Thank you so much for the out of the box issues you demonstrated here, for things to look out for. I can't wait to start marking!

@BusterBeagle3D

4 ай бұрын

You are so welcome! Good luck.

Very well done and informative. 👍

Great job as always Ryan! Great to see your channel growing. Super well deserved! ;)

@BusterBeagle3D

Жыл бұрын

Thank you as always for watching!

@antonis190811

Жыл бұрын

​@@BusterBeagle3D as i dont get how kickstarter and crowdfunding campaigns work, would u back this product? in case is not fully funded whats happening.. partial refund? not the right place to ask but i think u give some straight to the point answers xD i got a small business and im planning doing some lighters- pens- whatever costumer want on site.

@qss6609

Жыл бұрын

1062 nm is Infra Red region, not in UV region.

@BusterBeagle3D

Жыл бұрын

@@antonis190811 Sorry, Not sure how I missed this. You only get charged for crowd funding campaigns if it meets it's good of fundraising and goes forward. If the campaign fails to fund you just get your money back. As for if I would personally fund it I would say if I was in the market for a fiber laser because I wanted to use it in business then I would certainly consider it. I think the machine is really nice and I really enjoyed working so if you are serious about laser metal work and you don't want to shell out more for an even more powerful machine I think it's a nice choice.

thank you for the review! there has been so little on this I was getting worried about backing it lol.

@BusterBeagle3D

Жыл бұрын

Yeah I can see how you could be worried. From what I can tell its a company that has shipped a bunch of fiber lasers mainly under the name Diaotool since 2015. They changed their name in the US market for trademark issues I have been told but you can find some data on the old name as well.

@timetempest86

Жыл бұрын

@@BusterBeagle3D !!! thank you so much for that info :)

Good name brand laser safety glasses are pretty cheap and should be considered a must with any laser.

I bought one of these to mark date codes on parts. It’s my first experience with a laser and so far it has been great. I had a couple of questions on the suitability of what I was trying to do and the computer requirements for EZ Cad 2 and their support answered my emails in a day or two.

@BusterBeagle3D

8 ай бұрын

Great to hear!

Test it cutting brass! Good to know if one can make brass parts similar to photoetched.

A really clear and informative video, thanks. I was very interested to see the 3D jaws that you printed to hold the larger diameter tumbler, is it possible to download your file, or alternatively, can you tell me where I can find one similar?

nice review!

@BusterBeagle3D

Жыл бұрын

Thank you!

Have a good holiday

@BusterBeagle3D

Жыл бұрын

Thank you! I hope you do as well.

How high of a material / project can fit under the lens and still have it focus?

Another great video. Have you tried ceramic tile, or a laser marking spray to get a dark image on a steel tumbler?

@BusterBeagle3D

6 ай бұрын

Hello. I did not try either of those things with this laser. Usually you can get a dark mark on stainless without any spray but again I haven't tried the spray.

Please could you advice which is the best for jewelry gold or silver to cut name pendant? Please appreciate your input thsnk you

Hello , is this machine can engrave or itching plexiglass plate with micro fine lines details image ? and what is the finest ( thinnest ) size of line can be engrave on plexiglass . and is the engraved line is it going to be solid line or half tone line ? Thank you

I'm looking at the 60w to do gun engraving. Would this be good for that? I assume there isn't really a function difference of the laser compared to a split unit right? The price for what you get is a pretty good deal. Also what is warranty and tech support like? I bee considering monport and cloudray.

@BusterBeagle3D

3 ай бұрын

60W should be more then enough. Split unit or a combined function pretty much the same. I personally like the combined units to save space but it's a personal choice. I have used ComMarker, Monport, EMSmart, and Gwiekie fibers and they are all good. I have also heard nothing but good things about Clouldray as well. I can't speak to any warranty or tech support as I really haven't needed any yet.

What settings or line did you use for the rust removal?

@BusterBeagle3D

Жыл бұрын

Hi. I don’t remember exactly. I just made a small box and hatched it going in opposite directions at full power. It was more of a little experiment then anything else.

Thank you so much for the review on this machine I have a question if you were to choose between these machine MONPORT 30W Which you have review on which one were you choose? I do have enough space for that one but I don't know which one is better please help.

