Cobb Accessport Dialed Mounts Defroster Vent Dock
Автокөліктер мен көлік құралдары
On this week's Two Minute Tuesday, Kevin shows you how to install one of the popular docks for the Cobb Accessport!
------
www.subispeed.com/products/30...
------
Looking for the most performance out of your car? Pick up a Cobb Accessport and feel the gains right away:
WRX: www.subispeed.com/products/co...
STI: www.subispeed.com/products/co...
Forester: www.subispeed.com/products/co...
Want to change the exhaust note of your car? We have plenty to choose from:
www.subispeed.com/icp/engine/...
Or maybe you're looking for a new set of wheels to set you apart: www.subispeed.com/icp/wheels-...
------
Instagram - / subispeed
Facebook - / subispeed
Пікірлер: 68
Had it for about 8 months now. The mount started to warp a bit because of the sun. The magnet fell off about a week after I installed it also. Had to get some sand paper and scuff the surface and re-glue the magnet. And lastly, the top corner of your AP will rub against the windshield every time you put it in or take it out the mount which could cause a little wear on the AP corner. It’s the sleekest mount I’ve owned but there needs to be a revised version to address the problems. Then it will be the best mount for me.
Can’t wait to pick one of these up when I get a wed in a few years
Man I was iffy when i heard all of those bad rumor reviews! But I can honestly tell you I have made quite a bit of purchases through you and never experienced any of the complaints that everyone makes. And I will continue to buy more parts from you!
I miss this guy. Great vid
I purchased and installed this over the last weekend and I love it. The best mounting solution for an AP thus far. My only complaint is that it does need a light sanding to take away that 3d printed look. But install was quick and easy. Just keep in mind that its 3d printed and you can't wrench the crap out of it. Also, I've had zero issues with Subispeed as a company and the parts I've purchased through them. Their tail lights are phenomenal.
@SubiSpeed
4 жыл бұрын
🙏🙏🙏
Hi just wanna buy one , but my driver side on the right hand side, so have any product like this fit for my car , thanks a lot.
@SubiSpeed, are you still planning on doing a demo video of the Buddyclub tail lights?
Might just get this one 😎
This beats 3m taping the dock that comes with the AP because this one holds the connector in place. Easier to plug and unplug especially if you don't want to leave your AP plugged in.
Does the accessport not need to charge? Because the charging cord isn't long enough to reach that mount..
So I just got the "back in stock" Dialed mount but a V3 showed up with no instructions at all and there is a 2nd piece I have no idea what to do with. Any pointers?
It’s a lot tougher than this video makes it seem, and I had to razor blade a bit to make everything fit, but it looks awesome. The absolute best solution to cover wires and an awesome idea. Blows every other mount out of the water
Do you guys make one for the 2004 SG5 forester xt?
I had one. Switched to the A-pillar mount. The vent mount is 3-D printed and after a few months, it broke along the print “seams.” It looks great, but not really functional over time………..the A-pillar mount is sturdy and the AP is easier to read in that position.
Something like this but with a phone ?
Can having the heat on damage the accessport ?
@DankyDre420
2 жыл бұрын
Did you figure out if it does?
I have a question if you have the Cobb you can buy the pedal comander too or is unnecessary thanks
@SubiSpeed
3 жыл бұрын
Unnecessary.
Hahaha i forgot to remove my film and was like damn cobb couldnt put a better glass screen haha
Interesting. So cool, but it won't heat up the Accessport?
@SubiSpeed
4 жыл бұрын
nope, the vent still directs the air as normal towards the window.
@TrVlogs82
4 жыл бұрын
@@DETCOR @SubiSpeed thank you.
Does this fit the 2017 Forester XT?
@SubiSpeed
4 жыл бұрын
It does not.
Heads up, make sure your cobb is fine after using the mount, at least once or twice a month. Buddy's stopped working due to the ac and heater.
@misael1396
4 жыл бұрын
Did he get a refund? I really like this mount placement cause it's clean.
@jkljkl218
4 жыл бұрын
@@misael1396 refund for the mount? Nope.
@mrhavoc2415
4 жыл бұрын
Really? I've left mine in my car mounted in the Arizona summer with no issues 115+ degrees
@jkljkl218
4 жыл бұрын
@@mrhavoc2415 i think it was the constant turning on and off with the ac blowing into the port, condensation maybe?
