The lighting upgrades make that obs chevy look newer! Such an easy upgrade to breathe new life in to old, but reliable, vehicles. Great work and namaste, Jason

@AutoEdits

2 жыл бұрын

The Tahoe is becoming a very civilized commuter... LOL!

@bradc5433

Ай бұрын

Have these bulbs caused any interference with your radio reception or flicker ?

Great Video! I like the magnet trick, definitely going to use that one!

@AutoEdits

2 жыл бұрын

Glad you liked it!

Went Auxbeam on all my trucks years ago. They’ve been great! Oh, absolutely go for the 4 light relay kit. I have done them on all three OBSs I’ve owned. Driving canyons, I’ve always wanted all the lights I can get.

@AutoEdits

2 жыл бұрын

Thanks for sharing! Glad to hear all of this info!

Dude, I' ma magnetize all of my screwdriver now! As soon as I get a cool magnet to do it.

@isuguy82

11 ай бұрын

If you have an old speaker, they work well

Having previously owned a 93 suburban, I highly recommend installing that painless kit for the headlights! TOTALLY worth it! You won't regret it!

@AutoEdits

2 жыл бұрын

Thanks for the tip!

The bewildering choices we have in automotive lighting nowadays staggers me. We're no longer confined to sealed-beam non-halogen lights as we were between about 1935 and 1975. The LED lights are my favourite for their decreased draw on the alternator. Mahalo for the tutorial!

@AutoEdits

2 жыл бұрын

That is a legit observation!

You just blew my mind with the screw driver tip. I knew you could magnetize it but didn't know it could be undone

@AutoEdits

Жыл бұрын

Ha! Thanks!

Oh man! That Tahoe looks sooo much better from the first time you drove it back from Mike’s. Nice easy upgrades are very rewarding too. Thanks for another great video!

Love the Tahoe videos!

I just got an OBS Tahoe (2 door) that I'm overlanding. Glad I found this!

@AutoEdits

Жыл бұрын

Howdy and welcome!

Such a simple upgrade but such a huge difference. Great stuff as always👍🏻👍🏻

@AutoEdits

2 жыл бұрын

Thanks! 👍

Really enjoying this Tahoe build!

@AutoEdits

2 жыл бұрын

That makes one of you! 😂

Been following since you got the Tahoeverlander project. I have a '99 4 door myself. You're so thorough and I always appreciate your videos! Thanks Jason!

@AutoEdits

Жыл бұрын

Awesome! Thank you!

Best detailed video I’ve seen for led upgrade for Chevy trucks

@AutoEdits

6 ай бұрын

I appreciate that!

Good Vid, when you put the screws back in the Driver side tail lamp... I was yelling "NO WAY" how neither dropped off your screw driver. then you honestly showed how you lost one on the other side. he is mortal... Love these trucks but i always drop'em. Those turns are dope, think i may need to snag those. thanks again man.

@AutoEdits

2 жыл бұрын

😂🤘

YEAH!! The Tahoe!! This series got me motivated to get my S10 Blazer back on the road!

@AutoEdits

2 жыл бұрын

Glad to hear it!

Cool video Jason. They look great

@AutoEdits

2 жыл бұрын

Thank you!

There's a clear glass headlight housing available that really helps light output as well. Made a huge difference!

Great mechanic and great presentation. Thanks for sharing!

@AutoEdits

Жыл бұрын

Glad you liked it!

Love your channel man.

@AutoEdits

2 жыл бұрын

Thanks!

Great upgrades to any older vehicle, i used the Painless wiring harness on my 2002 1500 Silverado with great results. Ditch to ditch light spread from low beams and down road forward lighting from the high beams . It made for a great setup.

@AutoEdits

2 жыл бұрын

Good to hear this is a good one to do, thanks!

This is why I love your videos. Dude out of 20 years of working on these trucks. I never knew you could take the headlights out like that. Always thought you had to remove the grill.

