I've seen a couple air tank builds but your take the cake pal. The build quality is fantastic. The idea to go the next step and build a block to hold the gauge, inlet and outlet was just great. I'm so impressed I'll go and make your additions to my air tank. Keep it up pal.

legend says he's been the undefeated winner of World Annual Compressor Tank Making Competition since 2019

More than a factory made equipment !!! 👍. With ❤️ From 🇮🇳

Saustark! Perfekte Lösung auch für die Boxenausstattung.

That's a beautiful design! Really great craftsmanship! Great job!

Da kann man nur sagen: PERFEKT!!!

Great idea for Aires tank. I try to do one for me and for my small works in painting small things. When I can I restauring a kids cars and make a dioramas. For that this is perfect. Thanks for idea.

Very cool! Amazing work! I would have just stayed with the original ring base. This is something I'd keep as small and streamlined as possible

ខ្ញុំអរគុណដល់សហគមន៍ដែលបានបញ្ចូលខ្លីបល្អៗ ចែកចាយដល់អ្នកមានចំណុចខ្វះខាច សូមគេារពជូនពណ៍ដល់សហគមន៍ឲ្យការអភិវឌ្ឍល្អៗជារៀងរហូត អ្នកក្នុងជួរ មានសុខភាពល្អគ្រប់ៗរូប

Hello bạn, cảm ơn bạn hướng dẫn cách làm hay lắm 👍🤝

I had a house gas bottle and left the tap and base in place but added a proper bottle fitting and plugged it into my compressor for and extra tank by hose and fittings. Took 15 minutes

Bravo! Damn thing looks store bought!

A+ job on the tank. Something of a contradiction is the very experienced workmanship but most of those tools appeared to be new, first time use.

Great, great job. Thanks for sharing.

I was gonna go build one right now!! Then I remembered I don't have any of these tools.😟. GREAT VIDEO, REALLY ENJOYED IT. 👍

@JoaoAmadoTV

4 жыл бұрын

CRONICAS DEL PEPE , he doesn’t use many tools to be fair, maybe try something more simple to start practicing...

@muhammadyusuf5744

4 жыл бұрын

Ŕr

@AlexCamacho

4 жыл бұрын

Not many tools??? Well-built tank but dude got money... Drill press, big bore tap set, plasma cutter (air compressor for plasma cutter), MIG welder, angle grinder, table vise, hardened big bore drill bits, high end fire resistant welders overalls and gloves, and all to make a portable tank to top off the tires of his Mercedes... This isn't the average "lemme scrape around see what I have in the garage..." this is "hmmmm... I'm bored, what can I make in my shop today?" 😂🤘😎💵

@pepe_gomez

4 жыл бұрын

@@AlexCamacho that's what I was thinking!

Bro, very good job, I take my hat for you. I loved all the details, and I even watched the all video without skipping many of the parts... it would make more sense for me that this was done during Coronavirus lockdown, where we all have time to spare ... LOL

Oh my goodness...my brother made one of these about 25yrs ago!...well cool!

Holy hell. Good job amigo. Couldn't imagine mimicking your work, but sure was good tv.

Now that is impressive! Absolutely beautiful. You made your own distribution block!?! Awesome video. Love the color. Great job! Much respect from the US. Keep your videos coming

@zohrajabeen4230

4 жыл бұрын

P L l l.p.pp 0l 0 0l

Excelente trabajo, felicitaciones muy profecional y pulcro, así deberían ser todos los videotutoriales de la plataforma. 👍🏾🇨🇴💪🏾Un saludo desde Bucaramanga, Colombia.

That is a really nice job, thanks for taking the trouble to show how it should be done.

@stefandambok8731

4 жыл бұрын

Dziękujemy

@josiasalves5751

4 жыл бұрын

Muito bom demais parabéns

Tolle Idee und super Arbeit einfach klasse

@Pocher1989

2 жыл бұрын

Mich würde interessieren ob man so einen käuflich erwerben kann?

I built mine from an old Helium baloon tank much simpler. But works well since years.

Great build! Someone that actually knows how to paint with a spray can!

Excellent presentation

Saubere Arbeit gut gemacht.

@konigrollo6267

2 жыл бұрын

Interessanter Name...

I enjoyed that ....... better than a bought one . cheers

Top Arbeit 👍

Man that drill press spinning at Mach 1 is making my OCD act up LOL..

@marinvoicu5365

4 жыл бұрын

Este greșit sa suedezi pe recipient de presiune

Pas mal du tout bon boulot bravo!!

Keep up the good work...safety first.

Nice, more than what I'd do. Viewers, do not tighten pressure gauge by grasping the round housing. You will bung the thin sht mtl. There are flats for a wrench.

clean work!!!

Only pro can do this.very nice DIY tank compressor tank,i enjoyed watching your video man,keep up the good work.

I would say that is a top quality job hell of a lot better than what I have done

W la perfezione bravissimo

nice welds

nice work 👍

great job👍🏻

Просто и практично👍👍

Impressive!

...good job. I want one

Awesome job👏

אהבתי 👏👏👏👏❤️👍

Alter Schlabbe, richtig gute Arbeit!

I don’t have the tools to build this. But I do like the idea and concept.

He started welding a propane bottle, the guy next door heard a bang and saw him shooting into the air like a rocket

@arturcybulski6182

4 жыл бұрын

This is why he flushed it with water.

