Here watching this again, after many years, because of the Technology Connections video on coffee makers and his reference to this video!

@GaiaCarney

Жыл бұрын

RedShift - me, too 🤗

"I'm...repairing it". XD

@Liamtronix

5 жыл бұрын

Same excuse used by the Grinch, when he was caught stealing a Christmas tree...

@SoftulMic

4 жыл бұрын

of course he must repair it... he replaced the plastic tube inside to show us how it works :)

@Perktube1

4 жыл бұрын

Only ten bucks. Get her a new one at Walmart.

@kjyhh

3 жыл бұрын

@@Perktube1 That's also under repairing.

@florinpandele5205

3 жыл бұрын

I did that too when I was taking apart my toys. I am an engineer because of that though ☺.

Oh, that why the coffee maker has this bubbling sound. :>

@tz4217

4 жыл бұрын

5years ago

@suicidsasquatch

4 жыл бұрын

2days ago

@OT3S

4 жыл бұрын

8hours ago

@awesomefirefist

4 жыл бұрын

@@OT3S yeet

@PixelBoyMiner

4 жыл бұрын

@@awesomefirefist you aren't deserving of basic human rights

This guy is like the teacher / dad i never had. If only all learning was done like this. Makes it way more interesting.

Again sent from Technology Connections. Can’t wait for your return!

This is surprisingly smart and effective Not only is it cheaper, but it also lets us put in water to use later instead of near-instant action that the first Mr Coffee machines had (probably as well as other early coffee makers trying to usher in a new era of coffee making) It removed the rush of puttinng in the coffee, turning it on, puttting water in and making sure the carafe? is below the outlet within like the 15 seconds itd take for the coffee to soak up and let through Also i came here from technology connections.

@shaider1982

Жыл бұрын

Yup, same here. Hope Bill posts videos again.

@tylern6420

Жыл бұрын

@@shaider1982 look out for march 2023

@someonespadre

10 ай бұрын

The original commercial drip pots used gravity, heat water in reservoir, when light comes on pour cold water into reservoir, cold water sinks to bottom, hot water overflows into brew basket.

Has anyone ever told you that you resemble Mark Hamill? I feel like I'm learning from a Jedi engineer!

@Sir_Pleasant

7 жыл бұрын

looks like mark hamill, but sounds like alec baldwin!

@nyvoodoochild

7 жыл бұрын

Malec Hamwin... I'll let myself out

@TheAgentAssassin

7 жыл бұрын

Malec Hamwin could be an SNL character who shows you how things are made , but the catch is he has no clue how things are made. When he's called out on it he goes into a rage until everyone calms him down agreeing to watch another demo.

@Tuning_Spork

7 жыл бұрын

"Malec Hamwin: 8th Century Engineer Guy". Get Lorne Michaels on the phone.

@gc7439

6 жыл бұрын

Ok, this is a stretch, but when I saw the thumbnail for this video I saw this person: i.gifer.com/RaE8.gif Lol... Not saying engineerguy actually looks like Jan Skylar... More likely I need glasses.

This is my 2nd Keurig coffee maker of this model. kzread.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first worked fine for more than 2 years, and I could still get a decent cup of coffee out of it if I fiddled with it when I decided to replace it. The problem I had with my first unit was this: When attempting to brew a cup of coffee, the unit would either keep brewing until the coffee was undrinkable or it would not run long enough and the coffee produced was way too strong. I cleaned the unit as best I could but it did not help. So in the end it was just too much trouble to get a good cup of coffee out of it, so I decided to replace it with a new one, which has been working great since I unpacked it.

Just a general comment: These are really well done and your voice compliments the narration. From one engineer to another…very good job in your presentations, short, simple, some humor all keeping the attention of which for most on here, is rather short. Kudo's.

@kanjakan

4 жыл бұрын

@Sock Cucka Ikr condescending

Has colored tape, definitely an engineer.

@NoConsequenc3

4 жыл бұрын

us chemists use them as well. Nice for labeling

@sharpfang

3 жыл бұрын

Red, so correct. Blue aka tactical tape, could indicate a military/paramilitary type.

@hxhdfjifzirstc894

3 жыл бұрын

Engineers simply cannot pass up colored tape. Like catnip.