@AutoEdits

7 ай бұрын

Glad to help

You are a very nice person, your illustration is quite nice and logic. Thnks

@AutoEdits

2 жыл бұрын

So nice of you. Thanks

Thank you Jason! Did my lights a while ago and about to install my painless harness (working on other electrical issues before adding the headlights to the mix) but I have hated my turn signals as they needed the relays replaced. Wasn't something that was really on my radar but seeing this video and my own progress with electrical made me just order these today.

@AutoEdits

2 жыл бұрын

Let me know how it goes!

Recently purchased a CLEAN one-owner '95 Tahoe 2-door 4x4 in beautiful Emerald Green from the original buyer! First thing I did was purchase all-new exterior lenses and replacement LED bulbs. After wasting money on a couple relays other KZreadrs claimed would work to fix hyperflashing, I stumbled across your video. Swapping both the flasher and hazard relays to the ones you recommended was THE only fix. Literally solved all my issues. Thank you for the great videos, and keep up the Tahoe content! By the way, already ordered the Belltech shocks and I am cranking the OEM front keys just 1.5". Thanks for saving me money! 😁

@AutoEdits

7 ай бұрын

Sounds like a nice rig you have there. Thanks!

I was curious about the switching leds, I did the headlights but wasnt sure if I should get the running/blinker lights as well. But after this video I will be upgrading to them for sure. Thanks for the video!!

@AutoEdits

6 ай бұрын

Glad I could help!

Im a new subscriber. My 97 Suburban is gonna look awesome after this. Thank you!

@AutoEdits

2 жыл бұрын

Thanks for the sub! Howdy!

Hi Jason, another cool video. I did LED swap on my Tahoe a couple of years ago and they're fantastic. Around same time, found a glass head lamp housing on Amazon and have no worries about lens getting hazy and yellowing. You gotta install that 4 lamp relay for the head lights. Well worth the time.

@AutoEdits

2 жыл бұрын

Thanks for the info!

I liked, subscribed and rang the bell for all notifications.. love the channel.. I have a 99' Tahoe I've been working on. So when I wanna park the Ram occasionally.. Great job brother!!

@AutoEdits

9 ай бұрын

Right on!

Thanks for the video, I need to do the same upgrades to my 96 F-150.

@AutoEdits

2 жыл бұрын

It makes such a difference!

Nice 👍

just subscribed! I have a 95 chevy suburban so you've helped me a lot!

@AutoEdits

Жыл бұрын

Awesome! Thank you!

Great video will upgrade my 98 k1500 ZL1

@AutoEdits

Жыл бұрын

Right on!

I'm turning my old Tahoe into an overland vehicle. I just subscribed, so keep those video's coming! Also I used your Amazon store to buy the LED lights upgrade.

@AutoEdits

Жыл бұрын

Awesome! Thank you!

I love LED upgrade lights, it’s so much of a no brainier shops no longer need to sell halogens…? Also, I would definitely crack on with the relay that keeps all four main headlights on full beam, more OE light, more safety at night! Keep up the good work dude, loving watching the trucks grow and develop!

@AutoEdits

Жыл бұрын

Thanks so much!

Lots of great information!! 👍Thanks for posting! #gmt400

@AutoEdits

2 жыл бұрын

Thanks so much dude!

You should've done a before and after night drive comparison. Thank u Jason.

@AutoEdits

2 жыл бұрын

It's way better.

The “famous 3057 bulbs” for the front turn signals are actually 1057/1157.

Nice upgrade on the LED lights. On the trim/bumper paint, I actually painted the grey bumpers on my PT with the same stuff and black as well, though I did more of a process, cleaning it with dish soap to remove any wax, spraying on a coating of adhesion promoter, then putting down the bumper paint. As for how long it lasts, well I've only done it twice in about 10 years, but for sure depends on how picky you are about the color (it will fade over time, and my experience in Michigan, not California).

@AutoEdits

Жыл бұрын

Thanks for this input!

