This was helpful in a different way than I was expecting. I'm trying to learn how to add a bowl bit to my tool database. But there were other things that I learned in this video. I look forward to checking out some of your other videos.

Thanks for the tip on making bowls.

@BillGriggs

4 ай бұрын

My pleasure.

Nice, Bill! Thanks for the lead on the bowl bit!

Bill, nice video. It is refreshing to hear you speak in a voice that is easy to understand and does not rush our ears along to follow. I enjoyed the video because it is concise and shows up the tools needed to make these pocket type cuts. Well lit and good audio. No silent type of video where we would only see cursors bouncing around.

@BillGriggs

4 жыл бұрын

Thanks Lee. Glad it was helpful.

Thanks for the tip on making bowls and using the array tool, which I never used before. Look forward to seeing more tips from you. Job well done.

@BillGriggs

4 жыл бұрын

My pleasure. VCarve is a wonderful software.

Thank you for your time sharing your knowledge.

@BillGriggs

Жыл бұрын

My pleasure.

Great job Bill.

Just discovered you Bill. Love the video. Really helps in my skill level

Thank you for sharing your knowledge with this awesome video. I used the concept to create a serving tray and used the pockets for small snacks, it came out great.

@BillGriggs

3 жыл бұрын

That is fantastic.

Great video Bill! I learned a lot !!

Really good video. Clear explanation.

@BillGriggs

7 ай бұрын

Thanks I appreciate the feedback.

thanks,,good video

Great video. Very informative.

Good morning ans Merry Christmas just found this video and it is very good and has helped me alot. In the picture you showed here of the dip bowl It looked like there was a dip bowl that looked like a boat shape. it that is correct could you post a picture of what it looked like on the inside. Thanks Jeff Perers

Nice video Sir.... thank you so much

Thank you. Your carving time for the pockets with 45 minutes ist quite long. If you use an end mill first and the ballnose bit last you will gain a lot of speed. But of course you then have to draw the fillets unless you use the same size end mill - which I personally do not have. Mainly I use for pockets a 6 or 8 mm end mill.

@BillGriggs

2 жыл бұрын

Thanks for the feed back. The video was made to show the technique, not how to optimize it. If I were doing this process in production there are many ways to drop the milling time. Perhaps I should revisit this topic with a mind towards showing how to optimize the process? What do you think?

Thanks Bill. Saved me some time doing fillets for no reason.

@BillGriggs

3 жыл бұрын

Glad that helped Dwayne. I was kicking myself the first time I discovered that shortcut.

Could you go over gear layout in the future. Pls. Look forward to your pod casts

@BillGriggs

6 жыл бұрын

What type of gear Don?

Cool

Thanks that helped abunch

@BillGriggs

Жыл бұрын

Glad to hear it Robert.

Bill, just want to let you know, i ordered that router bit. Showing my love, but, I need a little love back. Can you give me information on the bit so I can add it to my tool profile? Maybe a Video.....

@BillGriggs

6 жыл бұрын

Sure send me an email billgriggs@themakersguide.com

Hey Bill, I'd like to try this project on a CNC Shopbot but making the bowls with a depth of 1.75". Can you help me find a similar bit with a longer shaft?

@rbwoodwork1890

4 жыл бұрын

Stephanie Sulik you can use a bit extender. They are fairly inexpensive. Hope this helps.

way to go bill

I'm pretty sure you can still buy plans with all the details you need on Woodprix.

My adventure with woodworking started with Woodglut.

This should probably be renamed "How to make a serving tray". This isnt a bowl.