CONCRETE PEDESTAL | STEEL CONNECTION WORKS IN REVIT | STEP BY STEP TUTORIAL
Тәжірибелік нұсқаулар және стиль
Hi, in this video I am going to design a concrete pedestal with steel elements in the Revit tutorial. this is a step by step tutorial on steel connection and beginners can also learn steel connection works in Revit very easily. I used a concrete column with footing and then I installed steel plate and stiffener plate on it then I made holes in the base plate and then I welded the element to connect steel members and installed anchors to complete the connection of steel members with concrete members. steelworks are very easy if done in this way.
#steel #design #draw
Chapters
0:00 Intro
0:17 Hollow Vertical Column / Member
1:44 Steel Baseplate
3:15 Holes in Steel Base Plate
3:35 Stiffeners Plates
7:14 Welds or Joints
9:03 Anchors / Bolts
Patreon Page Source Family File : / 49749978
Please like the video if you enjoyed watching, you can give me your valuable suggestion in the comment section, Share this video to others.
Please subscribe to my channel it helps me a lot, and don't forget to turn-on notification and don't miss my future tutorials.
Like & follow our Facebook page.
/ drawingdesigning
For Drawing & Designing services / Freelancing works, contact us on FIVER.
www.fiverr.com/ubaidrehmanawan
Пікірлер: 17
Sir, I have finished my job with the help of your tutorials, please check the errors & guide how to make the drawing presentable.
THANKS SO MUCH MAN
Thanks a lot sir
super !
❤❤❤❤❤
Is there a way to make this an assembly? Would like to make a fabrication sheet
Sir if we make balcony railing of almunium that case vertical post bottom side we can provide plat and bolt like flanged its possible or not
@drawanddesign
Жыл бұрын
Actually bolts and nut system is made for mechanical works ... railing comes with vertical posts along with all components of course... But we will make a saperate video on railing
@maqsoodkhan2798
Жыл бұрын
Thanks sir given reply we hope your next video on this topic
Hi sir, how can I see the anchors in 3D view without hiddenwire style?
@drawanddesign
2 жыл бұрын
Go to view visibility setting and check mark 3D settings in dialogue box
It is wrong to duplicate and modify parameters, when it comes to structural steel members. You have to load the Exact Family and type, from the library, according to your need. As you have shown in 1:30, you only modified 2 of the parameters involved, where the rest remains as the original data from the original type.
Sir if only 2 bolts are required then how can we create.।। Please help
@drawanddesign
Жыл бұрын
Please give me ref image ... I will create video
I have revit 2018 version..steel tab is not there.
@drawanddesign
2 жыл бұрын
Steel tab is only visible in 2019 and above versions
@gitongahouse3245
2 жыл бұрын
down load and install 2022 check from INSTALLINg DUDE you tube channel