No video
Clematis D-ring Rivet Hack
Hack to attach D-rings to top of Clematis for a crossbody strap using rivets
My Facebook Group: / friendsofdebbyhunker
Affiliate link to free pattern: bluecallapatte...
Hack to attach D-rings to top of Clematis for a crossbody strap using rivets
My Facebook Group: / friendsofdebbyhunker
Affiliate link to free pattern: bluecallapatte...
Пікірлер: 150
Brilliant idea. I've always disliked the D-ring on the side of the bag and this definitely solves that problem. Thank you for sharing.
Just watching this video again! omg has it been over 3 years Debby!!!!
@DebbyHunker
3 жыл бұрын
I know!!! Time sure flies!!!
Debby, I can’t tell you how many times I have recently copied this link and posted it. I kept at it, until I finally figured out how big to make the tab, how far away to sew the seam. I have been using it on small crossbody bags. It finishes so nicely! Thank you for sharing your ideas and knowledge!
@DebbyHunker
Жыл бұрын
Thank you Karen!!!
Debby Hunker, you are a genius!
What a great tutorial! I was looking for something other than the 'ears' to attach a crossbody to a smaller bag. Thank you
Debby I just want to thank you so much for your tutorial on the Clematis , I am a visual learner and it was a blessing to have your tutorial, tips and guidance! Thank you again so much! I made one today and its far from perfect but the next one I make will be much better my daughter and mom are already asking for one!
@DebbyHunker
7 жыл бұрын
Thank you so much for taking the time to write to me!!! I'm so glad I could help you!
Thanks for the great videos, Debbie. I'm making my first Clematis a a cross body bag. I don't carry a wallet so I've added the card slots and a zip pocket. I love this idea of the D ring hack.
@DebbyHunker
7 жыл бұрын
Thanks for your comment! I think you're going to love using this as a wallet/bag!
Hi Debby you probably won’t see this message since it’s been so long since you posted but omg this is what I’ve been looking for I really don’t like the way the original wristlet connector looked this is sooo much better I’m definitely trying this thank you!
@DebbyHunker
2 жыл бұрын
Thank you Kelly! I didn’t care for the original way either!
OH MY GOODNESS! I love this hack and am thinking about how to do this on a lot of other patterns I’ve made ❤❤
Brilliant! Thank you for making this video. I was just trying about this the other day. Now I see what I did wrong.
Debby Hunker that is brilliant! Love the rivets.
Awesome hack with the crossbody side tabs. If I had a rivet press I’d definitely do it that way.
WOW!!! I REALLY REALLY LOVE THIS! WILL DEFINITELY TRY THIS ON MY NEXT CLEMATIS, THANKS DEBBY.
Exactly what I wanted to do for the Clematis. Thank you!
I love, love this, I’m always looking for the best/most professional way to do everything and this is it for D ring tabs. Thank you, can’t wait to try it!
Great tutorial. Thank you. Love the look.
Another thorough tutorial for a brilliant hack. Thank you so much for sharing Debby, know you're appreciated.
@DebbyHunker
7 жыл бұрын
💖
What a clever idea! Your videos are excellent..I always look forward to them!
Really great hack with professional results ! Thank you Debby for your video efforts
I like your technique! Thx for sharing.
love it, so much nicer looking than the original
I love love love your videos...thanks for the great ideas and info for the wonderful workmanship! From a Calgarian living in Wisconsin!
@DebbyHunker
7 жыл бұрын
Thanks so much for taking the time to comment!
BRILLIANT!!!! I love your tutorials...you're a great teacher! I'm in the process of making my first leather clematis and am definitely going to use this hack for a cross body. Thank you again and please keep the videos coming😍
@DebbyHunker
7 жыл бұрын
Thank you so much Kim! I'm not planning on going anywhere!
@KimDeBrossard
7 жыл бұрын
Debby Hunker can I ask what are the measurements for your zipper tabs in this video?
