Clock Repair - Jaeger LeCoultre Atmos Overhaul
Ойын-сауық
This video documents the process of how I perform a basic service to a Jaeger LeCoultre Atmos clock, and has been on my list of potential videos for awhile now. This concentrates on the disassembly, cleaning, reassembly and lubrication. Note: Not all repair processes are shown in the video. This was done to keep the video shorter, however a much longer video may be done in the future outlining all repairs and adjustments.
The entire process takes about 8 labor hours, depending on the issues, but I've condensed this down to less than 20 minutes. Though it may seem straightforward, I must state the following:
Please do not attempt servicing an Atmos clock unless you've been trained by a professional! This video is for entertainment purposes only, and any service you attempt is at your own risk.
I now offer Atmos servicing, as well as some mechanical watches, to the general public! Check out my channel for the link to our shop and shoot us a message if you wish to learn more!!
Also, you can come visit! Our shop is called Lakewood Clock Repair, and we're located around the Cleveland, OH area! Check out our website to learn more: www.lakewoodclockrepair.com
If you wish to help support this channel with small upgrades to my video equipment, please visit my Amazon wish list here:
www.amazon.com/hz/wishlist/ls...
Chapters:
00:00 - Intro
01:30 - Disclaimer!!
01:54 - Removing the Case
02:20 - Removing the Bellows
02:44 - Removing Hands & Dial
04:05 - Removing the Movement
04:52 - Disassembling rear part of Movement
06:14 - Disassembling Front Movement
07:59 - Removing Mainspring from Barrel
08:42 - Cleaning
09:18 - Checking Bellows
09:41 - Reinstalling Mainspring
10:39 - Reinstalling Hour Wheel & Bushing
10:57 - Reassembling Front Movement
12:16 - Reinstalling Pallet Fork
13:02 - Reassembling Back part of Movement
14:37 - Setting Beat
14:58 - Reinstalling Movement
15:21 - Manual Winding & Initial Testing
16:41 - Reinstalling the Bellows
17:24 - Assembling Dial
17:34 - Installing Hands & Final Cleaning
18:04 - Re-Testing
18:15 - Final Reassembly
Пікірлер: 33
Excellent job!!! The clock is still running perfectly!
@BrackenClockWorks
8 ай бұрын
Glad to hear it, sir!!!
Very good and concise description of how to carry out this service.
Nice to see you Back, what a beautiful clock and well presented video I hope to see more, all the best
@BrackenClockWorks
8 ай бұрын
Thank you kindly!
this is amazing! i am getting a atmos because of this video
Very interesting video, was curious exactly how the Atmos worked. That’s one crazy looking pallet fork and what looks like a post is used for banking pins to limit the forks movement. Thank you for the video!
What a beautiful clock!
👍Wow !! what a precision in your skill really flourishing my mind ❤
@BrackenClockWorks
8 ай бұрын
Thank you very much!
Remarkable. Thank You.
Thanks a lot for this video
Very enjoyable and informative video! 😎
@BrackenClockWorks
4 ай бұрын
Thanks! 👍
Really nice job on this Video. I service Atmos clocks and I enjoyed watching this. The only thing I didn't see was you poising the fork. I always do that. Maybe you did it off camera? Anyway I have been following you since your Seth Thomas videos (which I enjoyed as well!) and I am enjoying watching you grow. Well done.
@BrackenClockWorks
8 ай бұрын
Ah yes good eye, sir!! This video was shot back in August and got a new computer since then and the video file for that got lost during the migration (as did another part showing cleaning the top of the case and setting it in place).
Grande!!!!
Hola...felicitaciones ...excelente video..pregunta yo tengo un reloj igual al video ..pero atrasa mucho por dia...que puedo hacer...
you didn't mention poising the fork. This is the most difficult adjustment and is a frequent cause of the clock nut running.
@BrackenClockWorks
5 ай бұрын
Ah yes, good eye! I shot the video quite awhile before editing/posting, and during the process of transferring video files to a new computer that portion got lost, unfortunately. I may do a separate video on just that in the near future. Thanks! 😊
Hello. What type of Special Tool you use to remove the hands? I am looking for this tool? Thank you for your answer
Great video. Which liquid do you use in the washer to protect the finish?
@BrackenClockWorks
7 ай бұрын
I use L&R #566, which is a non-ammoniated watch cleaning solution, as well as L&R #3 rinsing solution. I haven't had any issues with it removing any finish or lacquer as long as heat isn't involved. Thanks!!
Thank you for a great video. I have a quick question. I recently had a 528 serviced. When it came back it keeps great time, but I've noticed the protruding little wire on the top is gone. I see the one in this video has one, as did my previous newer Atmos with a calendar and moonphase. What is the purpose of the little "hair" on top, and is it wrong not to have one up there?
@BrackenClockWorks
4 ай бұрын
That is the top of the suspension spring, and it's best to leave it long on top to allow for adjustments later in case of it needing another service. I recently ran across a similar one, but not only was the top of the suspension spring cut off, so was the top of the tapered pin that holds it in place. In order to remove it, I actually had to take the entire clock apart and break the suspension spring to remove it, then replace it. But it's best practice to leave it long.
Are you hopefully located in NJ ? if not can you recommend a reputable atmos service personnel in NJ. I have a 40 year old clock that is clean as a whistel but not working. I think it just needs a GOOD service cleaning like you just performed.
@BrackenClockWorks
2 ай бұрын
I am located in Cleveland, OH. And, unfortunately, I am unfamiliar with anyone in the NJ area that can help. Good luck in your search!
Do you have a shop? Most repair places discontinued repairing Atmos clocks.
@BrackenClockWorks
7 ай бұрын
That is most unfortunate!!! While I am currently affiliated with a repair shop, I do all Atmos repairs in my home shop due to their delicate nature and my specific setup. There's less of a chance for things to go wrong, limited interruption, and I can keep a better eye on them.
Where are you located at? How much would it cost for a full service. The clock I have is this exact clock in the video.
@BrackenClockWorks
5 ай бұрын
Send me a message via the email link on my channel, or through the Bracken ClockWorks facebook/instagram
@hardwired39466
5 ай бұрын
Will do. Thank you sir.
I got mine for 10$