√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

Just turn the radio up loud to drown out the noise.

Im dealing with this now. I just replaced struts, lower control arm, ball joint and outter tie rods and im getting a clunking noise after about 2 months

Dude, thank you a million times! I replaced all of my front end suspension and ended up with a popping noise that 4 shops couldn’t find. Kept getting told everything was fine. I thought the tightening specs on the links were low. I’ve always smashed those bushings to about about the size of the washer on top of them but this I didn’t. After your video I jacked it up, noticed a bit of play, smashed em down and bam! Noise gone. It was driving me crazy. Thank you so much!

My mechanic and Hyundai told me clunking sound from car when accelerating is transfer case, quoted me $4k to replace. I inspected myself and found stabiliser link and wheel bearing as noisy, replaced both and clunking noise is gone. Cost me $200 in parts

Great video. Some of the trackday crowd advises to wrap the swaybar with teflon tape to avoid metal-on-rubber contact when the silicone grease eventually wears off or dries out. The teflon tape is mostly to avoid annoying squeaky sounds, but I think this could help the swaybar rotate smoothly and keep the car behaving predictably.

This channel helped me and my boyfriend my boyfriend was able to save me a lot of money by learning how to change my rotor and calipers on my car from this channel now there’s something new I can add to the list of things I’ve learned incase I run into this problem thanks 1A-auto😊

Great video. I like how you actually work on rusty vehicles like mine and not pristine or new ones where everything comes apart easily!

@NeutronX101

7 ай бұрын

This is supposed to be educational to teach people.

@briana3544

6 ай бұрын

@@NeutronX101 That's what I mean! At least they show it on used, rusty vehicles where stuff doesn't always come apart so easily.

I purchased sway bar link from 1A auto for my camry and the quality of parts is very heavy duty and outstanding 👌 I highly recommend that

I've been chasing a rattle at the front-end. Replaced control arms and mounts. Never thought to check swaybar bushings ! 😮

Thanks 🙏🏾🙏🏾 this was really really helpful

I really appreciate this video I have a 99 Ford F-250 on a 4 inch lift so I probably need to check all of that out what you just explained especially before I take her in the mud LOL

Thank you for teaching me something new.

Haha. Nice. My 2014 scion tc front left makes a knockong sound. Over rough roads driving straight it rattles. But turning the wheel on curves while driving it doesnt rattle as much. Mainly on the driver side. Looks like i have an idea of where to look now. Sweet.

Great educational video!

Excellent video very easy to follow thank you

Thank you bro now I can do bushings on my Crosstrek

Excellent no b.s video, very professional and straight to the point, thankyou from Oz ❤

Very helpful thanks!!!

Thank you for this video.

Thanks so much for info

Great !

Thankyou !! ❤

Very helpful, thank you:)

So how bad is it to not change it immediately?

If only the bushings where this easy to replace on all vehicles. Had to do it on and early 2000s cavalier and it was the worst. The car was not worth all the problems it had. The wisconsin weather really did a number on the car. But it was my ex's grandmas car so i tried my best to keep it safe and working for her.

Thank you…well done!

Nice video! About to get this replaced

This video was really helpful

Great video thank you.

My Scion TC is making this sound even after changing struts/balljoint + lower control arm. Sway bar link looked good nothing torn but I did not check the sway bar bushing. Intro of this video convinced me it's the same clunk ass noise it's making under on both side driver and passenger on speed bumps.

@1AAuto

8 ай бұрын

+Henry Kim We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Great video! Well done! Thanks! 🏆

Very nice! Local repair network had absolutely NO IDEA what to do for 3 years. Sold the car in the enc.

This was an awesome vid! Great explanation of everything.

Best channel on youtube. So informative.

what a great vid. I love the explaining what the parts do for the car!! 1a auto rules!

Very nice! Show me how to fix rotted parts of a 4th gen 4Runner frame? Please?

Thanks much for your video. I didn't know this. I bought new bushings for my 2000 Camry LE back sway bar. So the bushings are on bear metal. A mechanic put the new bushings on I didn't watch him. Oh geez. I've been wanting to put heavier sway bars on the Camry. I'm customizing the Camry. So where do I buy silicone paste?

This is the information I seek in my feed!! This awesome!!

@1AAuto

4 ай бұрын

+@michaelgalindo5931 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

great video👍 helpful👍👍

I've replaced everything except those. Hopefully, that will fix the knocking sound. Everything else did need to be replaced.

