Classic Mini | 1380cc Engine Build | Jeffries Performance | **FAST ROAD** | S1 - EP 2
Classic Mini | 1380cc Engine Build | Jeffries Performance | *FAST ROAD* | S1 - EP 2
In this episode I pay a visit to Jeffries Performance down in Solihull, Paul allows me to film the process of my engine being built, the engine is a 1380cc with some nice bits of kit added to it. Follow the series to find out more.
Lukes Go Fund Me
uk.gofundme.com/f/help-luke-r...
Follow My Instagram @tomshorrock
Follow Pauls Instagram @Paul_Jeffries
Pauls Channel :- / @pauljeffries
Join TCR FORUM? : www.totalcarreviews.com/forum
TCR SHOP : www.totalcarreviews.com/shop
Classic Mini Restoration
Business Enquiries:- Tom@totalcarreviews.com
Things I Use:
MAIN CAMERA - amzn.to/2OGIbbl
Audio - amzn.to/2Amb97F
Cameras For Tight Spaces - amzn.to/2JatR5c
My Snow Foam Bottle - amzn.to/2yVz6kj
The Best Tyre Shine - amzn.to/2AmRswz
Пікірлер: 90
Follow me on Instagram @TomShorrock for early previews of the next episode🤘🏻
Nice to see Paul doing he's stuff, that's going to be a sweet engine, the car looks amazing Tom, let's hope the fund page does well,
@TomShorrock
3 жыл бұрын
Cheers dude! Me too!
Hi From New Zealand Another top video from you, as always. Noticed no centre strap, but then again this guy knows his stuff....
@pauljeffries
3 жыл бұрын
Hi gavin, there's no need for a centre main strap on this particular build as the engine won't be revving much over 6000rpm 👍
@TomShorrock
3 жыл бұрын
Hey Gavin, Thanks as always, KZread has just informed me you have been subscribed for over 4 years! thanks a bunch dude!
Good to see you back Tom been missing the clubman estate. I watched all of the Luke’s Mini series, there was a heck of a lot wrong with it, and as they say you can’t make a silk purse out of a sows ear. It’s a disappointing outcome for both Will and Luke. I think I mentioned there, that I’ve just spent 16 grand and three years on my Mini and it’s not a patch on yours or Toonys but it’s fine for me. It takes a lot of brass to get a mini where you want it. Will worked hard and did his best, and comes across as a nice guy. He says himself he’s learning all the time. Take Care Stay Safe Everyone Regards Dave 👍😎🏴 Keep those masks on a while longer
@TomShorrock
Жыл бұрын
Cheers dude!
I will be putting an 1.0 eco Boost in my 1989 racing green mini. it’s the way to go now days and I’m not having it done at z cars I will be attempt it my self I cannot wait to start this project in winter ready for next spring or summer 👍
@TomShorrock
3 жыл бұрын
This sounds quick dude!
@markellis4229
3 жыл бұрын
@@TomShorrock Yes it will and it will run better on e10 fuel so I’m not stuck finding a fuel station what stock e5 fuel when I’m out of my own Town. And it’s more the way to go for me. it’s gets good Power and good fuel economy I will keep my mg metro 1275 engine if i want to reinstall it in the future.
Love the videos tom, found them so useful while restoring my mini 998cc
@TomShorrock
3 жыл бұрын
Thanks Chris, glad to have helped
amazing video as ever mate and cant wait for the next video
@TomShorrock
3 жыл бұрын
Cheers dude! Had no idea you still watched
@drasticg
3 жыл бұрын
@@TomShorrock yes mate, when ever i get notified i watch your vids, not been on KZread much coz ive been busy moving house etc
@TomShorrock
3 жыл бұрын
Cheers dude! Hope the move went well! I’ve not uploaded in 2 months 😬
It's going to be a completely different beast with a 1380 underneath it and at least you know with Paul Jeffries building it you're guaranteed a great reliable engine, I'm well aware of how highly he's thought of in the Mini community. Are the brakes and suspenion up to it or are they going for the renew treatment too?
@TomShorrock
3 жыл бұрын
Brakes will happen further down the line dude! Need to sort the house first haha
@graemew7001
3 жыл бұрын
@@TomShorrock That's life mate, too many projects, not enough hours to do them all!!
