I just bought a power up tilt plate for a 63 Mercury 350. Putting it on my 1955 cedar strip all because I don't want to climb over the seats to tilt the motor. Thanks for the video

I put one on my 1451MV last fall, Well worth the expense. I gained 4 mph to my original top speed.

Excellent video brother

Thats crazy the place that boat was sold from, was where I use to live. They sell some good stuff there. I also se le that you are in AZ, me too. Its a small world.

I needed the next size up. The prices now are doubled from when I first looked at it. My procrastination has gotten the best of me. I ordered a panther marine 55

Can you add a video on filing the hydraulic fluid in a cmc jackplate please.

its a really good option alright, but you mounted it to low, so you will have problems when the screw clamps hit the transom.

I have been to the place your boat is originally from. It’s about 20 mins away from my house lol small world..

I have had the exact same CMC on my 1542 Xpress duck boat for 6 years I love it. It really makes a big difference and helps when I want to get into shallow water. I never mounted the switch anywhere I just hold mine as I drive . Where did you put yours?

Nice video. Im new to boats. I bout a jon boat that has the same tilt plate but it seems to be mounted to high. About 2 inches. when I get up on plane after a about 60 seconds it cavitates. Any suggestions to fix this would be appreciated.

Good video how much is that plate

I saw this jackplate on another channel and thought you would like it.

@chriswilson8911

3 жыл бұрын

www.ontheflyjackplates.com/shop/

Do you recommend this or the bobs for my new f25 on a lund 1600 fury? Thanks

so the motor is holding onto 2 bolds at the transom side where the tilt and trim is happening?

Well I planned on buying it for my boat, I have that same motor, but the clamp bolts are a problem, so probably going to keep looking

@kwooz19

2 жыл бұрын

The clamp bolts are not a problem, if the PT-35 is mounted correctly. go to this site www.cmcsales.com.au/wp-content/uploads/2012/11/Fitting-a-PT-35.pdf

I'm putting one of these on the exact same model of alumacraft. Got mine mocked up but it looks like there's a screwhead at the bottom of the transom that it's hitting. Looks like you just mounted right over the screw - guess that's ok?

So my new 16x48 tracker grizzly’s transom is too tall for my mud buddy surface drive 23 hp. Does a jack plate only work for raising the motor? I need about 4”-6”” lower so the prop is in the water

Hi I'd like to know how many inches does c m c Raises the motor Is on the transom. Because I got a 25hp Clamp on long shaft and I need to raise it about at least 3" Cause my cavitation plate sits too low below the boat and getting back spray Over the transsome so I'm getting a lot of water in the boat. Thank you

Did the CMC tilt and trim add any speed?

My tiller broke a few days ago and it won't go into gear

Mounting one of these to a th marine micro jacker on the back of my 12ft livingston hoping it doesn't put my motor to far back

@jerryv4306

2 жыл бұрын

Brett, I understand this comment is from awhile ago but hopefully you see it. I have the same idea about mounting this to a micro jacker. Did you have any luck with completing that project? Would love to hear about it. Thanks in advance, Jerry

@Turbotalkin

2 жыл бұрын

@@jerryv4306 yes I did works extremely well 40mph in 5 inch of water I tell my friends dont follow me hahah

Hola soy dr argentina y estos productos nunca llegan, tengo el mismo motor pero 20hp . Me podrias decir que espesor tiene el aluminio que usa rl soporte, por si lo puedo hacer, desde ya muchas gracias

My goodness I have the exact same motor, never used it yet, really confused about what height to put the jack plate my instructions don't say anything about it. Shouldn't the part of the plate where the motor sits on be the exact same height as the transom, that seems to make sense.

1548 Xpress duck boat

Do they make this for 200 hp ?

Did you ever figure out a modification to avoid the clamp handles from hitting the transom when tilted up?

@TinyBoatNation

Жыл бұрын

I took them off. The motor was permanently mounted to the jack plate. I didn’t plan on taking it on and off so I took the clamps off.

Onde encontro essa péssa

So a micro atlas jackplate can be mounted onto this CMC power tilt?

