No video
Cody's Fully Built Mazdaspeed 3 l 30+ Psi of Boost l 600+ Horsepower
Hey guys hope you like today's video! This one is a banger! This speed 3 is cody's red mazdaspeed 3 and its insane! This is by far the fastest car ive ever been in! Please be sure to like and subscribe!
instagram
steven_devey3
facebook
steven devey
Пікірлер: 311
"Take your time, build it right, build it once" that quote is something anybody who wants to modify their car should adhere to.
@davidl.5335
2 жыл бұрын
That was deep bro. On a serious note, this is actually really good advice 👍🏻👍🏻
Speeds are underrated.
@StevenDevey
6 жыл бұрын
Wes Hatch I agree 100000%!!
@greentoolsnyc3985
6 жыл бұрын
Word
@hondamanvtec2894
6 жыл бұрын
Wes Hatch why ? Is it cheap to get 600 hp?
@Brancovtn65
6 жыл бұрын
Yep. Everyone looks down on them until they line up.
@chiphenley1229
6 жыл бұрын
Disagree. I can go by my experience to say that I have a buddy w an 07 Speed6. Less than 100k miles jumped time. Cobb access port,egr delete,wouldn't come close to my SRT4. Black Speed3 at local strip,1/8th mile runs 8.90. Decent. But I'm only going on these 2 that I've seen. This red one looks like a bad bitch tho!
Wow this thing pulls! I love how Ms3's with this power are becoming more common. The platform has really come a long way in just 10 years :)
@StevenDevey
6 жыл бұрын
Wannabe Tuners the platform really has come a long way! This car is so sick right?
@WannabeTuners
6 жыл бұрын
Steven Devey Amazing!
@heavenlyhatch6219
6 жыл бұрын
Ya now we just need more mk5 gti to be 600 hp :/
@X11CHASE
6 жыл бұрын
Project Build mk5 Isn’t mk5 the ugliest gti ever..? With the round bulbous lights and the unpainted trim on the rear bumper? Wtf were they thinking
@WannabeTuners
6 жыл бұрын
Joey Arthur Zooberry Tbh I think all the generations of GTI look great. They all have a modest look, but in their own unique way :)
Love this shit man. Keep our MS3 community alive and strong!
@StevenDevey
6 жыл бұрын
Brandon Renner thanks man I will for sure!!
Thanks for stopping by Steven! I’m disappointed that I couldn’t be there. We would love it if you came by again once I’m back in town so I can take you for a drive in the gen2 shop car (closer to 800whp) and/or possibly the GTR if it is finished by that time. Look forward to more videos & content. The Evolutionary Performance team is always happy to help & supply awesome content for viewers.
@StevenDevey
6 жыл бұрын
Artem Arutyunov I absolutely will be back! I’m excited for the opportunity, I can only imagine what 800 feels like! It’ll make for some good content that’s for sure!
I have a Mazda 6 speed 2006, stock of course, would like to build it one day, keep those Mazda 3 and 6 coming, good content, lol. 👍👍👍
@StevenDevey
6 жыл бұрын
Jose Rotary thanks so much brotha! And I love my speeds, stock or not they are sick cars!
This is one of the best videos yet! Love that Mazda speed bro. Thanks for sharing!!!!
Such an underrated car, even when stock. These are fast becoming classics. Great video.
@StevenDevey
5 жыл бұрын
Speeds are so underrated! I hope they become classics. Thank you brotha!
@wyattlile3151
5 жыл бұрын
Cars are rare to find to! I didnt know about speed3s untill i found mine and im extremely happy with the car, with a couple bolt ons it eats subies allday
@interceptingfist5682
5 жыл бұрын
Classics? I don't know about all of that. . . Sadly, American's only cares about what people are doing in (is it jdm yo!) Japan. If these were to blow up over there. . . Then all of a sudden more people would want these.