@pumpkinspicelatte1731
Жыл бұрын
That's my concern I just bought this mount and in the summer I blast the shit outta my ac where I get condensation build up coz I just left it on constantly and gets brick...I don't want the shit building up within my accesspprt. I guess my question is to the Dialed Mounts brand, how many people have you heard of having these ac issues and don't tell me none.cause then I know your lying as we already have 1 on here. And I want to state I already bought and own the mount but just curious and concerned b4 install.
Is that a 3D print plastic?
@loko4psp
4 жыл бұрын
Yes it is
I'm looking for this product for my 2014 sti hatchback and I can't find it. Can you tell me if it's still available please?
@SubiSpeed
Жыл бұрын
what part are you looking for?
@manso21
Жыл бұрын
@@SubiSpeed I need the base of my access port that goes on the top left vent on the dash and I can't find it no where.
I had my AccesPort hardwired and it kept draining my battery. Anyone else have that problem or know how to fix it?
@drlewcifer6278
4 жыл бұрын
Did you set it to auto turn off?
@mikjamdig85
4 жыл бұрын
@@drlewcifer6278 I believe so, it was never running when the car was off.
How close does the top of the Cobb get to the front windshield. Can you still use a sun guard with the Cobb in.
@SubiSpeed
4 жыл бұрын
It is fairly close but not close enough to make it difficult to install and remove the accessport. I would think there is still enough room in there.
@xsliick
4 жыл бұрын
I always take my AP off when putting on my sun shade. Just too little room for my OEM one.
@GastonMProductions
3 жыл бұрын
Mine sits pretty close. Can’t even put in or take off the accessport without scraping the windshield a little and leaving marks. Definitely not enough room for my subie OEM sun visor. Might see if I can tweak it a little to make it fit better but definitely a little too tight for my liking
Will this work for RHD models?
@SubiSpeed
4 жыл бұрын
Unfortunately, this can only be installed on the left side vent.
@robertbakoczy1985
4 жыл бұрын
@@SubiSpeed We do offer a RHD version now!
So the defrost won’t cook the AP? Especially in Midwest winters? 🤔
@isaacgomez5730
4 жыл бұрын
If the summer heat doesn't then the defroster definitely isn't
@tommanning7337
4 жыл бұрын
Isaac Gomez good point
@mrhavoc2415
4 жыл бұрын
Yeah, I leave mine in the car a lot during the Arizona summer and haven't had an issue yet
Soo yea I mean that piece that goes on the cable is not just a “click In” I won’t even go in into place
Nice! Speaking of Defrosters, I ordered my Gurney 3 days ago and I still don't have a tracking number!!
@SubiSpeed
4 жыл бұрын
Carlos, you ordered on a Saturday. We are closed on the weekends so your order was not processed until Monday and shipped out Tuesday. Please check your spam folder for your tracking just in case it happened to go in there. It is scheduled to be delivered on Thursday according to UPS.
@sirfrancisbacon4344
4 жыл бұрын
Lol
@ronniedarko2536
4 жыл бұрын
SubiSpeed he was excited 😆 you should do 1 hour shipping.
be careful with this. I had to basically re glue and fix this when I got it. the magnet fell apart after 2 days. I had to get gorilla glue and fix it. also on the company's site it shows a different style then what they sent you. ( not subiespeed) the company that makes them.
I worry about condensation with this
Where's the Forester?!
@SubiSpeed
4 жыл бұрын
Dialed Mounts doesn't offer a mount for the Forester.
@SOLIDUS-px3jw
4 жыл бұрын
@@SubiSpeed 😭 how bout anything Forester other than what you've already shown 🙂
There’s no way the freaking bolts actually tighten down. Mine went maybe a quarter or half tight and won’t tighten all the way
AND.... they're always out of stock. :(
@alexanderhess1977
2 жыл бұрын
I purchased one in November 2021. Im aware they are not the manufacturer. I understood i would be on a waiting list, but wasn't aware i would still as of june 9 of 2022 be waiting. I contacted the manufacturer and they are still making them.
bro u need new shoes
Shitty you guys fired him and still use these videos
Imparing the drivers view, is illegal in some states. Wait till you get that hefty ticket. Whooo