@DebbyHunker
7 жыл бұрын
The finished size is 1/2" x width of zipper
@KimDeBrossard
7 жыл бұрын
Debby Hunker ok thank you
thank you Debbie. This is a brilliant video
Genius! Thanks for posting! Exactly what I needed for my Louis Vuitton Speedy for a shoulder strap!
With this idea, I'm starting to think a Clematis XXL might be in order!! 😆
Awesome bag and hack!
Hi Debby! I was wondering if sewing in the D ring loop at the time of sewing the top stitching would be an alternate way of attaching, instead of using a punch. Of course, I would reinforce the top stitching in that area. I don't own a rivet punch & was thinking of an alternative way to secure the D ring(s). Your videos are the best! Especially sharing helpful comments along the way, like the ¼" seam allowance tip on the Pfaff zipper foot. I had no clue and I have a Pfaff!
@DebbyHunker
6 жыл бұрын
You can certainly try that... I’m not sure if the hardware would get in the way when you try to sew the side seams though... That would be the only issue that I could foresee...
@cleocleo1968
6 жыл бұрын
I'm about to find out and will let you know. Thanks so much for your input!
Debby your videos are awesome! I am ruined, now because I am trying to make the morning glory and I need you to do videos on that one too!!! :)
@DebbyHunker
7 жыл бұрын
I'm so sorry to have ruined you... lol! Thank you for your kind words! My focus is shifting more toward videos and teaching, so hopefully You will sew along with me in the future!
Perfect! Thank you ❤
This is exactly what I was looking for. Thanks!!!
O. M. Goodness. That hack is exactly what I have been looking for! Great video, great instructions. I have just found your videos and am really enjoying them. Your voice is very clear on your lovely introductions but quite muffled when you are up close. Maybe a separate mic...? Not a big problem though.
@DebbyHunker
7 жыл бұрын
I have upgraded to an external audio recorder! My latest little video is much better and you will definitely hear the difference!
Love your tips great video..I really like that you take the time to really explain the process...it builds confidence...Barb
Great hack I love it and think it might work for the Clarissa clutch too!
Thanks, Debbie. This is fabulous.
@DebbyHunker
6 жыл бұрын
Thanks! It works very well on all bags that have the zipper tabs!
This is wonderful, thank you!
Thanks for D-ring hack very helpful.
Wow!!! Thanks for sharing!!!!! B
Wow. Thank you.
I wish I would have seen this before I sewed up my bag lol. I'm going to be doing this next time.
Ok I'm going to ask what some might think is a stupid question for those of us that don't use rivets. Is it in any way possible to incorporate a d-ring into the zipper tab? Even if I were to try sewing in the extra d-ring tab my machine couldn't handle it. Any thoughts?
Great stuff. Keep at it. Love your videos
Now I want one of those presses! I've started doing searches for one lol.
@DebbyHunker
7 жыл бұрын
Summer, first place you should look is Gold Star Tools. Tell them I sent you... David has the press and all the dies you could ever need.
@silverredfern
7 жыл бұрын
wow, you weren't kidding!! So many die sets to choose from. And of course when I opened all my packages of rivets I didn't write down the size of them lol. But this is by far the best deal I've seen for a press!
@DebbyHunker
7 жыл бұрын
Just measure the width of the caps and you're set!
Omg I’m new I can’t wait
@treesy1
5 жыл бұрын
Thankyou this is so helpful.
Thank you Debby!!! What is the make of the hand held press? I love this hack!!!
@DebbyHunker
5 жыл бұрын
It’s the Craftool Pro Punch from Tandy Leather. Best punch I’ve seen...
goog job, I will use it.
I know this was posted a while ago but can you show us how you added the card slots inside the bag? I loved how it looked!
@DebbyHunker
3 жыл бұрын
kzread.info/dash/bejne/omeK1bVqcbC0hMY.html
@jessicamarsh9779
3 жыл бұрын
Debby Hunker Thank you so much! I found it last night and watched. I couldn’t find it for the life of me, that’s when I left my comment. Then it appeared as a suggested video to watch 😆. I appreciate it!