@BusterBeagle3D

6 ай бұрын

The 30W Monport is a better more high quality machine then this 20W machine but that doesn't mean this is a bad machine. The laser source of the 30W Monport is a Racus laser while this one was a Max laser so the Racus is considered a little higher quality. Now I have only tried the 20W Commarker and have plans to test some of their higher wattage machines in the future but if it was solely a comparison between the 20W ComMarker and a 30W Monport I would take the Monport if you have the space.

@behzadhonarjou1853

6 ай бұрын

Thank you so much for the prompt replying. on Monport 30w there is also the compact one (Monport GP 30w) which on is better you think? The separate one or the compact?

@BusterBeagle3D

6 ай бұрын

@@behzadhonarjou1853 I honestly would have preferred the compact one. The other one just takes up so much room.

Nice review Ryan 👍... This Laser Engraving machine only or cuter as will ? thanks Ryan

@BusterBeagle3D

Жыл бұрын

While you may be able to cut very thin materials the machine is really intended as an engraver.

@helmyelrab6679

Жыл бұрын

Thanks gain Ryan ... Can you do Tutorial with clear acrylic .

How deep can this go in aluminum? I see a lot of references that claim 20W can just etch aluminum and should use 30W, but that'll jump price 150-200% 😬

A really clear and informative video, thanks. I was very interested to see the 3D jaws that you printed to hold the larger diameter tumbler, is it possible to download your file, or alternatively, can you tell me where I can find one similar? ( PS Can I also check that your rotary is the D69 version rather than the D80?)

@BusterBeagle3D

4 ай бұрын

HI. I actually don't have the laser anymore as I needed to make some space for other machines so I can't check the model. You can however download the file I made here. drive.google.com/file/d/10OnZQxt4QqC0y89bCM9Ds7NMRuR99eZX/view?usp=sharing

@secobaairways4585

4 ай бұрын

@@BusterBeagle3D That's really good of you, thanks very much Ryan. Please forgive the potentially dumb question but... Now that I've seen the file do I need to print 2 or 3 of them or is it just the 1?

@BusterBeagle3D

4 ай бұрын

@@secobaairways4585 You need 3.

I watched this video along with the review of the Commarker B4 MOPA laser. I will be purchasing one of these but the question is which one? A 60W B4 is about $190.00 less than a B4 30W MOPA. Is there that much of a benefit to the MOPA? I’m kind of leading towards the MOPA because through the reading that I’ve done, there are more materials that you could work with. I would appreciate your feedback on this question. Thank you.

@BusterBeagle3D

4 ай бұрын

MOPA lasers are good if you want to be able to create colors on Stainless steel or Titanium. It also has the ability to work on different types of specialty plastics as well since you can achieve powerful marks at lower heat ranges. Regular fibers can also work on plastics but this just gives you a wider range. If the colors on stainless or the specialty plastics are not important to you then you can save a lot of money with a regular fiber over a MOPA. I have another video on my channel of a 60W MOPA B4 incase you haven’t seen it.

@reidjensen569

4 ай бұрын

@@BusterBeagle3D I did watch that video, and I thought the coin that you made in honor of your grandfather was really neat! The MOPA probably has more power than I need, but I feel as I grow into it it would be better to have it and not need it then need it and not have it. I don’t think my budget would allow for a 60W MOPA and that is why I am leading towards the 30W MOPA. Is the 30W capable of all the items that you did in your review of the 60W MOPA laser?

1064nm light is not UV (ultraviolet). It is actually IR (infrared) which is also invisible

@BusterBeagle3D

Жыл бұрын

You are correct. I meant to say Infrared but messed up. Unfortunately youtube doesn't allow you to re-upload the video but I'll see if I can edit it out.

Rate ? How I got this ??

I don’t know, this is looking good right now!

@BusterBeagle3D

10 ай бұрын

Certainly not a bad machine at all.

do I need to use a fume extractor ?

@BusterBeagle3D

Жыл бұрын

I would highly recommend some sort of ventilation. I had a very powerful inline fan connected to a hose very close the engraving.

What do you think is the advantages of going with the 30w or 50w versions?

@BusterBeagle3D

4 ай бұрын

Really just how fast you can do something. If you are trying to make 3D coins for instance the 50W could do that same thing faster. That's really it.

@hopeless2390

4 ай бұрын

Thank you. I saw your video on the Mopa version do you think it is worth the price difference? @@BusterBeagle3D

@BusterBeagle3D

4 ай бұрын

@@hopeless2390 Only if you care about delicate materials or colors on stainless steel or titanium. If those don't matter to you then save thousands and go non-MOPA.