@hanchockelias5123

3 жыл бұрын

I'm an electrician and also an engineer??? That's awesome

@jeremyhillaryboob4248

3 жыл бұрын

Has NES controller pfp, definitely a gamer

Tech Connections brought me back to the memory lane. Miss you, Bill.

The principle is called "thermosiphon". At one time, it was even used in some automobiles, in lieu of a belt-driven water pump., to circulate the engine coolant.

@Derek_Read

5 жыл бұрын

I think this is different. What is actually moving the liquid here is heated water forming bubbles (vapour) inside the rest of the water, and as it rises it pushes the liquid water up. I don't think a thermosiphon uses a gas to move the liquid, it uses thermal convection. A bubble pump (aka gas lift pump) needs the one-way valve to function. As each bubble passes up through the liquid it pushes a little bit of that liquid up, but because it can pass through the liquid it is not capable of pushing it all out of the way, which is why the one-way valve is needed (so the little bit of water that is moved up with each bubble doesn't move back down). That's what gives this kind of pump its distinctive sound, which is created as the gas escapes.

@EGGINFOOLS

5 жыл бұрын

@@Derek_Read This is correct

@fermitupoupon1754

5 жыл бұрын

A gas lift pump only needs a one way valve if there is the possibility that the bubble can go the wrong way. You could replace that valve with a U-bend, provided you have the space to do so. The gas bubble can't go down and around the U-bend.

@JTA1961

3 жыл бұрын

Probably in France... 😃

@webby2275

Жыл бұрын

@@fermitupoupon1754 the check valve is preventing the liquid from flowing the wrong way, not the gas.

We miss you Bill!

@psirvent8

Жыл бұрын

Is he dead ?

@AbyssArcher

Жыл бұрын

@@psirvent8 I sure hope not! I'm assuming he's just taking a break from KZread :)

Unlike most of my teachers, you make me want to learn more, great job!

@aeop

6 жыл бұрын

Micah T fun and interesting no wonder why

@devonnewest7990

5 жыл бұрын

Micah, me too!!

@MohsinExperiments

3 жыл бұрын

Pasting like there to keep 700 the same👍

@TheMursk

Жыл бұрын

Okay students, this week's class will be 2 minutes because i spent all week making those 2 minutes entertaining. Don't @ me if you get problems with the homework, i'll be polishing next week''s whopping 3 minute class.

@lwo7736

Жыл бұрын

You were probably a terrible student

We miss you, Bill.

These videos remind me of an "are you a nerd?" quiz that went around the company a few years ago. One of the questions was "Have you ever bought something for the express purpose of taking it apart to see how it works?" Yes. :-)

@drivestowork

3 жыл бұрын

Some years ago I inherited a pistol... I was shocked at how simple it was when I took it apart! Went back together just as easily.

the 'busted' gaffe at the end was wonderful.

@NotMe35971

4 жыл бұрын

It was a bit too calm. Usually woman without coffee reacts differently.

@pre-packaged_9692

4 жыл бұрын

I feel it was likely based on reality lol

The production quality on this video considering its 9 years old now is insane!

Engineers. Smart enough to show you how ANYTHING works. But not enough to remember TO PLUG THE COFFEE MAKER IN. I joke I joke, you're awesome.

@diggerpete9334

8 жыл бұрын

That just shows how candid this excellent man is and its adds a little comic relief.

@MrCordycep

7 жыл бұрын

You'd be surprised how many times I'd stood stumped at a problem only to find that I didn't plug something in, or I didn't plug it in all the way. :$

@crimsonknight5575

6 жыл бұрын

James Hoffman you make joke.

@tomh2572

5 жыл бұрын

crimson knight yes he make joke

@GabrielTobing

5 жыл бұрын

Yeah that was funny as!

I took apart a coffee maker as a kid and I remember the little ball falling out.

Hahaha "Oh." I'm on a marathon of your videos. Someone showed me the injection molding one and I got instantly hooked.

