Confined space rigging and rescue, ID EVAC and Harken LOCK HEAD winch.

This Is a quick Look at Rigging for rescue In a confined space. Lots others exist for different situations.
We also offer Confined space training both Low and medium risk.
We Train all IRATA levels every week in our 15 meter high indoor training centre in Sheffield. 5 minutes from the train station, and 1 hour by train from Manchester Airport.
For more information visit our website. www.access-techniques.com

Пікірлер: 10

  • @guyfulford
    @guyfulford5 жыл бұрын

    Good demonstration of different solutions for confined space access/rescue. Access Techniques demonstrating competence and awareness of new technology! Keep up the good work.

  • @robloxmaniacdanceandshake7871
    @robloxmaniacdanceandshake78715 жыл бұрын

    Could you guys do a video on how to install a Chest ascended to a harness.... Seems silly, but, it is needed...

  • @dicktophone4184
    @dicktophone41845 жыл бұрын

    Nice video. Using a Harken winch on a job right now

  • @andyvan5692
    @andyvan56924 жыл бұрын

    by the way harken makes winches for 80 ft yachts!!, so of course these will handle humans! and the twin speed is a great advantage as well.

  • @harrisonwebb1038
    @harrisonwebb10385 жыл бұрын

    Can we redirect the ASAP tail through a pro-traction and engage the teeth on the pro-traction when we need to haul and then haul through the pro-traction Instead of using two descenders?

  • @hudsonemory7496

    @hudsonemory7496

    3 жыл бұрын

    @Lorenzo Andrew Yup, have been using Flixzone for since november myself :D

  • @bernardbaquiran217
    @bernardbaquiran2175 жыл бұрын

    what is that brand or equipment name , manual winch , where we can buy

  • @kevinmadero4255
    @kevinmadero42553 жыл бұрын

    He's done a few things wrong already in the beginning of this video. One thing that he did not do was connect before he disconnect. Falling objects at heights are one of the worst things that can happen.

  • @kevinmadero4255
    @kevinmadero42553 жыл бұрын

    What time you said all that up the person in need of help my bleed out already. There's better rigging you can do in a r550 would probably do a lot better. Because you can hook a drill up to it and do it in less than half the time.

  • @wojciechmiklaszewski3541

    @wojciechmiklaszewski3541

    3 жыл бұрын

    if you watched the full video, you would have noticed the fact that the instructor mentioned a drill option with the presented setup