Looking sharp. I've always wanted a 2 door Tahoe in that body style.

@AutoEdits

2 жыл бұрын

I do to!

@imkwuzn

Жыл бұрын

I love mine! Original owner ‘97 2door Z71/LT. Red/gray leather.

Another video. Another paycheck put to use. Love it. Did the same to mine. I have a very understanding wife. Lol. Love the video buddy.

@AutoEdits

2 жыл бұрын

That is awesome!

I could never get LED bulbs to work in the rear of my '96 Silverado so I got fed up with it after trying four different kinds of LEDs for the back brands that is. I eventually ended up ordering rear LED light fixtures from Spyder Auto and man they are super bright. I also purchased a light bar for underneath my tailgate and when I put reverse on after wiring up the reverse light it lights up at least 1 acre of my land because it is so bright. A lot of people love my tailgate stop light bar and they are amazed by how easy it was to install when I tell them. The only thing you have to do is plug it in to your towing light socket four prong but the reverse you have to hardwire into your reverse on one of your tail lights the closest one to the wires on the reverse light bar. Just a little tip for anybody that wants to use a stop light light bar underneath their tailgate. Usually the 3M tape that's on the back of that strip actually holds on very well as long as you have a couple of days to let the glue actually cure meaning you put it on and you can drive it around after installing it no problem but make sure it's not going to rain or you don't wash your vehicle for at least a couple of days to let the 3M tape bond to the truck and make sure you use some rubbing alcohol to clean the area and let it dry completely before you install the light strip so it will adhere a lot better.

Great video !!👍I recently took out my third deer with the front of mine 😖😖😖I'm gonna go ahead and replace everything, the headlight brackets also. Yours turned out great !!!👍

@AutoEdits

Жыл бұрын

Good luck!

Best thing I've done on my 97 c1500 was get glass head lights. even with the standard headlight bulbs the now clear lenses make a world of difference and other than getting broken they should stay clear and not frost over like the plastic ones. I also replaced the tail lights and the new red plastic if clearer and they seem brighter do to that. I was still having issues with some of the tail lights not working even though the bulbs were good and that seemed to be more from the "circuit board", for lack of a better term, not being snapped together well. When I pushed the tan board into the black backing board all of the bulbs started working and they haven't given me any issues in about 6 months. I usually think of the heat of incandescent tail light heat causing the issue, but it maybe that the heat causes the tan board to come lose from the black backing board more than actually the sockets enlarging and the bulbs get loose.

This looks good - would help me see better on the way home from buying your Tahoe!

@AutoEdits

2 жыл бұрын

I may take you up on this ... be ready 😂

Yup, I have the experience that if the light doesn’t work, even though new, take out the led and spin it 180° and reinstall

Never knew you Could take the headlights out like that 😮

@AutoEdits

Жыл бұрын

Yep, very easy! Glad I could help.

Cool I was thinking about doing this to my 09 f150. My oem headlamps/taillights had so much chrome trim on them so I swapped those out for black euro headlights and oem SVT Raptor taillights in the back. I was on the fence about switching to LED bulbs but not anymore!

@AutoEdits

2 жыл бұрын

Good to hear... I'm happy with these so far. The ones I put in the Ram a few years ago were awful 😂

I put those same bulbs in and in 2 of the sockets the contacts would not reach all the way. If you pushed them in they would light up but not in the locked position. I just built up the contact patch on the bulbs with solder to make them “stick out” a bit more. Inserted, twisted and locked and they worked perfect. Simple fix.

@AutoEdits

Жыл бұрын

Are you sure you didn't just have them in 180 out?

@vrwired

Жыл бұрын

@@AutoEdits Yes very sure... tried to flip them and no luck... paid close attention to that. All good in the end! They work great.