@cathyshepard253

8 жыл бұрын

+Duane Wente My brother showed me the "How Microwaves work" episode, and now I'm in the same boat you're in. XD

@michaelfixedsys7463

6 жыл бұрын

his Aluminium Beverage can Video showed up in my recommended

@JonatasAdoM

6 жыл бұрын

Like with Tom Scott I had seen one of his videos before but the one that really brought me is the one where he was reading a book talking about how the air conditioner became common on houses. Then the one about how the drip coffee machine became popular got me hooked. It's one of those channels that you'll always know/recognize the host.

@CombineWatermelon

3 жыл бұрын

@@michaelfixedsys7463 me too

The bubble pump does have one moving mechanical part: the check ball. A good example of a heat pump that does not have any moving mechanical parts would be a vacuum diffusion pump. That truly has no moving mechanical parts.

@somerandomuser5155

3 жыл бұрын

But How to.create the vacuum state

Thanks for recommending this to me 10 years later.

Great ending! :D

@LevisLabOfficial

9 жыл бұрын

Barnacules in the wild!

@sharifsircar

8 жыл бұрын

Barnacules Nerdgasm You're here =D

0:43. From a technology connections videos, this design is similar to earlier Mr. Coffee models.

I just stumbled upon your videos not two minutes ago and I'm already enamored. While I will confess that some of your explanations fly right over me, it doesn't discourage me from not being completely entranced and amazed while you explain things we pretty much take for granted every day. Keep it up!

Yeah, we miss you Bill ❗

Woke up this morning and I finally decided to find the answer to this question. It has been at the back of my mind since I was like nine. Thanks for posting this fun short video

Please never stop doing these videos!

2019 anyone? I am amazed at the quality content left to ferment by youtube and brought to recommend after a number of years.

@jacobchai6481

3 жыл бұрын

2021 lol

A few minutes ago I tore apart our old coffee maker, just to replicate the lessons in this video. There's another interesting aspect to coffee makers that I hope Bill can cover someday: bimetal thermostats. The one I found in the old coffee maker was the cylindrical kind, located on one of the power input lines to the heating element. At my job we use a different type of thermal switch as a safety mechanism in case a device overheats, but the bimetal principle is the same. Thanks again for making this video. It was fun to re-watch it, this time with a torn-up coffee machine in hand.

i have learned more from this man in 30 minutes, then 4 years of high school science, thank you!

The one way valve is also called a check valve. As a chemical engineer working on the floor, i deal with them all the time but I had never ever thought they could be used as a pump. Wow.! Also learning recently a bit about "slug flow" usage in crystallization processes, I find equally fascinating. You can actually crystallize solids in a moving gas bubble in a tube and control particle size using slug flow.

Best thing about the coffee machine is the almost hypnotic sound it makes.

I've had some good lecturers like you in the past. The world needs more of you guys. Top tip, if you use an electric kettle for making tea, boil a full kettle, pour it into the empty coffee maker, and the coffee produced will be of a significantly higher quality. I've done it for years. Much better than those sad little heating elements. You'll taste a difference.

@MrLunaV

8 жыл бұрын

+James Laidler You mean pour it directly on the coffee?

@jameslaidler4259

8 жыл бұрын

No, pour the kettle's contents into the resovir. Boiling water is bad for ground coffee. Too hot. Pour the hot contents of the kettle into the resovir to go through the standard path for the hot water.

Your videos inspire, inform & educates people around the world. Thank & many thanks from Thailand.

Another amazing video. I'm more curious about the editing - did the team add a door knock noise because you looked to the right during shooting, or was it planned?

@engineerguyvideo

7 жыл бұрын

That was in the old days: it was added.

@Nezfen

7 жыл бұрын

ha. Smooth :)

@4lligator

7 жыл бұрын

To freak out those people watching these videos while high

@David-pp9jw

7 жыл бұрын

_Haha._

I was going to comment that the title is misleading, but your statement at 1:17 "This simple device creates a pump with ALMOST no moving parts." corrects the record. The presence of the check valve is in fact a moving part. If the check valve ball was to get stuck on the seat, or stick in the open position, it would render the system inoperative.

Just saying hi because no one has commented for about 3 years. I just discovered this guy a few months back. I like his dryness.

