Thank you man it gave me a lot of insight on my 98 Chevy blazer misfires on multiple cylinders it was about to drive me bonkers on trying to figure it out

@JOEZEP54

6 ай бұрын

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @marcusc110 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Thank you for the good video.

@JOEZEP54

6 ай бұрын

Our pleasure! I am glad this was of help. And thank you for watching and taking the time to comment. @FlyingControlLineStunt I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Thanks for the vid. I just got this code and the autoparts guy said I needed a new coil pack. Ill check the plugs and wires first now.

@JOEZEP54

4 жыл бұрын

You're welcome. I hope you have an easy fix. The codes you get at the auto parts store give a shotgun approach. They can point you in ""about"" the right direction & sometimes hit it right on. Let me know how you make out with your repair. The best feedback I get is when one of my videos helps someone out. Stay well , Joe Z

Steering column doesn’t need removed. If you slide the red boot away, you’ll find a flat spot on the column. Turn the wheel until that flat spot points toward the ground giving you a tad more clearance. Combine that with the slight extra room saved by using a skinny extension up against it, and you’ve got just the right amount of room to use a socket on #3.

@JOEZEP54

5 жыл бұрын

Thank You, for the information. You are right on with what you have commented. But on this column there wasn't any flat spot and believe me I checked for it. I appreciate your comment. Please continue to comment on my other videos as well. Comments such as yours add to the usefulness that someone searching for info. Stay well, Joe Z

@terrywarner8657

5 жыл бұрын

My steering wheel isn't centred, so this is good tip to know. And it will make me look more closely at the front end to see why it wasn't put back right - a hasty collision repair maybe.

man thank you too much . now I know why my car takes a lot of fuel

@JOEZEP54

7 жыл бұрын

Thank you for viewing & commenting. I glad this video helped you out. Be sure to subscribe and pass this video along. Stay well, Joe.

Awesome......Thanks.......

@JOEZEP54

3 жыл бұрын

Most welcome! I am glad this was of help. Thank you for taking the time to comment. Comments, questions & of course 👍 are always appreciated. Stay safe, Joe Z

You don’t have to disconnect it, what I did is lift the engine

@JOEZEP54

3 жыл бұрын

Thank you for watching and taking the time to add another solution. Roberto Torres Morales I have other videos on my channel that cover many different subjects and new videos added weekly that may also be of help or interest. Be sure to 👍, share and subscribe if your are inclined to do so. Also not to miss any new videos remember to hit that notification 🔔 Another way you can help support this channel at NO cost to you is by using one of my affiliate links. *** Thank you for watching I really appreciate your support.*** Again I hope you get to enjoy other videos on my channel as well. Stay safe, Joe Z

good job

@JOEZEP54

4 жыл бұрын

Thank you. I appreciate your comment. Stay Safe, Joe Z

I have the same problem with my 2001 Chevy s10 v6 the service engine soon light comes on the code read p0300 random multiple cylinders misfire can y’all help me out I didn’t change out the spark plugs

@JOEZEP54

4 жыл бұрын

Ruben Vasquez, Thank You for watching. I am not auto tec but just a DIY guy that is willing to give just about anything a try. That said the first thing I would do is to see if your spark plug wires are shorting out. The way I did it was to wait to evening then get a spray bottle with water & spray the wires looking for sparks. I am not recommending this procedure. Be "very careful" if you do this. I just copied this on line for you: Basically this P0300 code means that the the car's computer has detected that not all of the engine's cylinders are firing properly. A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. If you are going to change the plugs & have trouble with the # 3 cylinder I pasted a link to my video where I had this issue: kzread.info/dash/bejne/ZolksqWlntOsg5M.html Ruben Vasquez I have other videos on my channel that cover many different subjects and new videos added weekly that may also be of help or interest. Be sure to 👍, share & subscribe if your are inclined to do so. Also not to miss any new videos remember to hit that notification 🔔 Stay safe, Joe Z. Ruben Vasquez I just want to mention If you haven't installed the TubeBuddy browser plugin yet, to help your channel grow Just go to my favorite tool for channel growth Tube Buddy. Now You can use it too, here's my affiliate link to the Free version www.tubebuddy.com/joezep54 Start with the free version, yes it is free to not only to down load but to use.I hope you enjoy other videos on my channel as well. . Stay safe, Joe Z

This is when my whole problem started with the wires now i have a random mis fire i gap plugs to .060 on start up runs perfert drive to walmart all good come out walmart jump on 85 all hell opend up the worste shake every so i done the distributor well needed runs better but still a mis fire bout a coil pack made no difference im lost now plz help this is my only ride to and from work anybody got anything

@JOEZEP54

4 жыл бұрын

Recheck all the wires. Remove them 1 at a time both at the plug & dist ends. Make sure they are snapped all the way in. If it still misfires check the dist cap. even though it is new. Look for cracks, black arching. You may want to try another new dist cap. The less expensive ones sometimes come defective. Not sure but if this does not work it may be the distributor itself. I would check further before changing the dist. Hope this was of some help. Joe Z

Let's see the plug you clown. Fell asleep after 5 minutes

@JOEZEP54

4 жыл бұрын

Gtorjoe Sorry your attention span is only 5 minutes, can't help you with that. If you do not know where the spark plug is located I suggest you get someone to help you out. But thank you for stopping by & just a suggestion if you cannot think of anything good to say or do have constructive criticism leave out the name calling if you want to be taken seriously. Stay well, Joe Z