Great video, the shots of Paul working were great
@TomShorrock
3 жыл бұрын
Cheers bud! We need to start the podcast 😉
@thedjse
3 жыл бұрын
@@TomShorrock 1000000000%
@classicminidetails8887
3 жыл бұрын
@@TomShorrock that the podcast that's been in the making for 3 years
great show
Nice vid bud, glad you’re back. Shame about Luke’s car, feel a bit sorry for the pair of them cos it’s easy to see Will puts his heart & soul into his work, but is limited with space and access, and Luke must have been expecting so much better after 6 months. Hopefully this hasn’t ruined any relationships🤞. Good luck with the project 👍
@TomShorrock
3 жыл бұрын
Cheers dude! It’s a tough one, but like I say if it was wills car that needed sorting I’d be helping him aswel 🤘🏻
@tonywood6332
2 жыл бұрын
@@TomShorrock hi mate, potentially buying a van with a 1380, wondered what your thoughts on the 1380 are ?
You can't go wrong with a 1380cc Great video as always👍👌
@TomShorrock
3 жыл бұрын
Cheers dude!
I took my mini to Chester mini center years ago and they ripped me off with oversills and second hand parts dodgy repaired floor for 2k and didn’t even change my clutch when they had the engine out. The clutch went three months later and they charged me another 400 to fix it.
@TomShorrock
Жыл бұрын
yeh oversills are the worst dude!
Brilliant !!! Less is More.. Excited for you!!
@TomShorrock
3 жыл бұрын
Haha! Cheers Randy!
@LoneStarMini
3 жыл бұрын
@@TomShorrock silly me.. by saying “less is more”, I was referring to a one word response “brilliant “…. Simple thrilled for tou
@TomShorrock
3 жыл бұрын
Cheers dude 🤘🏻🔥
Nice video! Shame about luke's car, I did watch wills videos and most of the repairs did look a bit dodgy and bodged. But Will was trying to help a friend out but sometimes it's worth waiting and getting the right person to do the job properly
@TomShorrock
3 жыл бұрын
Yeh I don’t doubt he was trying to help a mate out, if it was wills car that needed tapirs I’d be doing the same with a go fund me for him
Got to love a 1380 that roof looks mint 👌
@TomShorrock
3 жыл бұрын
Cheers dude! I’m well chuffed with it
Very nice engine spec! What sort of carb & dizzy setup are you going for? I'm not far off fitting a new 1330 into my Mk1 with not too dissimilar specs from yours with the same compression ratio and similar parts being used, but it's a pre-A+ with a Swiftune SW8 cam, and 1.5 rockers sat on a 1275gt gearbox with straight cut drops and 3.44 diff. Hoping to get between 90-100hp ideally with twin HS4 carbs, so I reckon yours should be good for 90+ once it's run in and set up right with a good carb(s) setup and distributor!
@TomShorrock
Жыл бұрын
cheers dude! that sounds awesome!
Looks great Tom.
@TomShorrock
3 жыл бұрын
Cheers dude
Great video as always Tom
@TomShorrock
3 жыл бұрын
Cheers dude
Nice to see another good video, its been a while, hows the cottage coming along pal?
@TomShorrock
3 жыл бұрын
Cheers dude! And not bad we’ve been allowed back now for a couple of months so that’s where all my time has been going haha
I am building a 1310 to swap out my 998. Someone sent me the link to your engine swap video and I thought I'd have a look back through these. I noticed this engine has a Simplex rather than a Duplex Chain with a Chain Tensioner? You mention in the video a Vernier Setup, this must have been installed later?
@TomShorrock
3 жыл бұрын
Hi Bill, your engine sounds lovely, in response to your question we changed it afterwards, the vernier one hadn’t arrived in tike for the day the episode was filmed,🤘🏻
@Sternhammer89
3 жыл бұрын
@@TomShorrock I too went with an AC Cam, but the next one down the AC RS, a little more driveable. MED ST1 Clutch and Flywheel. Always doing things the hard way me, such as spotting and buying a Weber DCOE 45 and buying it. Now I need to cut the bulkhead, which could throw up all sorts of extra problems!! Oh, doing the head myself, this car has been an episode of first!!
