Can you count how many times I say "Scarlett 2i2" instead of "Scarlett Solo". Ugh.

@markrichardson6461

3 жыл бұрын

I think I counted 4... Great Video! Very thorough

@antic1548

3 жыл бұрын

Please do review for Focusrite Scarlett 2i2 vs Presonus Studio 24c :D

@truecrimereaction

11 ай бұрын

Hi Jordan., is there any way to send both left and right outs from my mixer into the solo? could i just plug the headphone out into the solo with a balanced jack? would that give me both mics?

@4ervpodzabornij493

8 ай бұрын

Can somewone make a video how to conect audio interface to a mixer? I want separate outputs conect to mixer inputs meanwille recording dry signals from interface.

Thanks ! Im french and ur video is best !

Best video on how to connect mixer to interface! Every other video they only show you how to connect to interface with 2 input. Most people like me, our interface only have 1 input. Thanks Kettner Creative!

Ayyeeee This Tutorial Was Made For Me......... Thank You So Much You Are A Life Saver .... One Love From West Africa Ghana 🇬🇭🇬🇭🇬🇭

@kettnercreative

3 жыл бұрын

Glad it helped!

Thank you! This is super helpful!

Hi! Very helpful. please make video on how to connect/mix multiple mics inputs with scarlet solo with compatible mixer to record the tracks.

Awesome stream. Learned lots. Thank you. Perhaps you can do a stream with the rodecaster pro and something like dbx286s and or PreSonus Studio Channel Tube Mic Pre/Compressor/EQ. Reason.. maybe you want to have more hardware control on the Audio effects then on the RPC.

this is exactly the video I'm looking for. thanks for this excellent demonstration 👍👍 Question, is it possible to reverse the connection, from Focusrite Scarlett Solo going into the mixer?

Great! Very useful! Thanks a lot!!! I have a Steinberg UR12 (one mic and one line input) and I had to borrow an interface with 2 line inputs to record our band rehearsals in stereo (I record a different mix from the one that comes out of the speakers, panning instruments). The interface I borrowed was a Scarlett 2i4 which has a pad button that attenuates line signal by - 10dbu. I’m looking forward to buy an interface with 2 line inputs but the ones I have in mind (UR22 and Scarlett 2i2) do not have the pad button. Do you now if they will be suitable for recording full band from the mixer or may I get clipping? Thanks again and greetings from Argentina 🇦🇷 !!!

Can you do this without a balanced cable? So with a cable with only one black ring?

As always - great stuff

@kettnercreative

Жыл бұрын

Thanks again!

Thanks. What if I want to record my live performance from Yamaha mg10xu on a recorder like zoom h6? Could you explain the settings on a separate video?

In case I have available XLR from my mixer’s main output, can I choose 1 and use a DI before connecting to the XLR input of the Scarlett? I got confused with the line level out of the mixer to the mic level of the interface, thanks

well explained sir

I have a Behringer XR12 audio mixer where I have set up my mics . I have mics on inputs 1-4, 7 and 8. As I was setting them up, I was monitoring the volume control through the headphone jack and able to control the volume with the fader on each channel. It seems that everything was working great. I have the mics bussed out to BUS 1 and 2 in order to connect the Aux outputs to a Scarlett Focusrite Solo audio device. As I was monitoring the audio output of the Scarlett solo I was trying to change the volume (increase and decrease it) using the fader on the mic channel but noticed that the volume would not change. I even tried muting the channel but the audio was still going through and I was able to hear the audio from the mics. Can you help me to determine if there is a setting that I am missing?

Is there any way to get a mixer that has an XLR input to connect it to the solo via the xlr option?

Amazing and helpful video Thank you How can I connect Boss Ve-2 to my Scarlett Solo?? Please help

Sir, you are a lifesaver

If i'm using a guitar and mic hooked up to the mixer, and need to record, does the headphone go into the Solo or do i monitor the session through the headphone slot on the mixer? Hope to get a response. Thanks!

Hello, thanks for the video, it was very helpful to me, I have a question, if I connect more inputs to the mixer such as microphones, etc. other than in the interface since I only have the scarlet alone, do the effects that I use in the daw have an effect? in the entries that are not in the interface? Thanks in advance

Nice tutorial. Is there any chance you can make one on how to connect it fron de USB.?

Couldn’t you use the aux or phones output for a mono version of the stereo mix?

Found your video very helpful but I have a question. In the top right corner of the mixer there’s two main outs, main 1 out and main 2 out, can I come out from one of them to a focusrite 2i2?