@jerryv4306

2 жыл бұрын

I think the micro jacker would be mounted first and then the CMC tilt and trim would be mounted to that. I’m curious myself if this would work and how functional it would be

Do you know where I can get an old vintage steel gas tank for my 14 ft Meyers aluminum fishing boat?

@Juelz2226

3 жыл бұрын

@@TinyBoatNation I just got an adapter for the new plastic tanks but your channel is awesome and you give so much good information and great ideas. Thanks also for getting back so quickly!! Thanks again!!

Do you link for the CMC things. I own 25hp too. Planning to install that on my boat.

@TinyBoatNation

2 жыл бұрын

tbnation.net/pages/search-results-page?q=cmc%20pt-35%20tilt%20and%20trim

did you hook up the cmc to your cranking battery or deep cycle battery?

@chadbosko8935

9 ай бұрын

Hi I'm looking into doing this also, I have a 2000lb winch in my boat that pulls up super heavy stuff and it's hooked to my deep cycle but motors that come with power tilt are hooked to the starting battery so I would think you could go either way, just trying to help.

Do you think this bracket would be ok for an older merc 40ph 2 stroke? I know it says only rated for 35HP.

@kwooz19

2 жыл бұрын

Yep, they handle a 40 hp, no problems

@darthjar9117

11 ай бұрын

@@kwooz19are the mercs from the 80s heavier than current models? I have an old mercury 40 and was wondering it this will work with it

Off the topic question, but if you have a bilge pump and your boat is fully foamed, then why do you need a drain plug?

@alphacapo

3 жыл бұрын

It would be pretty dumb not to have one. Even tho I rarely remove mine. If yur on the trailer and it rains hard. Pull plug.....let water out. Or your bilge can't keep up on the water. You pull the plug once you get up on plane the water sucks out....put the plug back in while up on plane.

@omieyouknowme

3 жыл бұрын

@@TinyBoatNation most states have law, plug removed during transport on road from to waters. Also as said pull the plug give water a place to drain when it rains or snows

will this mount to 15" transoms?

@VKOutdoors

3 жыл бұрын

If this mounts to a 15’’ transom, do you need to get a long shaft engine or will a short shaft engine work also?

Do you think this would work with a 40hp 2 stroke yamaha. I know there rated for up to 35hp. Would that extra 5hp really matter? As being a 2 stroke it's light

@ThePulzeGamer

4 жыл бұрын

@Lteo Hrnt Yeah I was thinking I would need to get the bigger version sadly

@alphacapo

3 жыл бұрын

@@ThePulzeGamer that yammy is light. I have a 30 and it's only 109 lbs the 40 isn't much heavier or bigger. You can get away with the pt35...as long as it mounts and clears

@ThePulzeGamer

3 жыл бұрын

@@alphacapo I hope so, like its only 5hp over the rating it really can't make too much difference as the yams are light!

@alphacapo

3 жыл бұрын

@@ThePulzeGamer yea the new 30hp 4s. Are 160lbs give or take depending on the brand. I'm looking at this unit as I don't have power trim and have been unable to source one for my 1986 yammy. I figure if I get this I get set back and power trim. Too bad the height isn't manually adjustable. Have to play around with shimming the motor at different heights to find where she goes best...before drilling holes in trim unit and mounting ...I'm guessing highest you can go without prop blowing out in a full turn...would be right

I got a used one that works but only the two wires coming out the unit. No relays. Can I rig it without any relays? Help pleas

@TinyBoatNation

Жыл бұрын

You can, but you risk blowing the unit and ruining the switch.

@lmt-adventures620

Жыл бұрын

@@TinyBoatNation Okay thanks il play it safe and get a wiring harness with relays

Why do they call this a tilt and trim? I understand that it is tilting. But wouldn't triming be moving vertical up and down?

@TinyBoatNation

Жыл бұрын

I’m pretty sure it’s just called the power tilt

Hello. How high should the engine be raised with this installation?

@TinyBoatNation

2 жыл бұрын

Mount the plate an inch over the transom. It should be good for most stock heights at that setting. You can always just mount it flush. It raises backward to offset the extension naturally.

The trim and tilt is too expensive