Love it when you take one of your viewer's ideas and make it a reality! It was my suggestion to do the dirty pour on corn hole boards! Turned out great.

@LeggariProducts

4 жыл бұрын

Thanks Robert for the suggestion. We like to take our viewers ideas and create something for them.

@RCP3Kids

4 жыл бұрын

@@LeggariProducts Which is great and I'm flattered you did but you should give a shout out when you do! Quick question what did the boards cost from build to final topcoat? I see these as high-end boards that could have a market depending on cost. Could be customized for a lot of things!

Turned out awesome, love the colors 😁👍

@LeggariProducts

4 жыл бұрын

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

They Look Awesome!!

@LeggariProducts

4 жыл бұрын

Thanks for the comment and for watching the video

That is beautiful!

@LeggariProducts

4 жыл бұрын

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

I really love this one..

@LeggariProducts

4 жыл бұрын

Thanks Nancy for the comment and for watching the video

I love it ,Thank you.

@LeggariProducts

4 жыл бұрын

Thanks you for watching the video Layla.

Its beautiful

@LeggariProducts

4 жыл бұрын

Thanks Mohammed for watching and commenting on the video

love it...........

I've learned so much from your videos! I love all of them! Please tell me, what are you rolling on at the very end of this video? Thanks so much!

@bxb.financial.freedom

3 жыл бұрын

I’d like to know the same thing!

How much epic would I need to do a set of cornhole boards. Maybe 1/8” thick

Looks great, WHAT did you ROLL on after epoxy was done

@andresguzman3654

4 жыл бұрын

Probably a sealant to weather-proof it somehow

@jerseegrl2

3 жыл бұрын

I want to know this as well.

@angelatrice9611

3 жыл бұрын

Yes, that was my question. They haven't answered. I'm going to ask again in a separate box. Maybe we will get er an answer.

What was sprayed on the epoxy after the pour before the WB poly

Hey guys..love your videos..im wondering if you guys have a video or can do one showing how to get stone or quartz look in earth tone colors..its always black or white or something.. Like a tan or khaki with sto ne speckles..thanks !!

@LeggariProducts

4 жыл бұрын

Kevin, we will add that to our video list. We do have videos on our KZread page doing a quartz countertop look already. Thanks

Hey I’m thinking about doing a clear epoxy on my boards. With the epoxy on the boards are not to slippery where the bags slide off? My boards don’t let the bags slide at all and I would like to protect the decal so that’s why I’m looking to epoxy them.

@LeggariProducts

4 жыл бұрын

We haven't had an issue with the bags not sliding on the epoxy. We have made several of them and they work amazing.

Isn’t the epoxy surface to slick for cornhole bags?

Great video. How much epoxy does it take to cover the boards? How many pours?

@paulrodriguez5830

9 ай бұрын

Usually, 3oz per square foot is what most people use.

Could this be done on a floor?

How long did you wait before you pulled the tape,and started to brush the sides? That is beautiful, I love the shine. I’ve been looking into doing this on my cornhole tops, but I always doubt myself, so I never do it.

@paulrodriguez5830

9 ай бұрын

Usually, wait about an hour to pull the tape off. Go tip is to pour a little on a scrap piece of wood and go back to it to see how much it's hardened up.

What did you roll on at the end? What was that?

How much did that beautiful piece cost to make?

@LeggariProducts

4 жыл бұрын

The epoxy alone is around $150 and to build it was roughly $50. Thanks for watching the video

Can you do something Christmas theme? I’m looking for an art project with the kids

@LeggariProducts

4 жыл бұрын

They are coming out with a Christmas theme video shortly. Stay tuned. Thanks

Hi!! Sorry to ask again but in the 4:30 minute before spraying with the isopropyl alcohol dispenser you see that a transparent product is applied with an aerosol that is also isopropyl alcohol or another substance or solvent? thanks guys!!

@acobelo

4 жыл бұрын

Clarification: spray in hand with green glove !! Thanks and regards from Argentina

@LeggariProducts

4 жыл бұрын

He is using the clear isopropyl alcohol at that time frame to give it the dispersing effect.

Hi great job!! What is sprays(laca?) pre alcohol isopropyl dispersing effect? Minute 4:30 in the video. Thanks. Sory my inglish is very bat!! My country its argentain (argentina) saludos guys!! Good job

@LeggariProducts

4 жыл бұрын

He is using isopropyl alcohol to give the dispersing effects in the epoxy.

I thought they were going to turn our smooth and shiny,

So you put the epoxy on then what is the whiteish top coat you used and why put that over the epoxy? What is it for?

@LeggariProducts

4 жыл бұрын

That is our urethane top coat and he applies it to make the surface more durable.

if I use plastic board do it need any primer ?

@LeggariProducts

4 жыл бұрын

Yes you will want to use a primer so the epoxy will adhere to the surface. Thanks

What did you tape on the sides to stop run off?

@LeggariProducts

4 жыл бұрын

We just let it drip then we scrape the edges every so often.

@Thorpe73

4 жыл бұрын

@@LeggariProducts ok just checking. There was some masking tape or something taped on edges wanted to make sure what kind before i tried.

how are you getting the air bubbles out?

@LeggariProducts

4 жыл бұрын

Stan Krieger we typically done have any air bubble issues with our resin. There’s no torch required. At the very least you can mist the top with denatured alcohol if there are a few. Thanks!

Clarification: spray in hand with green glove !! Thanks and regards from Argentina

@LeggariProducts

4 жыл бұрын

He is using the clear isopropyl alcohol at that time frame to give it the dispersing effect.

What's the color formula

Can I put epoxy over a vinyl that covers the whole board?

@LeggariProducts

4 жыл бұрын

Yes! If you email Cody@leggari.com our head tech can give you info on this!

@LeggariProducts

4 жыл бұрын

You can contact our techs at 844-534-4274 ext. 1 and they can assist you.

@joelt8915

4 жыл бұрын

Already figured it out. Spray with a poly first. I’m not contacting anyone. This is youtube. Reply with the answer and you gain/retain a subscriptions.

What happened to the shine?

@BlackCat_2

4 жыл бұрын

From the description - "used our WB urethane gloss top coat to finish it all!" and that is what happened to the shine. I understand the need for that considering its intended use but it takes away from it for sure.

@laserfalcon

4 жыл бұрын

@@BlackCat_2 Still looked very cool, never thought about epoxy for these games,

@LeggariProducts

4 жыл бұрын

We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish.

What kind of tape is that? I tried using painters tape and the epoxy just eventually pushes through it. I tried allowing it to flow over edge but it just becomes to think on top and too many coats. Also, is that just black paint or is it primer?

@LeggariProducts

4 жыл бұрын

We used masking tape for the edges. That's black primer, it comes in our kits!

Love this!! Do you guys sell the raw wood boards??

@darlingsepoxysolutions2558

4 жыл бұрын

I do

@LeggariProducts

4 жыл бұрын

No we do not, we bought the wood from Home Depot and made them ourselves. Thanks

What colors are you using

@LeggariProducts

4 жыл бұрын

The color combo is brass, black, titanium, silver, and khaki.

@mespinosars

4 жыл бұрын

Thank you

Hey . Can you tell me where I can buy the epoxy in Dallas ?

@LeggariProducts

4 жыл бұрын

We do not have any distributors at this time, we only sell the product on our website at www.leggari.com. Thanks

O que é, essa base sobre a madeira?

@LeggariProducts

4 жыл бұрын

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

That shit is expensive as hell