It needs to be said since it wasnt said in the video. You don't JUST buy 9005 and 9006 bulbs. You need 9005/HB3 and 9006/HB4 bulbs. All bulbs are not the same. Also I very much recommend the EP-36 relay. My truck started having hyper flash when the headlights were on and an occasional just fast flash when the aren't on. I cleaned all the sockets and checked the tail light boards and it was just a simple relay going bad after 30 years. I don't run LED's but the new EP-36 is much quieter and I get a more uniform blink which is a plus

Hi. I have a 1993 Chevrolet Silverado K3500 6.5 Turbo Diesel. 4x4 regular cab. Thank you for the video. I was able to change all lightning in front of my truck to LED. I followed your video and purchased all you recommended. Everything works and looks great. Thank you. Just a quick note about my 4 way hazzard flashers. I did buy the EP28 and EP36. For some reason my 4 way flashers were at normal speed. I did not need to use the EP28 flasher relay. Perhaps this will help someone save $21 by not needing to buy. You definitely do need the EP36 turn signal flasher to stop hyperflashing. It worked well and turn blinkers operate at normal speed. So perhaps install some LEDs first and see if your 4 way hazzards flash at normal speed. Hopefully you can same some money. Also i have a question about the taillight brakelight bulbs you recommend. Are they red in color when lit? I thought a white light works better through a red lense. If you use a bulb with red light i will give it a try. Also the rear of your truck is showing amber or orange in video. Is that from the bulb or lenses? Please explain the rear lights of truck if you get a moment. You did a great job in your video. Thank you very much for sharing.

How's the beam pattern with the new LED's in the old housings? I've always read that LED's into halogen housings produce blinding beam patterns. Would love a follow up video showing the beams of all the upgrades. Cool video!

@AutoEdits

2 жыл бұрын

I haven't been flashed yet... but I'll do some more checking.

Nice obs. I have a 2000 chevy tahoe z71/limited in blue

@AutoEdits

Жыл бұрын

That's a great year.

@Fony_turgeson

Жыл бұрын

@AutoEdits thanks. Ues sir it is. Last of the obs

Can't believe i hadn't seen this video.

@AutoEdits

Жыл бұрын

Well, I'm glad you did now!

👌

I wish there was a dual color 194 led bulb for the side markers. I can’t find one. Thinking about going led for my turn signals and side markers in my 94 Silverado. Just wish I could find a 194 that would be white like the turn signals and flash amber to match. But I guess amber will have to do while the lights are on. I still think it looks awesome. I’m going to replace the orange side markers with white frosted ones. Great detailed video.

@imkwuzn

Жыл бұрын

I’m not positive but I believe amber side markers and front blinkers are required in the front of all vehicles. I’m sure someone will correct me if I’m wrong.

Great video, i have a 96 tahoe, did headlights, turn signals and rear lights, then added the ep29 flash relay, everything works great but for some reason when running , lights on, the rear turn signals barely blink, what could cause that?

Man I did an LED swap on a 97 chevy and I ended when I got the bulbs in I had problems with certain bulbs being lit, mismatched bulbs when using the brake or depending on if your daytimes are on or headlights. I ended up getting new circuit boards, same thing, i snipped off the pigtail just today because the old one started to not work at all unless I put force behind it toward the circuit board. Also I already Che Jed my relays and fuses. I also have the ep29 relay under the dash for the hyper flash. The lights are atleast making a very good connection with my new pigtails, but on the driver side , the reverse light acts ass all of my back lights

LEDs make the truck look newer, Little effort, and the reward is lit.

@AutoEdits

2 жыл бұрын

I see what you did there… I like it

Would love to see some more death valley adventures! Maybe show the damage that the floods have done to the park when it reopens.

@AutoEdits

Жыл бұрын

I love this idea... thanks for the inspiration to go and explore that!

Dude i got the LED on the rear and put in new relay so i dont get fast flashing and when i back up my lights are damn near as bright as my headlights I LOVE IT

@AutoEdits

Жыл бұрын

Glad to hear this!

