Clock Spring Replacement 2013 Toyota Corolla 2006-2014
Автокөліктер мен көлік құралдары
Buy steering wheel airbag clock spring here: ebay.us/bZXzOW
Buy Olsa Tools here: rebrand.ly/TECH28
Use coupon code "tech28"
Buy Milwaukee Underbody Light here: ebay.us/aOy5R0
Buy caliper hanger hooks here: ebay.us/l15cWE
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network
Пікірлер: 24
Awesome video! Just fixed a good friend’s 2011 Corolla today using your video. You covered all the details and made the job straightforward. Thanks!!
@Tech-28
4 ай бұрын
Excellent, I’m glad. That’s the aim of making the videos that are on my channel, help as many people as possible
Good morning, I just wanted to ask one thing, I'm sorry, I'm not an expert, but just to be clear, the airbag simulator is only placed in containers that don't have short circuits. I meant for control a clock spring . thanks a lot
Thank you for telling us the torq spec I couldn't find it anywhere where online
@Tech-28
Ай бұрын
Your welcome, hope you enjoyed the video
Nice
@luicarlos882
4 ай бұрын
Your video fixed my problem thank you
If I replace the steering angle sensor does that have to get reprogrammed? My 2010 Corolla S has the EPS air bag brake light on and it's hard to steer. The RPM and speedometer aren't reading either. After some research I saw a few others got it fixed by replacing the SAS but I'm not sure if it needs to be reprogrammed
@Tech-28
10 күн бұрын
@@PULSARIONequinox1 no programming required for this repair
so i have the same toyota. my horn has been bad for a while, would replacing the clock spring fix it? i already checked the fuse and its fine.
@Tech-28
3 ай бұрын
It’s possible the clockspring is bad, it could be the horn itself as well
I got a 2019 corrola if i replaced the clock spring sensor do i have to get it programmed
@Tech-28
Ай бұрын
As long as everything stays in the same position the steering angle sensor doesn’t usually need to be calibrated. No programming required, it’s just A plug and play system
@ManuelGomez-rm1rt
Ай бұрын
@@Tech-28 thank u
@Tech-28
Ай бұрын
@@ManuelGomez-rm1rt your welcome
I had my clockspring replaced in a shop and had my vehicle returned without the radio working. They say the problem is unrelated and my radio just happened to die at that time. I don't believe them as the wiring technically connects to the radio and they've made a error on my car before. Is there any chance you'd be able to tell me if it's possible my radio isn't working because of a mistake while they changed the clockspring or its impossible for there to have developed a issue and the 2 are completely unrelated? Thank you.
@Tech-28
2 ай бұрын
Can you send me your 17 digit vin so I can look up a wiring diagram and see if that’s even possible and also what about the radio doesn’t work? Just doesn’t turn on at all or no volume or?
Im throwing a airbag code now?
@Tech-28
Ай бұрын
What code?
Leave the steering column bolt a little bit threaded! You never had a steering wheel hit your face !? Hit a huge face punch since you're pulling it with a lot of force! 😂😅😢 I had punched my face once!! I will never make the same mistake!😂😂
@Tech-28
6 ай бұрын
Damm, I have taken lots off and I haven’t had that happen. I guess there a first for everything tho
@johnnytardes6801
6 ай бұрын
@Tech-28 Yeah, it happened because I was rushed to do the job before closing time !
Does it need coding after replacing
@Tech-28
6 ай бұрын
Nope