@hopeless2390

4 ай бұрын

Well i do care about the color so ill go MOPA but your saying 20W vs 30W is just a speed difference then maybe 20W is the way to go for now. @@BusterBeagle3D

@BusterBeagle3D

4 ай бұрын

@@hopeless2390 I think you will still get the same colors with a 20W that you would get with 30W. You still have to run tests per material as those things can vary from one object to the next but you should be able to get better consistency then you would with a non-mopa machine.

Can this laser be used to cut leather or plastics?

@BusterBeagle3D

4 ай бұрын

I would think yes on leather and probably on plastic if it’s thin enough although it’s not something I have tried.

I need one at work but because of the safety I need enclosed machine and so it costs 3x more.

@BusterBeagle3D

Жыл бұрын

You could probably build an enclosure for pretty cheap. I thought about making my own out of 2020 Aluminum extrusion.

@Arek_R.

Жыл бұрын

@@BusterBeagle3D People at work are really scared of lasers and don't really want anything DIY, especially that the machine is meant to be used by production people. Btw. I'm not so sure the included goggles you have are right, never seen laser protection goggles that are transparent, usually those are dark coloured.

@BusterBeagle3D

Жыл бұрын

@@Arek_R. It's a different type of wavelength, The color actually has nothing to do with the protection of the goggles. I don't know the exact model but they seem to be the same as this: www.civillaser.com/index.php?main_page=product_info&products_id=1623

@Arek_R.

Жыл бұрын

@@BusterBeagle3D General rule of thumb for me is that if those are sold be legit company and come with some paperwork to back it up then those are alright. Anything freebie included can't be trusted. Other youtuber reviewed same laser and those came with those even worse green goggles: kzread.info/dash/bejne/qpauupWehaeaj6w.html

@BusterBeagle3D

Жыл бұрын

@@Arek_R. Yeah. Those green ones were absolutely the wrong glasses for these lasers. You can tell that these are not just clear but it certainly wouldn't hurt to pick up some professional ones if you were going to be doing this all day.

I got the same one a few days ago and the USB wouldn't work so I downloaded ezcad2 but it says can't find dongle do you know how to fix this

@BusterBeagle3D

Жыл бұрын

The dongle is referring to the machine being plugged in through the USB when opening ezcad. There was a section of the setup that needed to happen where you setup the drivers for your computer to recognize your usb device. I am unfortunately away for the holidays so I can’t look it up in my manual but you may be able to find the same instructions on the company website for the same setup instructions.

Sorry I pick the option $2,599 and nothing happens I can’t see any link to buy now nor shopping cart, I’m sorry .

Would it be able to etch a PCB ?

@BusterBeagle3D

Жыл бұрын

I haven't done it myself but I have seen others do so.

@cryptoneon

Жыл бұрын

Marco has done a PCB board. Link to his vid with Contents search. kzread.info/dash/bejne/qpauupWehaeaj6w.html

I really dislike it when review videos dont include at least a expected price range,

@BusterBeagle3D

8 ай бұрын

I never really include prices because they are always in flux and can range wildly based on when you watch a review. I have seen machines vary by over $1000 in price which can make a huge difference in someone's interest in a machine. Even this machine I believe can be purchased for almost $400- $500 less then when the video came out. Also sometimes I'm not even aware of the price as these reviews can be made before the product launches and a price is set.

can you share your parameters?

Good explained it I want this pls share the price details I am at India

@BusterBeagle3D

Жыл бұрын

Hello. All of the information and links are in the description.

Where can I get this one

@BusterBeagle3D

9 ай бұрын

You can get it from their website or Amazon. amzn.to/44naH3K

What is the price of this engraver? Really interested

I went to the link to buy and is not available

@BusterBeagle3D

9 ай бұрын

I see them available on the amazon link. amzn.to/44naH3K You can also find them here: commarker.com/product/b4-laser-engraver/

@BusterBeagle3D

9 ай бұрын

If you go to the website you have to pick the options before the buy button will be active.

looking for Engraving Machine for my gun bossiness

@BusterBeagle3D

9 ай бұрын

It's a nice option. Nice and compact and very useful.

well.. i cant afford this.

Its this link still working , and they send to uk

@BusterBeagle3D

3 ай бұрын

Hello. It still should work. KZread looks like they are shortening it but it still seems to be headed to the correct spot. I tried updating it again just to be sure.