Very useful information., for those who want to delete the particulate filter on PSA vehicles.

@YOYODiagnostic

Жыл бұрын

Or for those who want to install it after deactivating it and having problems with gas emission at technical inspection. In the case of this car, a new particulate filter was fitted and a new pump fitted. A video will follow in which I will show you how to program it, after the tank and pump have been changed. Thanks for watching 👍

@waldemarfechtel1644

Жыл бұрын

We like to see the video how you teach in the new parts after change it

@YOYODiagnostic

Жыл бұрын

@@waldemarfechtel1644 Hello, this or next week I will post that video. 👍

@tazsiddique958

3 ай бұрын

What diagnostic are you using

Thanks this information has solved a problem i had after Adblue delete in the ECU i had a remaining issue with the dash board showing milage countdown on the display Bravo many thanks YOYO

@YOYODiagnostic

2 ай бұрын

You are welcome 👍

Great job 👍

@YOYODiagnostic

Жыл бұрын

👍

Dankeschön Dankeschön Dankeschön. Bitte immer noch solche Videos machen. Lg

@YOYODiagnostic

Жыл бұрын

Thanks for watching and subscribe 😊. Dankeschön 😊

Thanks for the info

@YOYODiagnostic

Жыл бұрын

👍

Good stuff!

@YOYODiagnostic

8 ай бұрын

👍

Good instruction

@YOYODiagnostic

Жыл бұрын

👍

Do you have to put the fuse back when you’re done with the process?

What is diagnostic tool you use we have Xtools but could not configure

Dear Sir, I don't know if I understood you, this function serves and enables, if you have a problem with Aditive, for example, the lamp turns on, or you can drive a few more kilometers, this option is, in other words, to turn off aditive. off.

@YOYODiagnostic

Жыл бұрын

Hello, yes, you can deactivate this pump and drive, but it is not recommended. if you want to do the job properly, turn the DPF off. You have two variants either with DPF or without DPF. 😉

I followed this through step by step but the Berlingo is still staying in limp mode and throwing MULTIPLEXED ADDITIVE FAULT (P1434, P0460,P1435)? Ive ABSENT both FAP and ADDITIVE PUMP and thoughts?

@YOYODiagnostic

5 ай бұрын

Send me a dump from your ECU. Make a reading of the ECU

Hi, does it take the car out of limp mode? I need it temprorary as I can't fix it right now

@TheDajoca

5 ай бұрын

Topdon Artidiag800BT will clear the faults and if you choose to reinitialise the faulty parts - Adblue, NOX, or Eolys, it will also remove the countdown / limp mode. You SHOULD also be able to do it with the Thinkdiag and the Topscan. Artidiag requires no subscription, but the Thinkdiag and Topscan do. The Topscan is the cheapest. You can probably also do it with the Foxwell 510, 530 and 710.

Hi yoyo i am looking for a cheep option to uncode the adble as in thid video i tried with x431 Launch but the chinese have taken out the coding options so it cant work without paying for an online session in the uk from a launch agent and they will not do this coding only after fitting new parts so i am screwed please can you suggest anything best wishes Jm,

@YOYODiagnostic

Ай бұрын

Hi, Go for Autel.

Hi there Which machine Is this the launch error 2 Have you got a link where you brought this machine from and very good job

@YOYODiagnostic

Жыл бұрын

See the last video 😅

I don't really understand this and I tried it multiple times on different PSA cars. For example, if PAT fluid tank/pump is at fault, you get errors like P1434 P1435. If you perform this procedure, these faults are still present in engine ECU, so the only way to really get rid of PAT/Eolys system is by remapping / DTC delete from engine ECU. So what is the point of this procedure? Thanks.

@002o

10 ай бұрын

P1434 P1435 appear with an empty additive tank. Fill the tank and write it into diagnostic, either filling tank procedure or replacing the whole tank procedure.

@jcerna111

10 ай бұрын

@@002o Not the point here. We are trying to delete the system, not repair it.

Hi, is it same for Ford Fucus mk2 GEM module?

@YOYODiagnostic

Жыл бұрын

If the car has the engine borrowed from Peugeot (PSA), then it will have the same configuration.

The additive tank on peugeot 3008 was disabled but now my DPF keeps clogging. Right now it is blocked. I have had it cleaned but the engine management light came back on. The error is showin that my DPF is blocked again.

@YOYODiagnostic

Жыл бұрын

When the additive pump is deactivated, it is recommended to cancel the DPF. Without additive the regeneration temperature is not reached. You either fix the problem or cancel it completely.

@chandamulenga9703

Жыл бұрын

@@YOYODiagnostic won't that be an issue with MOT if you cancel the DPF.

@YOYODiagnostic

Жыл бұрын

@@chandamulenga9703 Canceling the DPF is not recommended also smoking or taking drugs is not recommended and yet people do it. It is everyone's decision and choice to do what they want. What is completely illegal and punishable by imprisonment in some countries is the manipulation of Mileage.

@002o

10 ай бұрын

@@YOYODiagnostic Smoking and drugs damage only you yourself. Removing DPF you damage other people by spreading microparticles right into their lungs. Modern Diesels without DPFs spread cancerous microparticles, that is the fact. Do some research before posting such videos. (And no, planes, ships or burning oil reservoirs in Ukraine does not produce the microparticles as modern high pressure turbodiesels do. And usually do not drive in towns, near foot-paths and uder peoples windows).

Thanks for video, will lexia do this job also?

@YOYODiagnostic

Жыл бұрын

Hello, Yes Lexia can do also this job. Next time I make a video with Lexia! 👍

@milosblagojevic1196

Жыл бұрын

Thanks good man

@Paulkingdom04

Ай бұрын

@@YOYODiagnosticwill Zeus work?

Wo gibt's kaufen pro diag? Gruß

@YOYODiagnostic

Жыл бұрын

Original is Launch

Once I reset the lights with a computer the lights go off and then when I put the diesel in (refill the car) the light go back on. I have a Citroen spacetourer 2018

@YOYODiagnostic

Жыл бұрын

you want to say that you fill up and go 1000 km, nothing appears. When you fill up does the error appear?

@YOYODiagnostic

Жыл бұрын

@@ranjitsingh1200 It has no logic. What does diesel have to do with AdBlue. I ask you one more time, if you fill up the tank and delete that error, it doesn't appear until you fill up again.? Send the picture by email, I usually respond in a few days.

@ranjitsingh1200

Жыл бұрын

@@YOYODiagnostic I agree although I am talking about diesel additive pump not adblue

@user-st5jz2ew4t

Жыл бұрын

​@@ranjitsingh1200 I think I have the same problem as you, have you managed to fixed it?

@werner.x

Жыл бұрын

@@ranjitsingh1200 I think, your problem could be, that you delete the detected trouble code only. But you delete just the dtc without fixing anything. So, as soon as you fill the tank next time, the ecu tries to add eolys again, detects a malfunction once more and set your trouble code again. Endless game, unless you fix the problem or delete the eolys system as a whole, as mentioned in the video. Which should be done temporarily only, because you're not street legal then.

Hello, I have a request, how can I activate the FAB DPF pump.? I have AUTEL diagnostics. I already bought the car Peugeot Expert, year 2017, error B1811 96. THANK YOU.