Thanks for the video. I got one of these after dad died and need to clean it up to use it.

@2ndChanceTackle

3 жыл бұрын

You are welcome. Once cleaned up, the reel will last and last. It is well made and durable - Best wishes - Dennis

Great tutorial ! I had it going on stop & go mode and it allowed for maintenance that went like a breeze. Thanks again Dennis !

@2ndChanceTackle

3 жыл бұрын

Glad it helped! Thanks for watching - Best wishes - Dennis

Great video, I just scored a free Ryobi 805 which is jammed and I'll follow these steps.

@2ndChanceTackle

3 жыл бұрын

The Ryobi reels are nice, solid and dependable. The only downside is parts availability, so keep it serviced and keep it fishing - Best wishes - Dennis

@johnroberts7924

3 жыл бұрын

@@2ndChanceTackle Thanks Dennis

Thanks so much for your reply.

Great video. It was extremely informative with not only info about how the reel works but the back history too. I recently got a Ryobi reel given to me. It’s a Ryobi TNT 200 BALL BEARING Graphite Spool with a Touchn’ Trip bail release. Well the Touchn’ Trip is not working. I’ve been trying to find some literature as well as videos to help me understand it so that I’m able to fix it. If u have any kind of words of wisdom to help out I would extremely thankful. Either way thanks for ur time

@2ndChanceTackle

Жыл бұрын

Glad you enjoyed it! Those trip switches are finicky and once they go, the only solution is a replacement part, which will be difficult if not impossible to find. Thanks for the note - Dennis

@sonyacisneros7015

Жыл бұрын

@@2ndChanceTackle Thanks for the info.

I bought one today at the local outdoor flea market 10.00 on a medium catfishing rod got it cheap because the line was tangled...

@2ndChanceTackle

4 жыл бұрын

Sounds like a great deal. Time to tune it up and take it fishing - Thanks for watching - Dennis

Thanks so much for making this vid! My friend gifted me a nice salmon pole with this reel so I'm excited to reference this video when it needs a little TLC. Luckily it seems to be in good shape, name plate still attached. Probably needs new line though, but a part of me is considering testing my luck with it once I get my fishing license. Were you able to take this out and test it? How did it go? 🎣 Thanks!

@2ndChanceTackle

4 жыл бұрын

I like these reels and take them fishing. The line is cheap. Don't you dare go with the old stuff on it. I'm sure the memory in the line and the age will make you think the reel is bad. Get a fresh spool just in case you hook into a big one. No sense talking about the one that got away because you didn't change the line - Best wishes - Dennis

@Deloria

4 жыл бұрын

@@2ndChanceTackle Haha okay Dennis you convinced me! Fresh line it is. Thanks again!

found your videos today and they really helpful. you dont use an ultrasonic cleaner to clean parts at all??

@2ndChanceTackle

5 жыл бұрын

I do not use the ultrasonic cleaner. I don't have that much need as I do not have a large enough volume to make it affordable. I know others that use them and really like the results. - Thank you - Dennis

Dennis,just picked up a Ryobi Project 8000 GT which is going to need an overhaul. Have you done or are you planning any tutorials on this particular reel please? Stay safe and best wishes from England Stuart

@2ndChanceTackle

4 жыл бұрын

I don't have one of these. Ryobi stopped selling reels in the US in the 1990s when they sold their US business to Berkley, which was then acquired by Pure Fishing. As a result, I cannot do a video on it. Thanks for asking - Dennis

@stuartwebster829

4 жыл бұрын

Dennis,not to worry. I will take plenty of pictures and go steady when I do a service. Keep up the good work,really enjoy your style and thanks for sharing your knowledge. Best wishes Stuart

This is a great video, thank you very much. I have a Ryobi MX 10 reel, would you happen to know what year that reel was produced?