@petejones6827

Жыл бұрын

@@AutoEdits just put a new jasper 350 crate in my tahoe took 9 months to get it lol

@AutoEdits

Жыл бұрын

@@petejones6827 Hey cool! I feel that this thing will be worth a new Jasper when the time comes.

@petejones6827

Жыл бұрын

@@AutoEdits its a great motor hopefully there wont be any supply issues for you. i ordered mine right in the worst time. hay fyi a thing ive learned with mine when the 4wd actuator sticks dont get rid of the broken one take it apart and make it where there is no actuator so if it gets locked on you can have one to put on that wont work but doesnt leave a hole for dirt and grime to get into if you have to remove yours to get it out and get home without being in 4wd. or just keep a extra one in the back they aint that expensive.

@petejones6827

Жыл бұрын

mines only went out once but i thought it was good idea if it happens to me again.

Dude!!! Awesome video! I know what I am doing to my GMT400 this month! Thank you! Question: The links for the 9005 and 9006 are no longer available. Were they part of the F-Series Auxbeam line?

Hey Jason, Install that low high beam relay so your lights are on together. You won’t be disappointed. Definitely worth the effort.

@roderickbanks484

Жыл бұрын

Where exactly is the relay located. I got mine but don’t know where to install it

@gamingforlife2232

Жыл бұрын

Is that why they don’t turn on at the same time?

@aaronmartin5956

Жыл бұрын

What relay do I need to get to have the low/high beam on together?

@andrewtrujillo6266

Жыл бұрын

I spliced my wire an added a fuse housing

@jamesm568

Жыл бұрын

I will never understand why people use a relay when you can just use a diode at the harness which activates both relays.

Dude I love this build makes me want to start one but these gas prices tho

@AutoEdits

2 жыл бұрын

For real!

I really wish I could find a bumper like that for my 2000 Yukon Denali. It is such a weird year and body style to find stuff for. I think the mounts are the same but the grill and lights are different. Really need to find a clean OBS like that.

@AutoEdits

2 жыл бұрын

Buckstop makes this exact bumper for your rig! www.buckstopinc.com/products.html

Just found your channel. I’m in the process of swapping out my headlights and turn signals. The switchback lights are mint in those factory housings, love them! My question for you is the light output of the 9006-05 LED bulbs. They definitely look brighter but what does the beam pattern look like? The aftermarket ones I got when I bought my truck recently are garbage with no usable light. I want to go back to OEM housing but with LED bulbs instead of the halogens.

@AutoEdits

9 ай бұрын

Check this video kzread.info/dash/bejne/kaGow6aapJXcXZs.html

Is the bull bar removable from the bumper?

Do you know if you can get the relay block under the dash ? Mine was broke at the fire wall when I bought it . Thank you

@AutoEdits

Жыл бұрын

Look at the usual's like classic industries and such.

The way you took off the top right light with those two bolts can that work on a 98 Chevy Silverado k1500 because tired of taking off my grill ????

@AutoEdits

10 ай бұрын

I think so... it removes the entire headlight bucket.

Hi a just ordered the auxbeam headlights thanks to you. I do have a follow up question for you. Are they still running good with no issues? And how loud are the fans?

@AutoEdits

Жыл бұрын

Yes they are still great... and I can barely hear the fans over the engine standing outside the vehicle.

Hey man How were you able to get both led switch colors when you turn on your turn signals

@AutoEdits

Жыл бұрын

That's the model light bulb I installed.

hey there, link is down for high/low bulbs.can you help a brother out. tia

Hello again. I just changed the flasher relay and they work fine. Now my issue is that when I turn my lights on… they don’t blink at all.

@JingleBop

Ай бұрын

Put in some of those "ballast" resisters. They flasher relay needs some resistance to work, if everything is LED it won't provide the current draw necessary to activate the flasher.

@AutoEdits

Ай бұрын

Make sure you put the correct relay in... it must say LED on it.

We bought some of those LED lights and the driver side lights up right but the passenger side only lights up amber what do you think the problem could be?,I looked at everything.