Excellent video, as always. You didn't mention percolators that predate coffee makers work on the same principle. :)

"Did you take the coffee maker again?" XD

@JonasRosenven

7 жыл бұрын

"Did you take the coffee maker again?" XD

@TheShizzlemop

4 жыл бұрын

@@JonasRosenven "Did you take the coffee maker again?" XD

@JonasRosenven

4 жыл бұрын

@@TheShizzlemop "Did you take the coffee maker again?" XD

@JonasRosenven

4 жыл бұрын

@Utkarsh Amitabh Srivastava "Did you take the coffee maker again?" XD

This guy got me interested in how a coffeemaker works. I mean seriously. I'm thumbs upping every video from now on before I watch it, just so I don't forget after he blows my mind.

My parents and grandparent told me not to take anything apart again but I wanted to take mine apart and see... now I don't have to. thanks Bill.

*designs a fantastic way to demonstrate the movement of the heated water....................forgets to plug it in* :P

@heart0fthedrag0n

7 жыл бұрын

just engineer stuff :D

@toddkes5890

5 жыл бұрын

I'd rather forget to plug it in, than find out the shocking way it was plugged in accidentally

Thank you - Always wanted to know how they worked.

Bill, I love you. You're the David Attenborough of everyday machines. And you look like Luke Skywalker. So far your channel is my favorite discovery of 2018.

Holly cow ten years ago? Less than 3 minutes?! Absolutely interesting and informative!!?

"I'm repairing it". Haha. It wouldn't hurt to have a thermal fuse in hand when making such a comment. Funny part is, I think that's probably the only thing I've seen go bad in a coffee maker..... except for that one time I dropped mine on the floor.

Such simple and effective design. Very elegant. Though I have not use one of those type coffee machines in over 7 years.

@Sparky400

9 жыл бұрын

so it works like and old pupper boat

@johnfrancisdoe1563

6 жыл бұрын

Philip Anderson The one I've used for years omits the heating of the coffee pot (it's a thermos), but keeps the traditional piping because it also provides a smaller total height.

@EGGINFOOLS

5 жыл бұрын

You look younger so this style coffee pot is probably most like that handle on the inside car door that goes around and around to move the window. Lol. I joke, I joke.

this guy is one of the youtube OGs & is under-appreciated, imo.

it's short,straight forward and more informativ as most other youtube video's-I LOVE IT!

You should do a follow up on the engineering of planned obsolescence (the art of designing shit to break). Because a modern coffee pot is a really good example. In brands such as cuisinart the ball valve is intentionally placed in such as way its near impossible to access without destroying some aspect of the coffee pot, on top of lacking basic screens to prevent clogging over time.

tape, engineer confirmed

Watched this again due to technology connections loved the video about soda cans hope you come back to youtube

I have watched AND shown the aluminum can video maybe 100 times... but I never had seen this one. Came from Technology Connections on 8/11/22.

@engineerguy your coffee maker with an elevated reservoir would work without an additional heating element. You just need to route the water through the heating element and back below the reservoir, as long as the outlet is still below the reservoir the water will flow. I imagine the reasons your proposal of an elevated reservoir is not used have nothing to do with saving money on a pump or a heating element. Instead, a non elevated reservoir lowers the center of gravity of the machine. Also, the non elevated reservoir ensures that the water will not flow unless heated, an elevated reservoir coffee maker would need a valve to control when and how fast the water flows adding cost and complexity. Your video shows how the solution works but inaccurately presents the problem by implying that the water would not flow down through the heating element and back up to below the reservoir.

@sailorsindhbaadh8130

5 жыл бұрын

Is your proposal that the water after mixing with coffee beans/powder, should be sent back to the heating element at the top to keep it warm i.e the heating element performs dual functions, heating the pure water from the reservoir and also the coffee-water mix?

@buddyclem7328

4 жыл бұрын

While ingenious, your idea has one problem. Once the coffee is made, your supply of hot water will be exhausted.

@emilemilian7404

4 жыл бұрын

Your solution (based on the principle of communicating recipients) the speed with which the water runs will depend on gravity. You can vary the volume/time by selecting a differnt section to the tubing, but you can not vary the speed. So you need to have a powerfull enough heating element to heat the water very quickly. While in the solution presented in the video you can use any power for the heating element, liquid circulation will only start when the water is hot enough, only than will the pumping effect occur. So you have the guarantee the water is always hot enough to boil the coffee.

