with an installation, please contact our technical team via support.connects2.com/tickets/technical/ and they will be able to assist you C2

I have a JVC KW-M560BT and it has nowhere to put this jack. I’m a bit stumped here when it comes to the multi lead

@Connects2Uk

3 жыл бұрын

Could you please submit a support ticket at support.connects2.com/tickets/technical/ to get qualified help from our UK technical support team.

Good day I have kia sportage 2014 I install an after market stereo and gets no song ,the vehicle has a built-in amplifier how to wire it

@Connects2Uk

3 жыл бұрын

Hi please contact our tech team and they can advise. support.connects2.com/tickets/technical/ Thank you C2

will it work in my sony wx-900bt?

@Connects2Uk

5 жыл бұрын

Hey Carlo, all of our stalks will work with any radio, provided that you compliment it with the correct head unit connection lead C2

CTSFO012.2 for ford fiesta 2005 triple dash is compatible for Kenwood KDC-300 UV, thank you

@Connects2Uk

7 жыл бұрын

Hey Ricardo, Yeah the CTSFO012.2 will work with that Kenwood C2

Works with original parking sensor? I see car on monitor of mi pioneer?

@Connects2Uk

3 жыл бұрын

Some products like our Infodapters will work with the original parking sensors, contact our sales team for more information via: connects2.com/Home/Contact You can do so via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2