Should've mentioned how important HPFP is!! On a real note. The car is built well. The jmf IMs are so nice. Stock IM have about a 20% flow imbalance between cylindere which is outrageous. Been considering getting a focus st IM for the cheap and using the damond adapter. Speeds are definitely underrated. I have a gen poo. 💩 S3 fbo e33 mix hypnotic tuned.
First gen Mazdaspeed3 is my dream car. I love your build.
@mattykinzisland6571
4 жыл бұрын
then go buy one wtf you waiting on
my turn baby... wait and see the blacked out RED!
Im just surprised that he still has his EGR lmao.
@StevenDevey
6 жыл бұрын
Justin Adams if it works it works right? Lol
@lhaaker
6 жыл бұрын
Easier to pass emissions with it. You can just plug it in before you get it done and unplug it after. It essentially makes it no longer function. I know him and this is why he does it.
@mazdaspeedg2380
6 жыл бұрын
JustOneMorePSI this is my mistake I did the egr delete got to put it all back together for inspection but when I do ima just unplug it
Awesome thanks looking forward to the upcoming video This set up is bad ass
@StevenDevey
6 жыл бұрын
speedlife madzela this set up is so sick! There will be lots more vids to come!!
I have the mazda 323 version, (think youse call it the mazdaspeed protege) it keeps throwing gearboxes, what do you reccomend i do? Rebuild it or replace it with something else and if so, what?
@StevenDevey
6 жыл бұрын
Brodie Lounder I’m not to sure man, I like the 323 version but if it keeps blowing up the gearbox than it might be time to move on!
@mazdamatt7703
6 жыл бұрын
These are bad for the LSD. Used ones can be found for as little as $400. Quaife makes an excellent LSD replacement.
@MegaFLOWZ
6 жыл бұрын
Replace it with ford tx3 gearbox, you can mix your ratio on your own..
Great video bro. want to see more about evolution motorsports. shop looks sick.
@StevenDevey
6 жыл бұрын
Speed Inspired it’s such a sick shop I’ll definitely film more of it!
I love it! Where's the shop. I always wanted to build a motor. Just rockin my tiny BNRS3 on E33 but I still love it.
That speed 3 is so sick!
What breather cap is that on your oil or did you fab that because I want it!
@StevenDevey
4 жыл бұрын
Great White North I think it’s speed performance
Yes! A fellow Mazda 3 car guy!!!
Got to say im not a fan of the flutter sound when the turbos spooling but thats just my opinion i love the car otherwise sick build hoping to get my own mps in the coming weeks
That’s so sick keep up the good work!!
@StevenDevey
6 жыл бұрын
Ryan Francis thanks brotha!
FD Wheels are such an OG trick.
Dang. My brothers is nowhere near 600 but it's fuckin quick AF after it gets traction.
@StevenDevey
6 жыл бұрын
TJames2.0 dude even the stock speed 3’s are quick but 600 felt insane!
Only two things would make it better: being a Genpu, and recirc'ing the dump back into the exhaust ;-P Half-joking aside, nice Speed3
@StevenDevey
6 жыл бұрын
Numinous thanks brotha! But don’t worry we will have some crazy Genpu vids coming too!
Awesome car! EP does good work!
@StevenDevey
6 жыл бұрын
Kyle Dewey EP is such a great shop! 👍
How do you like your SB clutch? I have a Stage 3 Endurance with about 1,500 miles, and it still isn't fully broken-in and grabbing. Professionally installed, and many miles were highway. SB is convinced I still just need more shifting/city miles to bed in the Kevlar - apparently 1,000-1,500 city miles is typical for these.
Ok that’s insane. The noises
@StevenDevey
6 жыл бұрын
Caden Mittelstaedt it’s so insane right??
What’s the front wheel set up. I know it’s rx7 fd wheels but what size are the tires and what size spacer is on. Were extended studs used or was it a studded spacer
Great work with ms3!!! Respect to owner 👻
I have a 500whp MS3 and I have an EWG on mine but it is nowhere near as loud as the one in this video. If anyone has any idea lmk lol
What’s the best way to make 5-600hp on Mazda cx7.
