Circumscribe a regular Hexagon around a Circle (Simple and easy method)
This video provides a very easy way to circumscribe a regular hexagon around a circle of any given radius. This geometrical construction will be very helpful in drawing hexagonal nut and bolt drawings. Hexagonal shape is used in many engineering applications such as buildings, beams, bars etc.
Engineering Drawing I Geometrical Drawing
Пікірлер: 73
Very beautifully explained. I have also tried to explain it miraculously
Thanks ,,it was super easy and helpful....
Thanks a lot for making this tutorial.
@1styearengineeringdrawing182
2 жыл бұрын
👍 Please share with friends.
Tnx sir so much all doubt clear
thank you so much it's really helpful
@1styearengineeringdrawing182
2 жыл бұрын
👍
Спасибо что показали как рисовать, все получилось идеально!!!
@1styearengineeringdrawing182
Жыл бұрын
Спасибо за Вашу поддержку
Thankyou very much sir
Thankyou sir this video is really helpful
@1styearengineeringdrawing182
Жыл бұрын
👍
Thank you sir
Thank you so much 🙂
@1styearengineeringdrawing182
2 жыл бұрын
👍
Thank you really helpful
@1styearengineeringdrawing182
2 жыл бұрын
👍
Sir ur teching is super upload more video sir pls sir
@1styearengineeringdrawing182
2 жыл бұрын
👍
Great
Thank you so much sir
@1styearengineeringdrawing182
2 жыл бұрын
👍
Thanks for the info but how can we construct it on tangential method
@1styearengineeringdrawing182
Жыл бұрын
Could you clarify your question? The method we follow here is by tangents.
Thank you so much
@1styearengineeringdrawing182
2 жыл бұрын
👍
Cool 👍
@1styearengineeringdrawing182
3 жыл бұрын
👍
If you add up the sides of the hexagon in other words find the perimeter of the hexagon, that is also approximately the circumference of the circle that with the same radius as the length of one of the sides of the hexagon.
@1styearengineeringdrawing182
Ай бұрын
Interesting point. The circle radius equal to one of the sides of a hexagon is the circle circumscribing a hexagon. So the perimeter you have mentioned will be slightly less than the circumference of that circle. The circle drawn in this video will have the circumference which is slightly less than the perimeter of the hexagon. Thanks for your comment.
Tq sir😁 tommorow I have board exam... I can't understand on collage... Now am under stand
@1styearengineeringdrawing182
2 жыл бұрын
Welcome 👍
Thank you
@1styearengineeringdrawing182
2 жыл бұрын
👍
osm
Studying 1sem architecture please 🙏 come back there are few changes in subject please
@1styearengineeringdrawing182
2 жыл бұрын
✔
I think the method is a good one.i would wish u to help me in drawing epicycloid.
@1styearengineeringdrawing182
Жыл бұрын
👍
Sir... Is it needed in every department?... I mean i am in ECE.... Will i need it... Sir another help What else we have to read in 1st year... I just want to prepare for it from the beginning... As my college has not started yet
@1styearengineeringdrawing182
2 жыл бұрын
Yes, basics of engineering drawing is compulsory for all department students. You should obtain the syllabus and important textbooks for other courses.👍
@incognitogamerx4904
2 жыл бұрын
@@1styearengineeringdrawing182 for that do i have to see all the videos of this channel?
@1styearengineeringdrawing182
2 жыл бұрын
@@incognitogamerx4904 few in each chapter at least.
@incognitogamerx4904
2 жыл бұрын
@@1styearengineeringdrawing182 ok thankyou
Tq
Sir please tell projections for diploma
@1styearengineeringdrawing182
3 жыл бұрын
Please explore this channel. There are many videos on projections.✔👍
Can u do circumscribed heptagon?
@1styearengineeringdrawing182
2 жыл бұрын
✔
About circle ayna around the circle ana okkatena
Sir u uploading only drawing please sir upload all subjects
@1styearengineeringdrawing182
2 жыл бұрын
✔
@bigbird4481
2 жыл бұрын
What do you mean by all subjects?
how do you calculate the side length of a hexagon in the circumscribed circle Hi Ivan From Denmark
@1styearengineeringdrawing182
Жыл бұрын
In drawing, the side length is obtained by the geometric method. It may not be exactly to the length you can calculate due to drawing errors. In engineering drawing, the basic dimensions are exact and the derived can be what we get after drawing.
Pentagon, septagon ,octogon, కూడా పెట్టండి
@user-hd1dt8pt7t
Ай бұрын
Athaniki telugu raadhu 😂😂😂😂
@1styearengineeringdrawing182
Ай бұрын
Google translation works
BTW it is an inscribed circle
@1styearengineeringdrawing182
9 ай бұрын
Well, the circle is given and we are drawing a hexagon around the circle, so we call it circumscribing. If you draw a geometric shape inside then you call it inscribing.
Sir plz tell the ruler name
@1styearengineeringdrawing182
5 ай бұрын
Rolling ruler.
Sir we need u please 🙏😢
@1styearengineeringdrawing182
2 жыл бұрын
👍👍
Sir after I have board exam and thank u for it 😅
Isn't this inscribing?
@1styearengineeringdrawing182
Жыл бұрын
Circumscribed because hexagon is drawn outside the circle,
AAP ka galat h ye Jo aap ne banaya h ye inscribed circle h
@1styearengineeringdrawing182
Жыл бұрын
Thanks for comment. This is about circumscribing a hexagon around a circle. Yes, the circle is inside but the original problem was not to inscribe a circle inside a hexagon.
Ayeeee it's wrong daa
@1styearengineeringdrawing182
Жыл бұрын
let me know where? Thanks.
Thank you so much sir
@1styearengineeringdrawing182
2 жыл бұрын
👍