Hi Debby, thank you for sharing your insight on the bag making process with us. Do you happen to know the name/manufacturer of the red/black faux leather that you used on the Clematis bag? I love it and would like to try using it as well. Thank You.
@DebbyHunker
5 жыл бұрын
I don’t know the manufacturer of that vinyl. I purchased it at a local fabric shop a couple of years ago. I wish I had a bolt of it to sell, lol, I’ve had so many requests for it!
Brilliant, thank you so very much! 💚
LOVE this hack. Debby what brand of rivet hole punch are those, and where did u buy them?
@DebbyHunker
5 жыл бұрын
It’s from Tandy Leather and it’s their Craftool Pro Punch.
Awesome hack! Great thank you!
Can you share where you got the swivel clips used on this? I know the video is 5 years ago, but maybe they’re still available?
@DebbyHunker
Жыл бұрын
The Hardware is from Emmaline Bags and yes, they are still available. They have a huge selection of handbag hardware and they ship worldwide!
Love your videos
Perfect timing on someone sharing this hack with us from a FB group! I was about to work on a process to do exactly this. Your idea has saved my sanity. :-) I have a question - how far did you leave from the end of your zipper tabs that were sewn on, to the edge of the raw fabric? I hope that makes sense. It looks like maybe an inch?
@DebbyHunker
5 жыл бұрын
I didn’t change anything from the measurements of the original pattern. I’m not sure if you watched the video tutorial series that I made on construction the Clematis... I hope I’m answering what you’ve asked...
Great tutorial!! What is the name and/or brand of you hole punching pliers?
@DebbyHunker
5 жыл бұрын
They are from Tandy Leather and they are the Craftool Pro Punch
Hi Debby, I appreciate this hack. Do you think it would work with a metal zipper? It is so scary to get to the end of the process and think that you could ruin the whole bag with one rivet. Thanks!
@DebbyHunker
3 жыл бұрын
If you’re removing the extra metal teeth from the seam allowance, then it would work.
Have you posted a video on installing the zipper pull onto the zipper tape?
Love that Idea!!
@DebbyHunker
7 жыл бұрын
Thanks Bev!
Debbie, What a great tutorial! I'm getting ready to make my first Clematis, and plan on using this method for attaching the D-ring. Just watched your hack on the credit cards, plan on using that as well. Can I ask where you purchased the checkered vinyl? Those are my colors and would love to purchase some.
@DebbyHunker
2 жыл бұрын
Thank you for your kind words! I purchased that vinyl several years ago at a local fabric store.
@terriparthum5860
2 жыл бұрын
Debbie, Is your hack on the credit cards that Kathy mentioned for the Clematis? I liked this video 2 weeks ago and am now working on my finishing my first Clematis. I searched everywhere for this hack that I remembered. Finally found it again. whew!!
This is awesome! Thanks for sharing :-)
Hey Debbie, I’m actually hacking an old belt into the sides of a purse just like you did to fashion something to hold a strap, but I don’t have rivets... Could you suggest a way to attach something thick through so many layers without using rivets? Thanks a bunch!
@DebbyHunker
5 жыл бұрын
If you can’t sew through the layers, and you don’t have rivets, the only other option that comes to mind is Chicago screws. They are similar to rivets, but they screw together...
@kiaraczeto
5 жыл бұрын
@@DebbyHunker Thanks! I'll check them out and see how that works!
thanks...great video! what is that marker pen you used? the red one with white marking substance
@DebbyHunker
6 жыл бұрын
It’s a chalk marker. There are little chalk refills that go into the red holder. I think they are available on Amazon. Mine happens to be a Fons & Porter
Beatuful
Thank you so much. You make it look so easy. Where did you get your hole punch? That is exactly what I've been looking for.