@StevenDevey
6 ай бұрын
Idk if you can really on a cx7 I would buy a speed 3 because it could be expensive
Beautiful, brand of your central speedometers?
Sweet😎I love his mindset in building these cars. Where are you guys located ?
Nice! Is it still the 2.3 or did u do a 2.5 swap? I just bought a 13 sp3 2 months ago , can't wait to start doing some upgrades.
Bro we should meet up some time I got a 93 Mazda mx3 turbo that I think you guys would like
@StevenDevey
6 жыл бұрын
dsmtsi92 that’s so sick! I’d love to check it out!
I'd love to put some more power in my 08 Speed3... Not 600+ HP, but y'know, something reasonable. Cool video.
@StevenDevey
6 жыл бұрын
SevansVII I feel ya man a little extra power would be awesome! No worries brotha
Hands best shop in salt lake city 😎💪 I live in cali but I plan on bringing my speed back there for cody and artem to work on it some more.
I work with Cody!!!! Love that guy and his speed , sad he’s getting rid of it soon tho :(
@levilloyd817
6 жыл бұрын
What shop and where is this?
@ivansalinas3644
5 жыл бұрын
Why is he getting rid of it
@inkisthename
5 жыл бұрын
he wants a corvett
What brand and model of injectors?
@StevenDevey
3 жыл бұрын
Kirill Kuznetsov stock
Only question I have what’s your ltft stft looking like my stft is around -/+6 give or take on idle but my ltft usually stays around -/+ 12.5 and other times it stays around -/+ 8.6 I don’t think I have any leaks my afr is at a constant 14.7 I’ll recheck all my couplers and bolts any advise
that owner of the red Mazda knows his fucking shit
I’m looking to go this route with my 2nd gen in the future and I’m wondering with what you did to the tranny to build it to hold the power
@StevenDevey
2 жыл бұрын
Stock tranny holds alll the power. Just need a clutch
Very nice brother
@StevenDevey
3 жыл бұрын
Thank you my good sir!
I have a 2007 Mazdaspeed 3 and my VVT went out my timing jumped a tooth I’m working on it but any advice
@StevenDevey
2 жыл бұрын
I have advice, take your time and make sure everything is really clean. Those fricken washers work well but only if it’s perfectly clean. Also if you jumped a tooth be sure you didn’t damage your pistons or blow the engine up already. No need to change timing if something is damaged. Use parts from Mazda. The genuine parts. If you went to autozone to get them they won’t work and could cause problems.
@StevenDevey
2 жыл бұрын
I have more advice but I’m not sure what you know already. These comments go right to my phone so just comment any questions you have and I’ll respond instantly
I was just curious about the aux fuel set up because I'm going to be running aux fuel on my ms6 and I just found out that damondmotorsport came out with a new aux fuel rail set up that uses the stock Intake manifold
@StevenDevey
6 жыл бұрын
speedlife madzela ya man I’m not to knowledgeable about aux fueling! This guys at EP know there stuff! We will have more videos coming out and I’m sure they can explain! Stay tuned!
Great content man!!
@StevenDevey
6 жыл бұрын
ZACH TAYLOR thanks so much brotha!
Very Cool. Thanks for sharing.
@StevenDevey
6 жыл бұрын
chris mcbride thanks brotha there will be lots more to come!
correct me if wrong but doesnt the mazdaspeed mp3 have a top mounted intercooler?
@StevenDevey
6 жыл бұрын
Ricardo A the stock mazdaspeed 3 does but this mazdaspeed 3 is not stock at all lol
@joeycox7724
6 жыл бұрын
stock they do but they are susceptible to heat soak. so if you want crazy 400+hp i suggest front mount
@ivansalinas3644
5 жыл бұрын
Yes
@ricardoa1661
5 жыл бұрын
thx for the replies :)
Is codys accessport have the vent holder or is it set up next to the vent I want to get the same dash guage set up for my 08speed3?