Excellent video !!!

Does one have to lose the bolts holding the sway bar links? Or one can change them bushings just by removing the brackets?

What's the typical charger on getting that bushing replaced on the sway bar... I have a 2015 and I need that done I believe

Very educative videos...big up

My 2015 Subaru Forester XT rattles and shakes past 55/ 60 mph. If I slightly turn the steering wheel while driving or making a turn at a similar speed or faster it stops the shaking. Now that the check engine light randomly comes on the rattling/ shaking has stopped. When the check engine light is off the shakiness comes back at 55 mph or faster... Guess ill check sway bar end link's and bushings.

@1AAuto

7 ай бұрын

+Dan D We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

I would have sanded the sway bar a little bit and got the surface smooth before putting the bushing on.

Props to the driver for putting their safety and the safety of everybody else at risk to get that video

@iulianc9037

6 ай бұрын

No need to dramatize. Road traffic was not endangered by that broken bushing. There are vehicles that don't even have a Sway Bar.

Great video. That truck has a ton of rust underneath. It must be in a northern state, lol.

5:31 thank u

Question do the vehicle need too be off the ground too check this????

I feel terrible for the people that drive in the rust belt or where they salt the roads. 😢

I have a 2007 Chevy Silverado 2500hd classic crew cab 6.0 liter gas engine 4wd. Same noise. I rebuilt the entire front end...still happening. No play in the sway bar at all. Any ideas? I've been told replacing the body mounts are the issue, but others have said no it's not. Help!

Are the ebay and Amazon parts any good, or do we need brand names or oem parts, Thanks for any answers!

i have a xtpe jag, 2005. i have changed these bushes and tirods, springs, shocks, bushes where the shocks connect to upper part of the body and one of the arms. I still get a knocking sound on N/S rear wheel. my mechanic has run out of ideas and i run out of cash!. any idea what might be causing it? thanks.

@1AAuto

6 ай бұрын

+@tekinmoustafa8141 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

What would cause the truck to feel like it's swaying a little. It was just aligned and a parts were checked.. seemed good.

👍

Look at those Rusts .

how do you fix rust on a car?

Excellent video! My wife likes you... ha ha.

My swaybar does minimal movement nothing close to this only wehn i apply significant force with a pry bar. There is no metal noise. Is this normal? I am trying to diagnose a suspension issue and not sure what part is causing it.

Mine sound like this but only when I reverse at an angle and drive

whats the torque spec

The clucking could also be bad sway bar bushings and are bad sway bar end links

You failed to mention the cv axle.

What would cause my 2005 dodge ram 1500 rear end to squaek

Clunking or Rattlling under your car and suspension seems fine? *Probably The Neighbours Cat*

My car is currently doing this at 35k miles. Is it dangerous to drive even around?

2 bolts missing to the right control arm over your head

Thats is the culprit that peeple overlook. I know i did.

Chuckled 2:19

I've seen a lot worse from these 😂😂😂

That noise would never be a ball jlint

"CLUNKING NOISES" started from my Marriage shortly after starting,....."SwayBar" needs ADJUSTING😊 (Its NOT a 'Singles Bar' Darling, its a SOCIAL GATHERING, She said😂,....she sure does like "SOCIAL GATHERINGS" I thought...... THAT is the EXACT MOMENT my SWAYBAR BUSHINGS needed some Jacking UP) Just SMILE, and hit "LIKE" You KNOW you 'RELATE'😂❤😂

Good video but I would never purchase anything off you guys again apparently your guys ball joints are made in China and we’re non grease-able I installed your guys kit on my 89 GMC Sierra shortbed which is basically a project truck so it’ll hardly get driven It was installed 2019 and my ball joint popped out the a-arm while driving 25 mph hitting a corner I was stranded for a hour and could of died if I got as on a freeway this was 2022 again this truck was a project truck hardly ever drove ball joints should last 75k-150k miles and I am mechanically incline so it’s crazy I paid $130 for that whole kit which came with pit arm idler arm inner and outer tie rods upper and lower ball joints 🚩 I ended up paying $320 for just upper and lower ball joints (moog problem solvers) pay once cry once my buddy always said well now I know 😢

Show us how to do the rear sway bar bushings on an SUV like the first generation Honda Pilot.