@buddyclem7328

4 жыл бұрын

@@emilemilian7404 Good point! I had not considered that at all.

"Repairing it." Good one.

i love how all of these videos in this channel are like, " i totally was just asking the other day how this thing works! here it is explained!".

I can not praise you enough. Short. Simple. Clear. Great videos!

How come you don't have a tv show on Discovery yet?

@evilpandakillabzonattkoccu4879

7 жыл бұрын

jetttskiman because he doesn't ice road truck or swap log or gold rush or fly wild Alaska or any of the other bizarre jobs people seem to be interested in. learning how the world around you works? ....what's that got to do with 'the discovery channel'? ....it's sad how horrible that channel got and that was years ago. to be frank about it, I don't have a TV anymore.

@Starlite123

6 жыл бұрын

AtomicRetard Wtf is a tv? Can i look up sans? Im only using my tv as a pc monitor. Can i look up "sans" on my tv? And what is a Smart "tv"? Do those have Google? Whats a "Smart tv" without coax??? Can you watch "tv" on that?

@neurofiedyamato8763

6 жыл бұрын

TV is dying because the stuff they put on is 90% bad. There's also lack of chocie of hwat to watch and when to watch. It's utility is also much more limited. The good thing about a TV is that it has better display capability than a monitor. Hook that up to a good computer with good graphics card and processing power, you have a very fine image. But you won't be using it as a traditional TV.

@Colonel1954Dz

5 жыл бұрын

Too educational for TV..

@RaffaelloGiannelli

5 жыл бұрын

Neurofied Yamato l

i really like this channel and he reminds me of Mark Hamill aka Luke Skywalker. I am gonna subscribe

@d.k.1394

5 жыл бұрын

may the force be with you son

I love ALL of your videos. So many of us have always drifted through life, especially us younger ones, seeing all of these things just work, not caring WHY they work, but simply expecting them to when we turn on something as common as a coffee maker. Recently I've especially become extremely interested in not just the fact that a common coffee maker works, but how it works, and the ingenuity and pure genius it took for the person or persons who designed it to get it to work so well. Thanks!

It's real success to tell someone technical principles so simple and clear. Congrats, your videos are amazing.

How to fix anything: Step 1: Make sure it's plugged in.

i always though there sure is two heating coil one for the pad and one for the boiler now i know thanks

@SakariNy

9 жыл бұрын

Better coffee machines do have two heating elements (like mocca master), because one heating element tends to heat too much and spoils the brewed coffee.

it's funny because I was recently pondering how coffee makers worked. I had a feeling it had something to do with the expansion of hot water but didn't know about the mechanism. cool beans

I've always wondered how my coffee maker works. In fact, every time I hear it percolate despite any noise from mechanical bits I knew there was some basic physics principle at work that I was ignorant of. Thanks for clarifying this!

I wonder what Moccamaster does to prevent that horrible slopping noise. Every coffee maker I've yet seen except that one is horribly loud at the end of each run.

@liquidthex

9 жыл бұрын

RealationGames Well, without actually looking it up, the answer may be in this video.... This bubble pump function is designed to allow 1 heating element to do 2 jobs, to be more efficient and presumably cheaper to manufacture.. But if you didn't care about that you could just use 2 heating elements.. That should be much quieter, I would think.

@RealationGames

9 жыл бұрын

liquidthex They still do pump the water in Moccamaster, it's not gravity driven.

i want some coffee now.

what impresses me is how he modifies the machine with work arounds. engineers are fearless when it comes to breaking something down and adding custom add ons and making it still function.

I imagine another benefit of using a tube like this is that you only need to heat the water you use instead of the entire reservoir. Good video!

the valve sort've moves...

@ElNeroDiablo

7 жыл бұрын

Technically: yes it does move. However, when things are described as "little-to-no moving parts" they're referring to not having things like electro-mechanical pumps that push the fluid through instead of letting physics do the work with a simple check valve.

@cakeman58

7 жыл бұрын

ElNeroDiablo except this was literally described and titled as having no moving parts, which is false.