@2ndChanceTackle

2 жыл бұрын

It was before 1990 when Ryobi exited the US market by selling their product line to Berkley. So - somewhere between their early 1970s reels and then. Probably the 1980s

@dolam

2 жыл бұрын

@@2ndChanceTackle awesome, thank you very much.

Hello i repair and collection reel vintage 50’ 60’ 70’ whit body alloy and magnésium only i have reels daiwa shimano ryobi roddy diamond olympic made in japan and Mitchell 302, 303, 402 and 403 only made in france , good job bests regards, David to france

@2ndChanceTackle

4 жыл бұрын

Thank you and thanks for watching - Dennis

Hi Dennis, I have a Penn Sargus 3000 spinning reel. The line roller does not rotate all the way down to the bottom of the spool. The result is that my line goes on unevenly. There is more line at the top of spool than the bottom. I have opened it up, but everything looks fine. I am stuck. Any suggestions even though you haven't looked at reel?

@2ndChanceTackle

5 жыл бұрын

Yes - my first thought is that it could be one of two problems. The bail wire may be bent where it rides higher that it should. That would change the elevation of the line wrap moving it higher up the spool. If that is the case. use gentle pressure to push down on the bail wire to realign it. In the end, the bail wire may need to be replaced. The second is less common. There is a white shim washer that sits on the spool shaft on top of the click rotor. If it is not there, perhaps it was broken and fell off, then the spool would sit lower and cause the line to ride high. Get the schematic for the reel at Mysticparts.com. The washer is #60 on the diagram. Follow the site link under Penn Parts to spinning reels and select Sargus, -

@CJ77771

5 жыл бұрын

OMG Dennis, your a genius. Without even looking at my reel you knew what was wrong with. I unscrewed the spool and sure enough, it be was missing part #60 the washer. You are part of a dying art. You don't know how many reels I have had to replace because of California "repair men" in my area not knowing what they are doing. I wish you the best of health and I hope you have an apprentice, someone you can pass you knowledge to. Tight lines.

I have the Ryobi sx5m silver cloud but it is green. have you ever seen a Green silver cloud?

@2ndChanceTackle

5 жыл бұрын

I have not seen this in green. You may want to research it further. - Dennis

@senecadaze

5 жыл бұрын

@@2ndChanceTackle thanks

Didn't install bracket with two screws that holds the bearing in place under rotor.

@2ndChanceTackle

Жыл бұрын

Hmmm - I will need to go back and check - thanks - Dennis

@6thmichcav262

Ай бұрын

No, he never took it off.

did you ever try brake cleaner on greasy gears

@2ndChanceTackle

4 жыл бұрын

I have not tied it. I am somewhat leery of aerosol cleansers and inhaling the mist. I hear it works well, just take precautions if you use it extensively - Dennis

I have a fluter sea star 1050 Akron Ohio Perfect condition but I need the cross block slide would you be willing The sell me that real or the part

@2ndChanceTackle

Жыл бұрын

I need to see if I still have that reel. I do not stock parts, so it would be a donor reel if I have one - Please send a note to my email 2ndchancetackle@gmail.com to remind me - Thanks you - Dennis

Hi I’m a new subscriber and am getting into halibut/ling cod/rock fish fishing. I am hoping to work on a charter boat on the coast of Vancouver and I’m looking for a penn 49 left hand reel. If you have any that you would be willing to sell or know anyone that will sell I’m interested in buying. Thank you.

@2ndChanceTackle

5 жыл бұрын

I will check. I do not have the lefty in the 49. I believe I may have a 4/0 lefty Penn Senator if you are interested - Dennis

@xaviercheryba870

5 жыл бұрын

2nd Chance Tackle thanks but I think I’ll keep looking. I looked at a senator and I wanted something skinnier so it didn’t wobble while reeling up from the deep I’m fishing from 50-150 feet of water give or take. Thank you very much for the reply though

@2ndChanceTackle

5 жыл бұрын

Sure thing - Just offering an alternative - Dennis