Good job! I can't wait to see the leather sheath. (If you make one)
@Tyrant96 Жыл бұрын
Sweet looking blade
@indianprepper2478 Жыл бұрын
This is my gevr8 knife , Good job
@francescopontiggia2929 Жыл бұрын
Bello davvero complimenti👌👍👍👍👍👍👍🤙
@adamsifford62283 ай бұрын
I can't get my scales apart , everyone complains they loosen up. 😅
@requiscatinpace7392 Жыл бұрын
I used Nitro-Mors paint stripper on my CS Shanghai Shadow, the coating just fell off.
@Xander_Park2 жыл бұрын
That's pretty awesome, makes me want to send you mine so you can do the same lol
@TheJKDGuy2 жыл бұрын
Awesome 😎 💪🔪❤️
@InGratitudeIam Жыл бұрын
Since the blade isn't stainless, that paint you removed does help to inhibit rust.
@escapetherace1943
Жыл бұрын
rust is soul
@ap0lmc Жыл бұрын
Dud you mod a Recon Tanto VG1?
@dragonslayer88122 жыл бұрын
Does the factory sheath still have good retention after removing the top guard?
@jasonolbinski9333
2 жыл бұрын
Not as much but I think enough
@tlbfarm44732 жыл бұрын
Ok seriously, can you comment on how sharp it can get and it's edge retention. 1055 is a pretty tough steel; not convinced it's good for a cutting blade yet.
@jasonolbinski9333
2 жыл бұрын
I can’t tell you how sharp it’ll get, you can get any knife razor sharp but it’s how well it holds the edge. Honestly this knife doesn’t hold an edge well, in my opinion it’s good for a beater knife.
@adamsifford62283 ай бұрын
Does everyone use that music?
@Slay_No_More Жыл бұрын
That leather belt loop is amazing, do you sell those? I want one for my drop forged cold steel Bowie with securex case.
@jasonolbinski9333
Жыл бұрын
No I don’t sell them sorry.
@Slay_No_More
Жыл бұрын
@@jasonolbinski9333 I managed to get a guy on ebay to craft me an almost identical set up, he made it work on the factory sheath too, thanks for replying though!
@violator3948 Жыл бұрын
Хорошая работа!))
@JesusKing11052 жыл бұрын
Looks awesome! Mine's not stamped GI Tanto. Is this an older version?
@jasonolbinski9333
2 жыл бұрын
Not sure
@Fialajepica
10 ай бұрын
Somalishes manifactory
@vladimirkovacevic16562 жыл бұрын
you could've used 150 sandpaper it would be faster
@tlbfarm44732 жыл бұрын
TERRIBLE video!!!!! I should have never watched it!!!! NOW I want one!!!! CRAP!!!!!!. 🤣
@jasonolbinski9333
2 жыл бұрын
Excellent!
@tlbfarm4473
2 жыл бұрын
@@jasonolbinski9333 Up Yours Buddy! You made me buy one! Crap!!!!!!
@jasonolbinski9333
2 жыл бұрын
@@tlbfarm4473 you’re welcome
@RexRenart Жыл бұрын
This my first knife and this is a shitty knife.
@ap0lmc
Жыл бұрын
Well it's damn ugly but it throws great.
@barbourlmilan117310 ай бұрын
bllo lo compro ottobr ellowennnnnnnnnnnnnnnnnnn
@samthai81810 ай бұрын
Is this made in China? Alot of people have had their coldsteel Chinese knives break quite easily.
Пікірлер: 39
“Pull up on the internet” had me laughing
It looks very slick without that black coating..
That's some cool stuff. Nice job man!
I love my GI Tanto...
Well done, love the new sales Jason. 5 star.
@jasonolbinski9333
2 жыл бұрын
Thanks
Good job
Good job! I can't wait to see the leather sheath. (If you make one)
Sweet looking blade
This is my gevr8 knife , Good job
Bello davvero complimenti👌👍👍👍👍👍👍🤙
I can't get my scales apart , everyone complains they loosen up. 😅
I used Nitro-Mors paint stripper on my CS Shanghai Shadow, the coating just fell off.
That's pretty awesome, makes me want to send you mine so you can do the same lol
Awesome 😎 💪🔪❤️
Since the blade isn't stainless, that paint you removed does help to inhibit rust.
@escapetherace1943
Жыл бұрын
rust is soul
Dud you mod a Recon Tanto VG1?
Does the factory sheath still have good retention after removing the top guard?
@jasonolbinski9333
2 жыл бұрын
Not as much but I think enough
Ok seriously, can you comment on how sharp it can get and it's edge retention. 1055 is a pretty tough steel; not convinced it's good for a cutting blade yet.
@jasonolbinski9333
2 жыл бұрын
I can’t tell you how sharp it’ll get, you can get any knife razor sharp but it’s how well it holds the edge. Honestly this knife doesn’t hold an edge well, in my opinion it’s good for a beater knife.
Does everyone use that music?
That leather belt loop is amazing, do you sell those? I want one for my drop forged cold steel Bowie with securex case.
@jasonolbinski9333
Жыл бұрын
No I don’t sell them sorry.
@Slay_No_More
Жыл бұрын
@@jasonolbinski9333 I managed to get a guy on ebay to craft me an almost identical set up, he made it work on the factory sheath too, thanks for replying though!
Хорошая работа!))
Looks awesome! Mine's not stamped GI Tanto. Is this an older version?
@jasonolbinski9333
2 жыл бұрын
Not sure
@Fialajepica
10 ай бұрын
Somalishes manifactory
you could've used 150 sandpaper it would be faster
TERRIBLE video!!!!! I should have never watched it!!!! NOW I want one!!!! CRAP!!!!!!. 🤣
@jasonolbinski9333
2 жыл бұрын
Excellent!
@tlbfarm4473
2 жыл бұрын
@@jasonolbinski9333 Up Yours Buddy! You made me buy one! Crap!!!!!!
@jasonolbinski9333
2 жыл бұрын
@@tlbfarm4473 you’re welcome
This my first knife and this is a shitty knife.
@ap0lmc
Жыл бұрын
Well it's damn ugly but it throws great.
bllo lo compro ottobr ellowennnnnnnnnnnnnnnnnnn
Is this made in China? Alot of people have had their coldsteel Chinese knives break quite easily.