Hi, do you have any videos for connecting a looping station to a scarlett solo or 2i2 to be used with obs? thanks

Just to make sure I got this correct, you can only record what is coming into the line input in mono? So if I was to record a DJ set, synth, drum machine, the mixer output (as shown in this video), basically anything going into the line input on the Scarlett Solo, it will be recorded in mono. I just canceled my Solo purchase, gotta have stereo inputs when recording. I don't sing, do podcast, or play guitar, so I don't think I would get much use from a Solo.

can you make a video for behringer umc 204 connect to mixer

Want to connect scarlet solo 3 gen. to my hi fi and passive monitors,which cables do I have to use exactly?

Please help! I need to run a mixer into my Scarlett 4i4 and have the stereo mix.

What if I am.going to sing live on youtube with the same arrangement you have displayed but don't want to use headphones.. I want monitor speaker in front of me.. which I generally do ..but some issue is there.. it hit the red mark on both scarlet and mixer often and my voice is not sounding great.. where am i going wrong...? I have scarlet solo and same yamaha mixer which I connect and I do the same wiring as u mentioned. I put aux wire from scarlet to my monitor speaker so that I ll be aware what the audience is listening. What I m missing in this arrangement?

My mixer is 15 watts so my best mic won't power up , I've hooked up a 48v box to mic and mixer then to the Solo gen3 and it's good, and also out of fear I turned on the 48v on the focus right Solo gen3 all together and I think it sounds good. Question will this damage my equipment in the long run?

please, why is wrong to connect my left keyboard channel to mic input of scarlet solo (input 1), and the right keyboard channel to instrument input (input 2) and adjust the gains accordingly?

I use the scarlett solo 2in 2out with a newly bought behringer xenyx1002fx mixer. now when i'm hooked up as you have shown on the video, I can hear myself fine using the direct monitor on the focusrite, but when I turn off the dircect monitor, I try to do a live jam with friends thru jamkazam... they cant hear me. tried everything i can think of, so I disconnect the mixer and just use the focusrite and they can hear me just fine. any ideas??? thanks and great video!

Cant you connect the Right into the XLR on the solo with a line-male XLR cable to get Stereo?

Can you use a Focusrite Solo & GoXLR to stream and have good quality audio/sound ?

Thank you so much for your instruction. If possible, please link me to another video that can connect a 2i2 v3 Focusrite with a mixer. In other words, I have a 2i2 v3 Focusrite, microphone, headphone, a webcam, an electric acoustic guitar, a mixer, and OBS software. Could you please show me how to set it up? Thank you in advance!!

Please do video for focusrite itrack solo with YAMAHA MG06X hook to iPhone 📱.Thank you 🙏

Thanks, my mixer sends a line out through a xlr cable, I am using a sound devices 442, does focusrite still need a trs cable to complete the line signal? should i get a xlr to trs cable?

What Scarlett model do you suggest to work with XENYX 802 mixer?

Can I use 1/4 IN Y Splitter Cable from the mixer to focusrite line in input?

How do I get a stereo input to vmix using the solo interface from a mixer ?

Thank you

In case of audio interface main out, where to connect it on a mixer? I have presounus audiobox ione.

can you do a video connecting this focusrite to a preamp.

Hey I have a question does this record everything like any instruments

Sir please tell us that how much is main output volume of scarlet in this video?

I connect my mixer to scarlet solo, from a track output from my mixer to scarlet solo but it has buzzy sound. Did i connect it right? Or do i need a software to tune the sound quality from the scarlet to my laptop..

Would you pls tell me what is the benifit to connect audio interface with mixture in case of live stream?

So now. How do I get the sound from my laptop into my iPhone to livestream?

Can we connect a turn table to scarlet solo or to a mixer

sorry i am new to this just want to know, since mixer has it s own gain and audio interface also hav its own gain using a condenser mic would that affect it s quality if both was set at 12 oclock gain? or it will make it louder or more hissing sound i dunno just want to know.

Great video and thanks for the explanation. Question though, does this then allow me to use two mics on the Scarlett Solo? I understand it may not be the optimal setup, but if I run one mic through a mixer that goes into the line level input of the Scarlett Solo, then run a 2nd mic directly to the XLR input, will I be able to record separate tracks for each mic?

@musicbapu11

2 жыл бұрын

I have this same question. Lmk if you find an answer!

hi can you do please a video how to connect audio mixer Depusheng DTB to the scarlet audio interface

Why not you use the RCA rec out?

How to setup a karaoke system with scarlett solo and xlr mic that I have (Shure SM58). I want to be able to sing live with KZread karaoke tracks with echo effects on the mic and stream the output as my voice + music via speaker via maybe a 2nd mic on Telegram

good vdo

Can I connect Shure sm7b + cloudlifter + Scarlett 2i2 3rd gen and this audio mixer Yamaha at the same time and plugged into my computer?

@kettnercreative

3 жыл бұрын

You sure can.

Jus came across ur vid. I was wondering how to connect a mic pre and an external compressor to the scarlet solo?

