I know it's Tuesday not Wednesday, someone (Pete) convinced me the sooner I published it the sooner people would stop having a hard time with their cars :)

Brilliant video, Dave. It's nice to hear someone speak up and [gently] explain that the "common wisdom" doesn't necessarily apply in all cases. A lot of folks base their tuning on what someone else does, even though their track may be totally different - or buy replacement parts before they even try a new car out to see what it needs. Excellent job here!

Thank you for doing this Dave it is much appreciated.

Very very good video Dave! Thank you so Much!

Great explanation.. I will be following this up with a tuning video. These cars love float.

Excellent explanation there!!!! PLUS watch out that the cables don't press the body up via the inlet, the minimum rattle in the rear is very important

Well said Dave, every brand is different and tuning technics differ wildly. hopefully this will help out those having issues. nice conversation.

Great video Dave. It will help people to enjoy the cars like we do ❤

Wow, just wow. Were you inhabiting my basement this past weekend? I spent a good deal of time tuning my Datsun 510 (motor break in, gear mesh, body float) and couldn't crack the code on tire rub. This is excellent. Great video on how we have to unlearn some things and think differently. I also ordered some Paul Gage urethanes for all my Grp 2s. Wanna give them a go.

Thanks Dave, had a frustrating first race with the 510 over the weekend, now I know why. Thank you 🙏

The chassis and body working in harmony together. Good stuff.

Good video, I love my C5 Revoslot as it came but I might have a look at some of those tuning parts. Thanks for the heads up.

Thanks for the info Dave and yes it was a very good chat.

Oh this is slot car video gold. Well said.

@slotr

4 ай бұрын

Thanks Harry, praise indeed from you sir!

Excellent information!

Excellent explanation of the RevoSlot system! Thanks 🏁

Great video Dave, I love the explaination

Great explanation. Thanks for doing this. I still wish there was a third party company that was replicating Carrera cars and using their design structure. A true plug and play experience out of the box just like official Carrera cars.

Nicely done Dave.

Nice info I don't have one but now I now know how they work if I ever do decide to get a Revoslot, The system they use looks really nice too!

@slotr

4 ай бұрын

they are amazing cars

Great video Dave! Completely agree, doing it wrong 😂

@slotr

4 ай бұрын

I'm from Essex, no flowery words, just say it how it is 😁

@DNASlotCars

4 ай бұрын

No point in flowers, Dave 😂

@kirbs50

4 ай бұрын

@@slotrGreetings from Burnham on Crouch. In Essex, but only just.

Outstanding Dave - the best thing on the internet today 👍🏻 Although there is another pressing controversy brewing. Unplugged power sockets left turned on?! I think my old dad would lose his mind 😅

As I haven't had a chance to put my Datsun on the track yet, I'm very glad you've made this video Dave! Thank you!

Great vid Dave

So true, not to mention that there is a fine line between the tires rubbing and not rubbing, once you get it, the car runs great 😊

Thanks!

@slotr

4 ай бұрын

thank you indeed

Hi Dave ....i have my Escort running great since i set it up last week ..the motor needed a little adjusting but now she runs sweet ....same as my BRMs need a little fettling but i have them all running sweet , my TTS fiat is a different story so I haven't did much to it yet but its a weird car and wouldn't be my favorite. The only problem i have with my Revoslots and BRMs is the soft heads on the motor mount screws ( even with gentle hand torque)and i also think this is a problem with folk not knowing exactly what size to use wither it's torx or allen head ...another thing lacking in communication from Revoslot/BRMs...great post and im sure it helped many frustrated folk 👍

@slotr

4 ай бұрын

the bolt heads are made of cream cheese though you have a point

Very useful video Dave I'm sure many will find it helpful, I did and have shared this great bit of information 👍

@slotr

4 ай бұрын

Awesome, thank you!

Great explanation Dave. I totally agree to that what you`ve said. But, moreover there is one point i do not understand with that Revoslot system. The chassis hight set up is quite high. Why do they do that? The center of gravity of the car could be much better with less ground clearance and thus the tipping point. There is no way to set this, or am i wrong? Different axle holders in combination with other body holders would be the solution. People often adjust that with self made shims under the axle holders and body holders. All the best, Carsten

Very good video.To me if a person is having "problems" with a new slot car,and moan about the car or the manufacturer to the wider community,then they are missing the ethos of our hobby.Ootb,check,test,tune,repeat.I disagree that its the manufacturers fault,unfortunately in this modern world the"someone else is to blame for my problems"syndrome is all too prevalent.

@slotr

4 ай бұрын

The trouble here is, people who only usually buy toy cars with magnets and plastic wheels that you can't adjust have seen this car and wanted it without anyone at all telling them that not all slot cars are the same as the one brand they've previously stuck to. It is not unreasonable to expect there to be some published literature from the manufacturer at least somewhere that could be referred to. Slot car companies on the whole are terrible at communication, revoslot especially so, they don't even update their own website all that often .. the lime green Kadett, the Quadri 911, pretty much none of the cars they've released in the last 6 months have even been added to their website, they only post on their Facebook page about once every three months... not really a brand in touch with it's customers is it?

@lotus2430

4 ай бұрын

@@slotr Fair point you make,but i stick to my opinion afore mentioned,thanks for your reply mate.

@slotr

4 ай бұрын

@@lotus2430 thing is the likes of you and I tinker with stuff probably almost habitually, but we are very much in the minority, and if you want the hobby to grow then some people need almost cookbook instructions to be able to progress in the hobby.

@lotus2430

4 ай бұрын

@@slotr Yes,im constantly messing with cars,looking for that sweet spot,of course.Haha,a slot car "cookbook" great idea.you should write it.

@slotr

4 ай бұрын

@@lotus2430 a retirement project I think lol

I literally just did didna vid last night discussing this. So I didn't jut copy you in "yank" mode :)

@slotr

4 ай бұрын

the more of us can get the message across the better :)

Totally agree with you. I think some people need to stick to scalextric and carrera. And leave the hobbyist cars be. I enjoy working on cars. Real or slot.

@slotr

4 ай бұрын

Yeah I have a few full sized money pits too! I don't think people should stick to the home set brands but they should certainly be more aware of the leap they're making from "set up for you" to "set up mostly but tweak it" with Revoslot and "here's the bits assembled, you set it up how you like" for brands like Policar and NSR, then things are a lot less painful for the consumer. It's in the manufacturer's interests to do this but they don't and it's baffling.

Dave my Problem is that the 2 RevoSlot’s that I have both did not run out the box at all Because all the Srews were loose on the motor on both cars

@slotr

4 ай бұрын

3 loose screws two of which you should adjust as routine maintenance anyway,, or buy a slot it or NSR and have to totally rebuild it... I know what I prefer

@1430gt

4 ай бұрын

Neither did my Opel kadette. But they are hobbyist cars. You need to work at them.

@darrenhall6400

4 ай бұрын

@@1430gt I’m sorry I spend over £80 on a car the least it can do is run Round the track out of the box

@1430gt

4 ай бұрын

@@darrenhall6400 ok .

*promosm* 💋

Between you & John Albright, they don't need to explain anything. You're there unpaid spokesman. John helped me with my first Revo the C5 corvette.

Thanks!

@slotr

4 ай бұрын

Thank you 😊😊🙏