I'm curious on what my buddy from work will need to keep up with my 800hp vic in his 2006 mazda 6 2.3l he's got his turbo kit.
Bonjour, je peux trouver ou le capot avec l'aeration ? Car je ne le veux pas en carbone... aurais-tu un site a me donner stp?
omg I can't wait to start my project race car s3/6 either or I only need 1 more stack n I'm off to the lot
That almost look like the speed that’s parked by my house in Ogden!
@StevenDevey
2 жыл бұрын
He sold the car so it could be
@Heartseasestudios
2 жыл бұрын
@@StevenDevey I’ll take a picture of it and send it if I can!!
@StevenDevey
2 жыл бұрын
@@Heartseasestudios sounds good to me! Or just let me know if it has a hood on it. I think he left the hood on
Do you know what kind of grill that is?
That wastegate is loud af! Is there a screamer pipe facing down I can't see?
@StevenDevey
4 жыл бұрын
MyBallsUrJaws no screamer pipe. Just open wastegate
Is this the 1gen speed 3 engine or the 2nd gen speed 3 engine (the one with the big smile in the front)
@StevenDevey
6 жыл бұрын
Cody’s speed 3 is a gen 1 with the original motor so a gen 1. But the engines are almost exactly the same!
Thanks for helping out bro
Where did you get that hood with the scoop!? Been trying to get one for my gen1
@StevenDevey
4 жыл бұрын
Kyle Medeiros it’s discontinued
That ewg sounds so good!
@StevenDevey
6 жыл бұрын
deathchurro it’s incredible right?
@Hades3697
6 жыл бұрын
Steven Devey for sure! I miss my speed3 if only a deer didn’t run out in front of me
I have a speed 3 and a speed 6 I love Mazda’s. Won’t get anything other than that. But where is this shop at? I’m out of Maryland and want some work done to my 6
very late like. but great video and advice. !!
@StevenDevey
Жыл бұрын
Thank you brotha
Nice build mate cool dudes
Is the car able to put all the power down and if not when can it in terms of speed
@StevenDevey
6 жыл бұрын
The car puts the power down pretty well, it depends on conditions of course but it definitely spins in 1st and 2nd but usually 3rd gear and up it hooks!
@gabrianloarca6050
6 жыл бұрын
Steven Devey Nice i have an ST currently making about 350 ive been debating if i wanna go more than 420ish whp cause im beginning to slip in 1st with 20psi but with radials might reconsider
Got a Mazdaspeed 08! Misfiring and I think the engine done! About to trade it off, found someone to rebuild the engine but it's gonna cost a lot.. u see am a family man lol..
@StevenDevey
6 жыл бұрын
obiyonx ya man that’s tough, you maybe could build it yourself or find a cheaper shop
whats the quarter mile?? 60ft?? and where yall located??
Hey what's up I'm ivan I'm from twin falls Idaho I have a 2008 1st gen mazdaspeed 3 I love it I had it for 8 plus years only has 105k miles not bad it's all stock it only has a injen cold air intake and a hks BPV I been wanting to do stuff to it I just don't know what to put on it it seems like you guys do any tips. Pls get hold of me thank you
Thanks
What steering wheel is that??????
@StevenDevey
6 жыл бұрын
Doggy Time it’s a corksport steering wheel
Stock mazda 3 not speed what are the internals good for. Looking to have fun 350-400 More of a road race car. Any help is greatly appreciated
@StevenDevey
Жыл бұрын
I mean the internals are probably decent but the age old answer to your question is, you can’t really build a Mazda 3 because you don’t have an ecu that’s able to manage the engine so if you slap on a turbo it’ll blow up possibly. And the money spent on the Mazda 3 might end up being more than just a mazdaspeed 3 if you take into the account all the parts you’ll have to get, ie turbo, ecu, ect.
@mariojablonski7861
Жыл бұрын
@@StevenDevey piggy back. No worries. I have been doing this for many years.