@kettnercreative

Жыл бұрын

Thanks for the comment, I will make some videos on this soon!

What happens if you plug a line level signal into the Scarlett's XLR (mic level) input?

@kettnercreative

Жыл бұрын

It will risk being distorted and peaked. You may need to turn down the output of the mixer or use an in-line XLR pad.

Can a mixer be used vice a cloud lifter with the SM7B?

@kettnercreative

3 жыл бұрын

Depends on the mixer and how much gain the preamps provide.

can you record two guitars simultaniously? with that set up? panned left and right

@kettnercreative

8 ай бұрын

Yes you can.

My line input doesn't seam to be working i tried a 3.5mm trs to 6.35mm trs and a 3.5mm trs with an adapter.

@TheCrispyChip

3 жыл бұрын

im an idiot i didn't haver the gain up but now its up all the way and its like 20 percent the volume of the source of the line input :(

Could I put wireless mics in the mixer ??? And have everything still sound normal

@Multiturmio

2 жыл бұрын

Hi, yes you can, but if you use plug-in-powered wireless mics like Röde Wireless Go mics at the same time with any phantom powered ones, you have to get VXLR+ or VXLR Pro adapters that can turn that 48V to 5V, or you have to have a mixer that can turn 48V on/off per channel. If you only use plugin-powered mics, you can leave phantom power off, and use normal VXLR adapters.

NIce video, can I use the left output from control room to do the same?

@kettnercreative

2 жыл бұрын

Yes you can!

@noeblackberry5209

2 жыл бұрын

@@kettnercreative thanks @Kettner Creative

so what if in case The Mixer Does Not Have A Phantom Power! Does That Mean The 48v On The Scarlett Solo Should Be On.

@RandyOLeary

3 жыл бұрын

Phantom power is designed to provide direct power to the condenser mic. Enabling phantom power on a device not directly connected to the mic will not work.

@kettnercreative

3 жыл бұрын

No, only the device that is closest to the mic can provide 48v for your condenser mic.

can i do this and have multiple mics plugged into the mixer?

@nocturnal101ravenous6

2 жыл бұрын

That is kind of the point I personally recommend the 2i2 and sending a stereo channel from the mixer to the interface, but, whatever your board can handle can be used with a balanced out mono and recorded in mono, or software manipulated into stereo but it's a pain. Personally Shure SM7 cloud lifted into the scarlet then use the line level to a mixer for instruments recorded in mono, 2i2 allows everything to be done in stereo as stated

Can you record multiple audio tracks at the same time like this ? @kettner creative

@kettnercreative

4 ай бұрын

No, it will just allow you to record the main mix from your audio mixer.

What if I want to send audio from computer back to mixer, for zoom meeting for example.

@kettnercreative

Жыл бұрын

If you want back/forth to an audio mixer, you're looking for a "mix minus" setup. Here's a video that will help: kettnercreative.com/audio-mixer/how-to-setup-a-mix-minus/

@adamzulfikar

Жыл бұрын

@@kettnercreative thankyou , very helpful.

@adamzulfikar

Жыл бұрын

@@kettnercreative but what if I want to use an audio interface instead an adapter. Can I use the monitor output in the scarlet solo to the mixer instead?

I did everything, the only problem is that the mic doesn't pick up on Discord (Mixer to Audio Interface) but when connected directly to the Solo, its there..just Discord

@Sparksman23

3 жыл бұрын

Yeah it’s weird for some reason Discord won’t pick up mic feed but Windows 10 built in voice recorder will. Anyway here’s what I did to resolve it for myself. Have either a XLR cable / 1/4”(TS or TRS) to XLR (Male) cable for your mic output from the mixer into the mic in on the Scarlett solo. Adjust the gain on the Scarlett Solo without phantom power. In Windows select the Scarlett Solo as default recording device and Discord should pick up your mic now.

@Multiturmio

2 жыл бұрын

Discord web site had an announcement recently for mac users that usb-connected audio interfaces, mixers or other external sound cards are not supported. I had an issue with Win7 and Win10 as well where my input was extremely low when using usb-connected Yamaha MG10XU with Röde NT1. I removed the USB, and plugged my Yamaha MG10XU from line level outputs with a y-cable (2x 6,3mm TRS to 3,5mm TRS) straight to my internal Sound Blaster line in input, and set the Sound Blaster port as line level instead of mic level (from SB Command software). Discord works now ok.

U talk plenty

please make shorter that kind of videos...

@kettnercreative

8 ай бұрын

I keep playing with it, but when I make short videos everyone complains that the video didn't answer ALL of their questions...

How do I connect my solo to my mixer and some speakers I also have an amp because the speakers are passive but I want to control them with my faders 🎚

It doesn't have a mixer in the software that you can use virtually?