@AutoEdits

Жыл бұрын

Try reinstalling the bulbs 180 degree turn

Just upgraded the front turn signal/running lights on my 1995 Tahoe with the JDM ASTAR 1157 switchback lights, but I only have amber (no white). Should be the same as your vehicle. Any suggestions?

@AutoEdits

Жыл бұрын

Are you sure you got these www.amazon.com/dp/B07QC4FFPV?tag=onamzjasonlew-20&linkCode=ssc&creativeASIN=B07QC4FFPV&asc_item-id=amzn1.ideas.1FNPJI3AJKMXS&ref_=aip_sf_list_spv_ofs_mixed_d_asin If so... make sure you have them installed the right polarity.

This chevy tahoe look great with led light on headlights of backup light. RIP halogen headlights

@AutoEdits

10 ай бұрын

They do work great.

😎😎😎😎

lights look awesome! What size tires are you running?

@AutoEdits

10 ай бұрын

35” here’s the video kzread.info/dash/bejne/Znx1xZahZMe1nM4.htmlsi=BkVvmrbqXeD-2gRH

I own THREE of these trucks Had my oldest one for twenty years now AND I HAD NO IDEA YOU COULD REMOVE THE HEADLIGHTS LIKE THAT!!! 😫

@AutoEdits

9 ай бұрын

I learn stuff here on you tube all the time!

I have a 99 Tahoe and I recently bought the turning signal led turn that turn from white to amber. The turning signal works just fine but white part of the led will not come on. Any idea??

@bradc5433

Ай бұрын

Did you figure it out ?

97 Chevy OBS c1500 related I’ve been chasing around this issue with my flashing hazard lights. When I press the brake pedal with the emergency lights activated; the flashers stop blinking & stay solid with my brake lights. After I let off the pedal, they continue to flash normally. I’ve replaced my flasher switch, I’ve changed relays, cleaned fuses and grounds and also replaced my brake 6-pin switch but I can’t come up with anything. Any ideas?

@tjbuck

Жыл бұрын

Thats just the way it is. Since there are no amber lights as the turn signals in the back, you really can't have the brake lights flash for hazards and then stay solid as brake lights.

This Video is great! Can't wait to upgrade. One thing, do you happen to have updated links to the Low AND High beam lights? Seems like the links are broken. Thank you I advance!!

@AutoEdits

3 ай бұрын

Hey thanks... when I get home later I check those links. That company has done that several times over the years... it's kinda frustrating.

@bradc5433

Ай бұрын

@@AutoEditsseems like that company would enjoy that you made free advertising for them.

Would there be a reason my suburban does not hyper flash? All the blinkers operate at their normal speed even though they were all changed to led like you showed. Thanks

@AutoEdits

10 ай бұрын

Your relay might be unique... just go with it LOL

I got some turn signals LEDs for my 1989 c1500 that you got on the video, when I put them in they didn’t want to cut on lmk if anyone can help on that !

@jettsmith6560

6 ай бұрын

Possibly and issue with polarity I would think, don’t know for sure though

Hi Jason, I have a 2000 OBS Tahoe and i wasn’t able to locate my flasher relay 😢

@AutoEdits

Жыл бұрын

kzread.info/dash/bejne/pJuG3LuJea-7pLQ.html

im trying to do that same thing to my obs silverado, and I used the 3157 bulbs for my rear brake/turn signal bulbs, but they don't flash at all. I was wondering if I maybe needed a resistor for it to be able to be a turn signal or if any 3157 bulb should just plug and play. any help is appreciated!

@AutoEdits

Жыл бұрын

I don't know what could be different. This install did not require any modifications other than changing the relays.