@StevenDevey
Жыл бұрын
@@mariojablonski7861 ok if you know how to do it you’ll be alright but I would say internals are good for 300 or so
@mariojablonski7861
Жыл бұрын
@@StevenDevey thanks buddy. I have built full race motors in imports for about 20 years. Figured I would reach out to see the stock setup was good for.
Love the vid my brother has one dope ass car!! Can’t wait for us to build mine!! If anyone wants to make some power but don’t know how to do it! Ship your motor to my boys at evolutionary performance for all your haul ass needs!!! “Build it right the first time!”
@StevenDevey
6 жыл бұрын
Tyson Hammer hell ya man that’s right, EP is the best shop ever!
Hay is that a gen2 hood? I love the scoop in the hood
@StevenDevey
5 жыл бұрын
Jonathan Caraballo it’s not a gen 2 hood, it’s an aftermarket hood that isn’t made anymore
How well does it put the power down? Does it spin into high gears?
@StevenDevey
4 жыл бұрын
alex gerling oh it spins in every gear. Fwd cars with this power need drag radials and a warm day. But it’s super fun haha
@alexgerling3686
4 жыл бұрын
@@StevenDevey nothing wrong with that it's all about smiles per gallon
How is it possible to get 600 hp on a small 2.5 litre engine?
@StevenDevey
6 жыл бұрын
Tim Dumoulin you need lots and lots of boost!
@timdumoulin8004
6 жыл бұрын
no shit lol
@carlcomputer9686
6 жыл бұрын
A prayer and arp head studs
@ibetatestedyourmother
5 жыл бұрын
2.3
@ryanrusk7249
5 жыл бұрын
There are 800+ hp speeds
Very nice mazda
@StevenDevey
6 жыл бұрын
BLUE ON BLUE RACING it’s so sick isn’t it?
How much money was put into it?
I see this car in Utah. Very sweet ride.👍👍
Shaggy traded in his mystery van for ms3...nice
goals
Sweet ride, what color paint number is that?
How much to get 600 on one of these ? Looks like a nice project
@StevenDevey
6 жыл бұрын
yes sir to make 600 whp it takes about 10k but can be cheaper if you can do the work yourself!
Can we have a list of complete mods because i couldnt hear
@StevenDevey
6 жыл бұрын
Dru Goodman yes Ill make a complete list stay tuned for a mod list video!
you should give a parts list that are on the mazdaspeed 3
@StevenDevey
4 жыл бұрын
Maldiキャメロン I won’t be able to give one for this exact car. But I can tell you anything you want to know.
When are u guys making speed content again
@StevenDevey
Жыл бұрын
Not sure brotha, hopefully soon
@mzr3553
Жыл бұрын
@@StevenDevey thank you.we miss u guys😊
Hey bro where did you get the hood i need one with the scoop
Great vid!
@StevenDevey
6 жыл бұрын
Jack Liston thanks brotha!
what hood does he have??
That car is very fast ❤️ me encanta !!.
where is this shop
Battery?
stock transmission?
Whats his shop called
What kind of front lip?
What is the wheel/tire setup?!?!
What brand are the 1000cc inyectors for that speed 3
@StevenDevey
6 жыл бұрын
Joshuel Ortiz I’m not sure to be honest but stay tuned for a complete mod list video!
@lhaaker
6 жыл бұрын
I think they are injector dynamics
How do you get it to sound like that sick
what hood is that
Definitely need my protege built
Good vid!
@StevenDevey
6 жыл бұрын
Z3R0188 thanks so much!!
i have a 2006 mazda 3 with the non turbo 2.3 engine...is anything you did to this engine possible on mine? just curious
@4Stulls
5 жыл бұрын
Russell Bluewolf I had one also and I had a good amount of stuff done to it, you can do headers ,exhaust, intake, intake manifold, coil overs
@StevenDevey
5 жыл бұрын
Yes there are always modifications you can do!
Like the Mazdaspeed 3 ride, have you done upgrades on a Mazda 3i sport?