@JoostMehrtens

6 жыл бұрын

cakeman58 Yep so does the on/off button and thinking of it even the coffee pot moves. But that is not what engineers mean with moving parts. Technically 0.9999 is not 1 but for an engineer....

@MinecraftEpicPlayer

6 жыл бұрын

Electrons move in wire which we call electricity - literally, electricity is the energy in the movement of electronics Everything has moving parts or it doesn't do anything

@awhodothey

6 жыл бұрын

MinecraftEpicPlayer An electron isn't a 'part' anymore than an atom is. Sure it's a "part of the process," but that is not what the word 'part' means in this context- or the phrase "no moving parts" would be utterly meaningless. The abstract definition of 'part' shares the same word in English but is actually a completely different concept. A valve is a moving 'part' in your coffee maker; an electron is not. The title is technically a lie.

"almost no moving parts" derp

@rabidkittenapocalypse7398

3 жыл бұрын

Check valves get no love.

@NeutralGenericUser

3 жыл бұрын

yes, that is the definition of “almost”, thanks

@Keys879

3 жыл бұрын

Well technically the ball in the check valve isn't actuated but relies on pressure differences. So.... i would give the description an A-OK.

I honestly think that this is one of the best channels on KZread. Bill, you actually educate people on the technical aspects of everyday life in the simplest of ways and as an engineering student (hopefully one day a legitimate engineer ((: ) I want to thank you for your amazing work. Keep it up!

I just watched about half of your videos and I find I have to force myself to stop and get going on things I have to do. Your videos are wonderful and you have a great sense of humor. I've learned a lot in the past couple of hours. Thanks!

Yeah this is relying on gravity so it will work poorly on Mars. HOW WILL WE MAKE PERFECT COFFEE ON MARS!!!!

@Groaznic

7 жыл бұрын

Jackie Scholl Sure, it will just take 3 times longer to make it.

Actually all the parts were moving on the molecular level

@StefanReich

5 жыл бұрын

Smartass award!

I've watched this video 10 times a day and it still feel just as fresh

How come this VDO has inly 1.2 million views after 12 years?!? This is excellent!

A valve is a moving part...

@arnold84120

8 жыл бұрын

+Alter Kater He said that within the video.

They're nice machines if you don't consider coffee quality. Italian engineers made their machines with taste in mind. This only cares about price and convenience

This is so cool. I never knew how that darn contraption (the coffee machine) worked. Thank you.

Tomorrow morning's cup of coffee ☕ will taste extra good knowing the amazing physics of this marvelous machine, Thank You!

That thumbnail is something we should store in a time capsule

These videos make me happy which is really needed right now.

Awesome videos! Thanks Bill Hammack and Crew

Thank you, Bill. You're the Science teacher I always wanted.

Great teacher. A lot like my dad. He showed me so much when I was a little guy, showed all of us, in fact. Engineer, too. Caltech.

my filter coffee machine works by similarly heating the water so that it re-condenses onto the underside of the slanted roof of the machine and drips down onto the coffee grounds

Yea I never thought about why it makes the bubbling sound, thanks mr. engineer guy!

Love your channel. Feel hope again for our kids

Mr.bill hammak you make very good , informative videos through which even a layman like me can understand complex engineering concept very easily thanks and keep making good videos ..

Hopefully all is well with your young family! I can't believe this video is 10 years old now.

Loved the bit at the end.

I know this is an old video, but it is people like you who made me want to study engineering. Just about to complete my Master's degree. Love your videos, they're always informative and well done. Regards, an (almost) engineer.

That’s Oh in the 1:48 is priceless. 😮😍

Thank you for making these. I'd love to see these on PBS as some sort of short. ~Fellow Engineering & Coffee Lover

You make some great videos, excellent presentation of the material. I have to say, as a student in physics and mathematics, I got a chuckle from the forgetting to plug in the coffee maker. Simply because I have had many projects and experiments where after spending hours setting everything up correctly, I'd have a moment of panic at it not working when I turned it on, then realize I hadn't plugged in any power yet. Keep the great work coming, please. :-)

@MrScorpianwarrior

Жыл бұрын

I assume you are no longer a student, how's your life going?

Always an excellent job on your videos. I enjoy learning from you as a fellow engineer.

Your videos are great! This is a great example of design decisions that engineers have to make.