Final assembly of the Club Kart has finally begun!
Жүктеу.....
Пікірлер: 19
@TheShadeTreeFixitMan6 ай бұрын
Nest time around you might want to use truck bed liner inside the tub. I have used it on my Goofy Cart build and it is very durable. Your cart is looking great and nice to see it going together so smoothly.
@DannyBasinger6 ай бұрын
Hi Dennis, this is Danny Basinger in North Carolina. I want to thank you for doing these videos. It helps a lot!
@johnblanton-fd3jf
6 ай бұрын
Hey Danny! What part of NC are you located? I'm in the Boone area and getting ready to build a cyclekart , recently received the frame plans.
@DannyBasinger
6 ай бұрын
@@johnblanton-fd3jf I’m in Gold Hill, about 40 miles north of Charlotte just below Salisbury. I’ve got a little project to finish and I plan on starting my cyclekart around February.
@johnblanton-fd3jf
6 ай бұрын
@@DannyBasinger That’s great! I have family in Lincolnton, so I get down that way every so often. A friend of mine is a retired professional welder and we may be starting a frame or two sometime in January. We’ll have to keep in touch about our progress. Good luck !
@DannyBasinger
6 ай бұрын
Sure thing! Are you on Facebook? If so, I can message you my number.
@tomtruesdale69016 ай бұрын
Club kart is looking fine Dennis. You, Steve and your helpers are doing a great job on it. Time to get back to working on mine.
@Sonorasid5 ай бұрын
Looking good! That sure is a pretty color red. I’m looking forward to seeing the finished product
@timkern4625 ай бұрын
Looking like it's real! Good tips on the paint, too. Thanks.
@randyanderson56536 ай бұрын
Nice rolling Chassis!! Im looking forward to building mine.
@axelzanelli64756 ай бұрын
Great job Dennis! Thank you for sharing, see you at Huntsville. Merry Christmas to you and yours!
@whatupg16 ай бұрын
Beautiful, thanks for sharing. Have you some details please on the differential?
@d.thomas15416 ай бұрын
Shiny! Nicely done video, Dennis. Who gets to drive it in next race? Where is Huntsville?
@carlosgomesribeiro95694 ай бұрын
Olá Dennis, me chamo Carlos e sou do Brasil, otimo trabalho e video muito bem detalhado, parabens. Venho acompanhando seus videos na intensão de conhecer mais e ter experiencia no projeto e montagem dos veiculos. OBS: voce é da Australia?
@UHO221Ай бұрын
👍👍👍👍❤️❤️❤️
@jimidasaint6 ай бұрын
Dennis, shouldn’t you have washers behind those nuts on the real axel braces? I notice you tightened bare nuts straight onto the painted inner frame.
@Hollywood4Fun2 ай бұрын
Are those motorcycle wheels and tires?
@timsimpson45793 ай бұрын
Howdty Dennis, I’ve researched the Pearless dif, bit confused on which is correct. Can you point me in the right direction? Also, I intend to make my own front spindle assemblies. One more thing I can’t find is length and diameter of the actual axel I.e. hardened bolt. I’m hopeful you can point me in the right direction. Tim in Maine, first timer, frame complete.
@user-ty4tq5uo9n3 ай бұрын
Hl soy colombiano y necesito unos repuestos para un visitaxi
Пікірлер: 19
Nest time around you might want to use truck bed liner inside the tub. I have used it on my Goofy Cart build and it is very durable. Your cart is looking great and nice to see it going together so smoothly.
Hi Dennis, this is Danny Basinger in North Carolina. I want to thank you for doing these videos. It helps a lot!
@johnblanton-fd3jf
6 ай бұрын
Hey Danny! What part of NC are you located? I'm in the Boone area and getting ready to build a cyclekart , recently received the frame plans.
@DannyBasinger
6 ай бұрын
@@johnblanton-fd3jf I’m in Gold Hill, about 40 miles north of Charlotte just below Salisbury. I’ve got a little project to finish and I plan on starting my cyclekart around February.
@johnblanton-fd3jf
6 ай бұрын
@@DannyBasinger That’s great! I have family in Lincolnton, so I get down that way every so often. A friend of mine is a retired professional welder and we may be starting a frame or two sometime in January. We’ll have to keep in touch about our progress. Good luck !
@DannyBasinger
6 ай бұрын
Sure thing! Are you on Facebook? If so, I can message you my number.
Club kart is looking fine Dennis. You, Steve and your helpers are doing a great job on it. Time to get back to working on mine.
Looking good! That sure is a pretty color red. I’m looking forward to seeing the finished product
Looking like it's real! Good tips on the paint, too. Thanks.
Nice rolling Chassis!! Im looking forward to building mine.
Great job Dennis! Thank you for sharing, see you at Huntsville. Merry Christmas to you and yours!
Beautiful, thanks for sharing. Have you some details please on the differential?
Shiny! Nicely done video, Dennis. Who gets to drive it in next race? Where is Huntsville?
Olá Dennis, me chamo Carlos e sou do Brasil, otimo trabalho e video muito bem detalhado, parabens. Venho acompanhando seus videos na intensão de conhecer mais e ter experiencia no projeto e montagem dos veiculos. OBS: voce é da Australia?
👍👍👍👍❤️❤️❤️
Dennis, shouldn’t you have washers behind those nuts on the real axel braces? I notice you tightened bare nuts straight onto the painted inner frame.
Are those motorcycle wheels and tires?
Howdty Dennis, I’ve researched the Pearless dif, bit confused on which is correct. Can you point me in the right direction? Also, I intend to make my own front spindle assemblies. One more thing I can’t find is length and diameter of the actual axel I.e. hardened bolt. I’m hopeful you can point me in the right direction. Tim in Maine, first timer, frame complete.
Hl soy colombiano y necesito unos repuestos para un visitaxi