unboxing a full set of floor pans for my 1980 jeep wagoneer from classic 2 current
Жүктеу.....
Пікірлер: 19
@justrobocon65383 жыл бұрын
I bought one extra rear pan to use as an exact metal match to stitch in the missing middle piece....much like you have missing. Worked wonderful for me....HTH CHEAP N EASY.
@Hellguy761313 жыл бұрын
I wasn’t super happy with my floorpans from C2C but they worked ok. The center section will need some 16gauge since it’s under the seats but those patches are simple enough to make. If you make the patches be sure to include the punch seam. It’ll make for a better finished product.
@rustyjeep24693 жыл бұрын
Hey man, you can't have the logo as your avatar on KZread, I already picked it first. We're gonna have to talk about that Razor grill image on your profile too... jk jk. I went with the BJ's floorpans for my '69 and they're nice quality but not an exact drop in fit for that year. I'll have to do some massaging and adjusting where they meet up to the transmission tunnel. They don't have a missing section between the front and rear pieces though.
@bryan350sb
3 жыл бұрын
I'm wishing I had just waited and bought the complete pans, but it won't be too bad to patch the centers
@King33joe2 жыл бұрын
Hey can you do a video update to see where you are on the project? Thanks
@Chris1986h2 жыл бұрын
New subcriber here, just wanted to say I love the content so far. Ive got a 76 I just gutted and ready to do floor pans. Will you be doing the replacement anytime soon?
@bryan350sb
2 жыл бұрын
Probably not until after the holidays. I work full time now and haven't had time to get back to it.
@angelgalindo56352 жыл бұрын
Please Shane more advancing
@bryan350sb
2 жыл бұрын
I will post more when I have time to work on it. Don't worry, I haven't stopped making videos. I just have a very demanding job.
@patrickoxenham46932 жыл бұрын
Hey, so I have a stupid favor to ask, my wipers on my 88 shake when in use and I’ve been told I need to adjust the wiper linkage. I can’t find anything showing me how. Since you use your dash out could you do a quick tutorial on it?
@bryan350sb
2 жыл бұрын
I'll see what I can do.
@patrickoxenham4693
2 жыл бұрын
You would be a saint. I know it’s not difficult but my dash is intact and my fat ass struggles to connect where I need to adjust or tighten to prevent them from shaking.
@MrMatthewGallagher2 жыл бұрын
Hey man, you mentioned BJ off-road offers full floor pans. Do you have a link to this? I can’t find anything
@bryan350sb
2 жыл бұрын
It was a couple years ago. I just checked their site and didn't see it either.
@themaverickmechanic72402 жыл бұрын
So how’s it coming along?
@bryan350sb
2 жыл бұрын
I'd love to say well, but I haven't had any time to work on it.
@BadHorsie22 жыл бұрын
You still working on this.
@bryan350sb
2 жыл бұрын
It's still in the garage. I just haven't had time. I'm working again and my schedule doesn't really give me much time to work on my own stuff. I work for Fox Factory, building off road vehicles for everyone else all day and I don't want to touch my own projects when I get home. 🙃
Пікірлер: 19
I bought one extra rear pan to use as an exact metal match to stitch in the missing middle piece....much like you have missing. Worked wonderful for me....HTH CHEAP N EASY.
I wasn’t super happy with my floorpans from C2C but they worked ok. The center section will need some 16gauge since it’s under the seats but those patches are simple enough to make. If you make the patches be sure to include the punch seam. It’ll make for a better finished product.
Hey man, you can't have the logo as your avatar on KZread, I already picked it first. We're gonna have to talk about that Razor grill image on your profile too... jk jk. I went with the BJ's floorpans for my '69 and they're nice quality but not an exact drop in fit for that year. I'll have to do some massaging and adjusting where they meet up to the transmission tunnel. They don't have a missing section between the front and rear pieces though.
@bryan350sb
3 жыл бұрын
I'm wishing I had just waited and bought the complete pans, but it won't be too bad to patch the centers
Hey can you do a video update to see where you are on the project? Thanks
New subcriber here, just wanted to say I love the content so far. Ive got a 76 I just gutted and ready to do floor pans. Will you be doing the replacement anytime soon?
@bryan350sb
2 жыл бұрын
Probably not until after the holidays. I work full time now and haven't had time to get back to it.
Please Shane more advancing
@bryan350sb
2 жыл бұрын
I will post more when I have time to work on it. Don't worry, I haven't stopped making videos. I just have a very demanding job.
Hey, so I have a stupid favor to ask, my wipers on my 88 shake when in use and I’ve been told I need to adjust the wiper linkage. I can’t find anything showing me how. Since you use your dash out could you do a quick tutorial on it?
@bryan350sb
2 жыл бұрын
I'll see what I can do.
@patrickoxenham4693
2 жыл бұрын
You would be a saint. I know it’s not difficult but my dash is intact and my fat ass struggles to connect where I need to adjust or tighten to prevent them from shaking.
Hey man, you mentioned BJ off-road offers full floor pans. Do you have a link to this? I can’t find anything
@bryan350sb
2 жыл бұрын
It was a couple years ago. I just checked their site and didn't see it either.
So how’s it coming along?
@bryan350sb
2 жыл бұрын
I'd love to say well, but I haven't had any time to work on it.
You still working on this.
@bryan350sb
2 жыл бұрын
It's still in the garage. I just haven't had time. I'm working again and my schedule doesn't really give me much time to work on my own stuff. I work for Fox Factory, building off road vehicles for everyone else all day and I don't want to touch my own projects when I get home. 🙃