@jayhawkerg9631

Жыл бұрын

@@AutoEdits I think I took my taillights off 6 x in 2 weeks...one of my leds was not pushed all the way down...then I realized later that when you reconnected the light assembly, make sure you push that rubber or grommet all the way in evenly.....I replaced my backup lights, brake and turn signal lights on my 96 k1500 silverado....followed up with the ep 29 relay...for hyperflash...I just put in module that was on floorboard that replaced the DOT flasher relay......didn't have to pull dash down...so far so good...no hyperflash...

Does it mess up if you dont change the relay for the hyper flash it looks pretty cool when it flashes fast lol

@AutoEdits

Жыл бұрын

give it a try????

So do they work better, seen a few led headlights that were worse than factory.

@AutoEdits

2 жыл бұрын

Yeah, noticeable improvement with low beams around town. I'm happy so far.

Where do you install the relay to turn both headlights on at the same time for high beam? And, which bulbs did you use for low beam and high beam since your Amazon link doesn't work for either of those? Also, did you use red or white led bulbs for the rear brake and running lights? because in your video...the bulbs you used had black plastic casings...not red or white like the ones in your Amazon link. Thanks

@AutoEdits

5 ай бұрын

Inner fender. The bulb I installed isn't available but the one linked works great in its place.

Im having a problem with my switchbacks. Both Amber and leds are on at the same time. Ive turned it 180 degrees and they do the same thing. I also have a ep29 relay underneath my dash. What could be the issue because i cant figure it out

@AutoEdits

6 ай бұрын

Not sure, check to make sure you have the right bulbs.

How are the switchback bulbs holding up after a year? I have a 95 Suburban K1500. I am wondering if these bulbs would fit as well. The bottom connector looks different

@AutoEdits

7 ай бұрын

This is a 1995 as well so they should be identical. The bulbs I installed are holding up great and I still love the switch from clear to amber during use.

@juaniruegas3635

7 ай бұрын

will this fit a 94 gmc and will the relay work as well my turn signal blink fast.@@AutoEdits

So the size on these light bulbs also apply to my 93 chevy c1500?

@AutoEdits

6 ай бұрын

check the compatibility when you click the link.

Your parts list Amazon link for rear turn goes to a JDM red. The video shows you installing AUXBEAM. So please help. What are they???

@AutoEdits

5 ай бұрын

The links to the auxbeam store kept changing so I put a more reliable option there that will work great.

I have a 1996 Tahoe. On Amazon's part finder...it shows the two relays you installed in your 1995 won't work in mine. I searched online and it shows I need a 4-Pin EP29 Flasher Relay to fix the hyper flash problem. My question to you...since you needed two relays (EP28 and EP36) for turn signals and hazzards...do you think my 1996 takes two EP29 relays? Thanks.

@julionarvaezjr3869

4 ай бұрын

I think its only one EP29 relay underneath on the driver side

The listing you provided for the low and high beams cannot be found on amazon, can you provide the brand name please, i love the look and want them for my ‘95 silverado. Thank you🇺🇸🇺🇸🇺🇸🇺🇸

@AutoEdits

3 ай бұрын

Auxbeam

Don't forget to refresh the interior lights.

@AutoEdits

Жыл бұрын

Good call!

Hello again! I just switched out all my lights to LED’s and so far so good. The only thing is that they hum. Which doesn’t really bother me. Is there a quick fix? I can leave the humming if there will be no issue like catching my ride on fire or something. 😂 let me know thanks!!!

@AutoEdits

2 ай бұрын

There's a fan in the LED headlights.

@rmeada

2 ай бұрын

@@AutoEdits oh so it’s normal. Gotcha. Thank you sir.

Where did you get your bumper at I have a 94 2500

@AutoEdits

Жыл бұрын

kzread.info/dash/bejne/daZmmdaLc7PgctI.html

Headlight link is dead but suppose that COULD be a good thing? How are they holding up? 99 Tahoe here!

@AutoEdits

6 ай бұрын

They're amazon page has been inconsistent from the beginning but the lights in the Tahoe have performed flawlessly.

Did you post a link to buy these bulbs

@AutoEdits

Жыл бұрын

Check the description.