@DebbyHunker
5 жыл бұрын
It’s from Tandy Leather... Craftool ProPunch
@peggycooper1221
5 жыл бұрын
Thank you.
hi Debby, love your videos and instructions. Would you tell me what kind of rivet press you use and what dies are most important. I want to order one but not sure which one would be most helpful for doing bags. Thanks
@DebbyHunker
5 жыл бұрын
Hi Sally! Thank you for your kind words! I actually have two rivet presses. One for each studio. In my home studio, I use a KamSnaps DK98, but it’s discontinued. In my Leduc studio, I have a press from PacCana in Calgary Alberta. It’s the same press that Tandy carries, but it’s $145 cheaper. KamSnaps has replaced their DK98 with a DK93 now and as of a couple of weeks ago, I would seriously look into this press... As for dies, I use the die that corresponds with the rivet I’m using... I have rivets with 6mm heads and 8mm heads. I also have press plates that I sell now that fit the Tandy/PacCana presses, the Kam DK93/Minkus Margo presses, and the GoldStar press.
Debbie,thank you for your hacks. I am starting a business and would love to know your opinion on a reasonably priced commercial machine for straight stitching heavy fabrics. I am having trouble getting a nice stitch with either of my home machines. Also, if you wouldn’t mind, what source do you use for hardware? Thank you so much! Nancy
@DebbyHunker
6 жыл бұрын
Where are you located Nancy?
@nancyhunter1637
6 жыл бұрын
Debby Hunker I am in Fort Worth, Texas
@DebbyHunker
6 жыл бұрын
I have 2 machines that I can’t live without... I do 95% of my work with my Juki TL2010Q. It’s a semi-industrial machine, straight stitch only, but it has more power than any domestic I’ve seen. It does have limitations with extreme thicknesses though... Having said that, I’m doing my next series of videos (Snowdrop by Blue Calla) on the Juki, start to finish. The other machine I use, for beautiful top stitching, is my Titan TN650BL. I’m not sure what model it would be in the US... It’s a compound feed industrial and can go through pretty much anything... It does beautiful top stitching and that’s pretty much all I use it for. If you’re looking for a Juki TL2010Q, I have affiliates in the US, email me at debby@doodabug.ca if you would like any more info.
Great hack! Thank you!! Can I ask where you got that wonderful fabric? I've not seen any checked vinyl before.
@DebbyHunker
7 жыл бұрын
I bought it at my local fabric store. I can't even tell you anything about it, sorry...
Love it. 🌹
Hello! Great video! I'm new to bag making. Where can I purchase the rivets, puncher and press? Thank you.
@DebbyHunker
6 жыл бұрын
I’m not sure where you’re located... The punch can be purchased from Tandy Leather, I bought my rivet dies for my press from Tandy as well. I would look for a press locally as they are very heavy and shipping can get costly. I buy nearly all my hardware, including rivets, from Emmalinebags.com
@lushiouslashes9207
6 жыл бұрын
Thank you!
really wanted to know for the NCW wallet what size needle
Hi Debbie, thank you for an amazing tutorial!! I love the D-Ring hack and would like to know the size of zipper tape you use. I am ordering a rivet press and I understand that you are using the 9mm for this bag. I have cut several of these bags and will be doing them assembly line style and your video has helped me to understand the process better. BTW on your first video of the Clematis, you have your pattern taped together with a space in the center, is there a reason for that? Regards, and please keep the tutorials coming.
@DebbyHunker
7 жыл бұрын
Hello Jean! Thank you for your kind comments! I use #5 zipper tape, and in this video, I used #5 plastic tooth zipper (as opposed to #5 coil). Because of the thickness of all the layers, yes, I used medium (9mm) rivets. I have small (8mm) and medium in my hardware stash. That little space in the pattern piece is just to make it easier to fold and store. It's the same size as the original pattern piece.
@jeanriley6380
7 жыл бұрын
Thank you for the quick reply. Have the best day and really, keep the tutorials coming.
@furrypaws
6 жыл бұрын
Hi Debby, could you tell me the height of the stem of the rivets used pls?