@julianreverse

4 ай бұрын

🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂

Buenas ideas son las que hacen falta para llevar a cabo mil y un trabajo

Nice.

Чем бы дитя не тешилось, лишь бы не плакало! :-))

ดีครับได้ความรู้ครับขอบคุณมากครับ

@hocemhadjout8992

3 жыл бұрын

دير لي تحب ..كل ما ديرها كبيرة تهز بزاف ..هذيك لي دارها تقدر تهز حتى 10 بار

That's a really good job! Greetings from Southport UK.

I made mine from an old freon tank I just added a manifold to the valve that was on the tank which also let fill the tank and shut It off so it didn't leak

cool very entertaining the problem is some of us don't have the tools to build it.

thats a lot of work but in looks great. i just bought a refillhose(?) that has no pressure reducer, cut it in half and put a air connector on to it. cost me 20 bugs for two tanks and i can convert them with only a wrench.

Impressive. Most impressive

Great tire inflator

Tank you sir for your precious lecon you are superbe ?!

Creo que es mejor comprarla NUEVA, que hacerla NO crees??, gastas menos dinero y tiempo , pero te felicito está bien hecha 👏👏👏👏👏👏👏👏

Excellent, very neat

awesome job

Beaiful work..i love it..

Welding on a pressure vessel? Wow.

nice work

And for the rest of us who don't have a machine shop, go buy one. it will be cheaper and easier.

Está bueno lo voy ha hacer tengo le pipa llena de agua jabón esto lo nesecitaba gracias excelente

Brilliant, great way to recycle an old cylinder, and create something useful and rewarding!

Awesome !

How to make a simple job very complex !!

Fantastic. Very nice.

bravo.mi daresti le misure di tutti i raccordi che hai utilizzato? Grazie

Brilliant.

Era para ser algo simples, mas se tornou algo tipo profissional. Com tantas ferramentas eu acabo desistindo do projeto.

That is awesome and looks great but what is the digital compressor tire fill device you used and what brand.

Nice tank nice video but overkill

You are my hero 😎

Nice job, but the only thing I noticed was that you ran your pipe taps in to deep. Since they are tapered, the farther you go, the bigger the thread diameter gets and you don`t get a tight seal because most fittings will screw all the way in and not "jam" up like a taper pipe is supposed to do. Still a real good job though.

Brother you are Awesome !!

Beautiful.

This must be outside the U.S. because the kits to make an air tank from a propane cylinder are readily available. This person must have some great plans. I don’t see all the trouble he’s going to do.

Super Video 👍👍👍👍👍👍👍👍

Materials,tooling,and brain ..........you are in heaven . nice job ( over kill ) . most likely no wife to bug him . lol

Fantastic!!!!!!

Nice job!!

Nice.. very clean...

Bravo.you are superb.?!

Klasse ! Habe mir sowas auch vor ein paar Jahren gebaut, Allerdings nicht so perfekt. Habe kein Fahrwerk usw. Ich habe das Orginal-Ventil rausgeschraubt und oben abgesägt das nur noch der untere Teil mit Gewinde übrig war (Messing). Das dann durchbohrt und ein Gewinde reingschnitten und ein T-Stück reingeschraubt. Daran dann Manometer + Druckluftkupplung - Fertig.... Allen Sicherheitsfanatikern sei noch gesagt das diese Gasbehälter einen Prüfdruck von 30 Bar haben, somit für Druckluftanwendungen Save sind. Manche basteln ja auch mit alten Feuerlöschern, da hätte ich Bedenken....

@derhamburgerjung8673

2 жыл бұрын

Ich wollte nur noch mal sichergehen und daher noch mal meine (eventuelle) dumme Frage: kann man wirklich das Ventil mittels einen Rollgabelschlüssel und einem Hammer so bedenkenlos, problemlos und vor allem gefahrlos demontieren? Vielen Dank schon mal im Voraus für die Info, und vorallem auch Kompliment für dieses sehr interessante und Klasse Video.

@stefanp8137

2 жыл бұрын

@@derhamburgerjung8673 : Hallo wenn Du absolut auf Sicherheit gehen willst, fülle die Flasche vorher mit Wasser, dann kann auf gar keine Fall was passieren. Zum Abschrauben habe ich einen passenden Gabelschlüssel auf den 4Kant des Ventils gesetzt und mit einem Rohr verlängert. Saß verdammt fest, da das Ganze noch zusätzlich mit einem Gewindedichtmittel (Loctite vielleich) eingeklebt war.

could have used a bit more information on the top bung what was used and how it was formed somehow I missed that part being fabricated and attached otherwise nice video

Я похожий себе делал))

An einem Druckbehälter rumzuschweißen ohne Prüfung ist halt schon grob fahrlässig.

Bravo

Sub 250 from Holland... ;))

Cool

!Nice, pls component list

Very Nice

У меня такие же руковицы только красные, вюрт

Thats sick very cool how much for one of these

Just wondering how you learnt all these things? Was it an project you did for college or a college course? It seems very well don't and you have a big selection of tools

@b4tch3r

2 жыл бұрын

I think that dude is kind of a Metallbauer. This means he learnt the stuff as part of his Internship (3 years). In Germany we call that "Ausbildung". This is just my guess, because of the way he does handle all that stuff. ;D

Really not sure is it worth the effort, so much labor in this tank.

Awsome!!! What brand and specs is the welding machine?