Beautiful and so helpful. If someone wanted a set of four it would take days to make them. I love how it all blends so nicely. Thank you for sharing this video.

So gorgeous....looks like ocean waves!

These are gorgeous!!!

@mwaldo97

2 жыл бұрын

Thank you so very much!

Great video

Lovely Ma’am 😍

BEAUTIFUL

It is SO important that you wear a breather. The fumes are incredibly toxic, and they will mess up your lungs permanently. Please be safe :)

Hola una consulta como se mantiene un vaso con resina, es decir. Que cuidados y como se limpian cuando es usado

Hi! Great video! Beautiful!! Have you ever had a problem with the resin popping off? I realize these should be hand wash only. I have not ever had that happen but it was brought to my attention that it can. do you have any thoughts on this?

@mwaldo97

2 жыл бұрын

I have not experienced this, but it could potentially happen

@tammywoodslonepalmcreates3532

2 жыл бұрын

Thank you!

Does the resin leave a noticeable edge/line near the top of the glass where you didn’t put any?

@mwaldo97

2 жыл бұрын

Yes, there is a ridge

Lovely glass! I am going to try this! Do you put a finish layer of epoxy or is it done after the ink goes on?

@waldogermanshepherddogssud2005

2 жыл бұрын

Hi Trudy. You sure could, but I do not.

@debbyd4073

3 ай бұрын

I'd say yes,a final seal coat cause you've added inks or whatever. Really helps to make it safer.

I really love this. I tried a similar thing after watching this, but I found my inks really faded after only a couple of weeks. Did I buy cheap inks, or is this something that happens?

@mwaldo97

Жыл бұрын

Goodness, I don't know. I've had at least one sitting in the sun and heat for well over a year that still looks good, so perhaps it was the inks. When you say you did something similar, you did use resin, correct?

@judithwestby6492

Жыл бұрын

@@mwaldo97 Yes, that's right. I pretty much followed you step for step BUT I am very new to resin so I was using some cheap inks I got off Amazon. Not the Pinata ones that you did. I wonder if that made a difference? I was gutted, I loved what I made and now it's just this hidous smudgy pinky colour. Fortunately it was just a cheap Ikea vase I practised on. :)

Do you have a supply list. I really like how you make these

@mwaldo97

2 жыл бұрын

I use a 2 part resin, alcohol inks and a torch for heating up the resin.

where do you get that machine that turns the glass around?

@mwaldo97

3 жыл бұрын

This one I ordered from Amazon.

@CS-vs3ey

2 жыл бұрын

@@mwaldo97 whats d name of d machine?

Do you put any more layers of resin after that?

@mwaldo97

3 жыл бұрын

No, just the one layer

@halimabronson8817

3 жыл бұрын

@Moments with Missa and with only one layer you can wash the glass repeatedly without messing it up?

@mwaldo97

3 жыл бұрын

@@halimabronson8817 It hasn't messed up yet. If you don't feel comfortable with just one, you could always add more.

@halimabronson8817

3 жыл бұрын

@@mwaldo97 thank you hun

@mwaldo97

3 жыл бұрын

@@halimabronson8817 no problem! Feel free to reach out any time you have any questions.

How do you fix if you end up with a bare spot?

@mwaldo97

3 жыл бұрын

You could add another layer of resin later, but I think it would make it too thick.

Do you put a clear coat on top?

@mwaldo97

2 жыл бұрын

I typically do not.

What kind of resin do you use?

@waldogermanshepherddogssud2005

3 жыл бұрын

Hi Kathy, I believe at the time I was using art n glow resins. Right now I'm using ALE (a little extra) and loving it.

Can you tell me what the machine is called please that turns the glass

@mwaldo97

2 жыл бұрын

It's a cup turner.

Have you ever sprayed or sprites your cup with alcohol? You will be surprised by the results.

@mwaldo97

3 жыл бұрын

Yes, I tried for removing microbubbles and it left fishes. I'm not a fan at all.

What is the resin mixed with

@mwaldo97

3 жыл бұрын

Alcohol inks are dripped into the resin

How much resin do you use?

@waldogermanshepherddogssud2005

2 жыл бұрын

I typically make up about 10ccs. Don't always use it all. I just use enough to get a nice layer on the area of the cup I want covered.

you probably know this, but a heat gun works nicely with resin/inks

@mwaldo97

2 жыл бұрын

We live in an old farmhouse on a gravel road and battle dust constantly. The heat guns blow dust particles into the resin so my preference is the torch.

I tried this but it all just dropped straight off, what did I do wrong

@waldogermanshepherddogssud2005

Жыл бұрын

Hi Helen, I'm sorry you had trouble with your project! It's hard saying what happened there. Did you have it on a cup turner that spun fast enough to keep the resin on the cup? Did you make sure to measure both parts of your resin according to the instructions on the resin you used? Did you give it the appropriate amount of time to cure before stopping the cup turner? Those are just a few ideas I can think of that might help troubleshoot.

@helenmiller7753

Жыл бұрын

@@waldogermanshepherddogssud2005 Not sure how fast the cup turner needs to go??.. I think I measured the resin properly, I'm new at this, !.. the resin started dripping off when I added the drops of dye

@waldogermanshepherddogssud2005

Жыл бұрын

@@helenmiller7753 without being able to see what happened, it's really hard to tell from here. It's possible that your cup turner is too slow. It's possible that you put so much resin on the cup that it couldn't hold it all. To test your cup turner, I would just place a drop of water on a cup (while it's spinning) and watch it. It should make the drop of water stay on the cup as the cup goes around. If it drips off, your turner is likely too slow. I had a friend who had this issue with the cup turner she purchased. If the water drip stays on the cup, I would guess that perhaps it was just too much resin.

@helenmiller7753

Жыл бұрын

@@waldogermanshepherddogssud2005 Thank you, I didn't clean the glass first, so I will try again later, thank you for your tips and help

So much of this could've been sped up...we don't need to watch 6 mins if u torching

@waldogermanshepherddogssud2005

2 жыл бұрын

Thank you so much. There’s also fast forward! 🤣

@debbyd4073

3 ай бұрын

You don't have to be a jerk ither but there you are😂