@cinderelli3192
4 жыл бұрын
@@DebbyHunker you always seem to add so much flair to your bags especially by adding the #5 plastic tooth zipper, I'm finding it hard to find an 8" plastic tooth zipper though, did you cut the one you used to fit the bag and then add the zipper tabs? Did you sew the tabs over the zipper teeth to add the tabs ? Sorry for all the questions LOL
Debby, just came upon your hack. Could I do this on a pouch that is already made?
@DebbyHunker
3 жыл бұрын
If it has zipper tabs, there shouldn’t be any reason not to... I don't do anything different structurally.
@jolynnbrummer5382
3 жыл бұрын
Tried this, but unfortunately it didn't work. My leather hole punch couldn't reach in far enough to punch the hole!
Hi Debby, if i were doing this in fabric, how wide would i cut the little tab bits?
@DebbyHunker
6 жыл бұрын
Hi! I would cut my fabric 2” wide, and then fold to the centre and fold again so that you end up with a piece that’s 1/2” wide.
@dianeduncan5814
6 жыл бұрын
Thanks again hun :)
Hi Debbie love your tutorials... what do you use as a lining in this Clematis
@DebbyHunker
6 жыл бұрын
In this particular Clematis, I used a nylon, outwear fabric. It worked ok, but it was very hard to fuse the stabilizer to it because of the waterproof qualities of the nylon.
Great Video, would it be possible to sew then in on the tab instead of using rivets .
@DebbyHunker
7 жыл бұрын
I suppose it is possible... You would be sewing through a lot of layers and your rings would be facing the centre of the bag instead of toward the outside.
Hi Debby... what would you say is the better zipper for me to purchase for the clematis bag? I know nothing about purchasing them... this is all new to me. Type, length, width? Thanks
@DebbyHunker
7 жыл бұрын
I prefer #5 zippers for handbags in general. They have a little more substance and don't look like dress zippers (#3). If you aren't going to use zipper tape (my preference), then 8" zippers work. The one I used in this video is #5 plastic tooth, but I use #5 coil zippers too. You have to be extra careful when sewing over the plastic tooth zippers though because you'll break needles if you hit a tooth. Coil zippers are less hazardous...
@cinderelli3192
4 жыл бұрын
@@DebbyHunker thank you Debby, I now see that you answered my question in this other comment you provided to Arlene. I will try and cut the zipper down and be cautious when adding the tabs ..... Love you video and I keep forgetting to thank you for introducing Emmaline Bags for bag hardware, I live in Barrie, Ontario and she shipping costs are very reasonable, not to mention that I LOVE her products.
Debbie I am new to the Clematis and would you mind sharing where you get your bag hardware?
@DebbyHunker
7 жыл бұрын
Not at all! Emmalinebags.com
quick question, can I install them before sewing it closed? Have you tried it that way? I don't have the press yet and Having to hammer the rivets may not work so well once it's closed up.
@DebbyHunker
7 жыл бұрын
I think you will find it very difficult to sew with the metal pieces installed... I'll send you picture of how I think you'll be able to do it, with a hammer and setting tools, through my FB group.
@silverredfern
7 жыл бұрын
Debby Hunker thank you!
@DebbyHunker
7 жыл бұрын
Summer, are you in my FB group? I'm trying to tag you, but your name isn't coming up...
@silverredfern
7 жыл бұрын
I thought I was, maybe not! What is it and I'll join. :-)
@silverredfern
7 жыл бұрын
joined
what size of needle do you use in the sewing machine thank you
@DebbyHunker
6 жыл бұрын
I use a 100/16 Topstitch needle exclusively in my sewing machines when I’m bag making.
Debbie, what size rivets do you use for this?
@DebbyHunker
7 жыл бұрын
I used medium rivets.
@ginishevrin6469
7 жыл бұрын
Thanks.
It's there a pattern for that bag?
Pattern ?
Any pattern ?
@DebbyHunker
2 жыл бұрын
It’s a free pattern by Blue Calla Patterns
@synwannleathercraft8506
2 жыл бұрын
@@DebbyHunker were is the pattern