Thanks for sharing 👍
@TomShorrock
3 жыл бұрын
My pleasure! 🔥
Cracking engine, great content TCR ....crazy you've only fitted a simplex chain though to that 1380 initially. At a minimum I'd have fitted a duplex. a Vernier is even better. 👌🤣
@TomShorrock
3 жыл бұрын
I have fitted a vernia, I mentioned it further on in the video, and cheers 🤘🏻
@OnlineHousehusband
3 жыл бұрын
@@TomShorrock yeah good choice there. 👍 Do you have any contact details for Paul? Can't find anything anywhere online.
@pauljeffries
3 жыл бұрын
@@OnlineHousehusband hi, you can contact me at pauljeffries20@yahoo.co.uk my website is currently having a revamp.
@TomShorrock
3 жыл бұрын
@paul Jeffries on Instagram “ classic mini garage on KZread
Hi Tom Nice work, has Jeffries got a website or social media page? Looking to tune up my mini 👍🏻
@TomShorrock
3 жыл бұрын
@paul_jeffries on Instagram “classic mini garage on KZread
@TomShorrock I am currently also rebuilding my own mini and need to choose which color i'm gonna repaint it. So i was wondering what color red you used on your mini.
@TomShorrock
3 жыл бұрын
Hi Vic, it’s Tartan Red the Ral I used was RD33
Looking forward to the next few videos Tom. What wheels and arches have you got on your mini?
@TomShorrock
3 жыл бұрын
Cheers dude! And they are group 6 arches with 7x13 alley cat wheels
Been a while Tom, dont do instagram so its been even longer, nice vid cant wait for next one, was also following the cottage i'm guessing thats eating time and money?
@TomShorrock
3 жыл бұрын
Hi dean, cheers! It certainly has! I’m hoping to have an update on the other channel very soon
Just watched Luke's mini on other shame that was outcome, William seems like a nice chap
@TomShorrock
3 жыл бұрын
Will is a sound guy, I just think maybe he took too much on, I don’t doubt his best interest at heart was to help, and if it was Wills mini I’d be doing the same for him with the go fund me etc 🤘🏻
@markellis4229
3 жыл бұрын
@@TomShorrock 👍 Nicely said He tried his best and his heart is in the right place. and some people should keep there nose out other peoples Business. it’s between Luke and will to sort it out. And from what Iv seen will is to nice for his own good. i wish someone like Will was always there to help me in my hour need when iv got problems with my classic mini.
What is Paul website.
@MiniMattTV
3 жыл бұрын
Paul goes by JPE on social media I believe
@pauljeffries
3 жыл бұрын
I have a KZread channel as well.......classic mini garage
@TomShorrock
Жыл бұрын
see above
o yessss
@TomShorrock
3 жыл бұрын
Oooo yessss
What are the specs of that cam.
@TomShorrock
Жыл бұрын
AC DODD RS PLUS Episode 1 details everything that I used
1380 gang.
@TomShorrock
3 жыл бұрын
Warp!!!!
👍👍👍👌
i carnt believe you have named and shamed william murfit , wtf
@TomShorrock
3 жыл бұрын
No names were mentioned….
@waynedavies2573
3 жыл бұрын
@@TomShorrock no they wasnt just a photom of car hes been working on trying his best with for last 4 month or so , who needs enemy's, eh,
@TomShorrock
3 жыл бұрын
@@waynedavies2573 like I’ve said, his heart was in the right place, and so is mine, if wills car needed sorting I’d be doing a go fund me for him
@waynedavies2573
3 жыл бұрын
@@TomShorrock only as good as your last job job remember that tom
@TomShorrock
3 жыл бұрын
@@waynedavies2573 not slating him at all dude, like I said I do the same if it was the other way round, it’s not just me that’s mentioned it either, it was a difficult decision to make, but there’s a lot that’s happened that viewers aren’t aware of
Loved seeing mr Jeffries at work, lovely engine spec, I look forward to seeing and hearing it 👌🏻
@TomShorrock
3 жыл бұрын
Cheers Matt! I can’t wait!